Replies to This Discussion

Permalink Reply by BrianQ. on October 15, 2018 at 12:45pm

Try this one, very easy: https://youtu.be/e24UHnh9DYg

• ▶ Reply

Permalink Reply by Frank Scott on October 15, 2018 at 12:59pm

Thank you BrianQ. You are awesome. I love those Dell Puckett videos, he always has something simple but good. Thanks a million.

• ▶ Reply

Permalink Reply by FoldedSoup on October 16, 2018 at 7:19am

I love coming to this site and having light bulbs go off because of someone else's great idea. I've made a few zero-fret gits, but I never considered using fretwire as the saddle.

Question to others … any major acoustic difference between a fret wire saddle and a bone one? Or, anything else that may cause an unforeseen problem (wiring?) If it's not too different, I may have found a new bridge technique... thanks Dell and CBN!

Cheers!

• ▶ Reply

Permalink Reply by BrianQ. on October 15, 2018 at 2:15pm

You’re welcome, we’re all here to help each other get ‘er done. Cheers 

• ▶ Reply

Permalink Reply by Taffy Evans on October 15, 2018 at 8:20pm

Hi, I have posted a thread on building a basic bridge. All photos. It was called " Building a bridge, the way I do it" . I don't know how you would find it now though, I think it was back in June 2018. 

Taff

• ▶ Reply

Permalink Reply by Frank Scott on October 16, 2018 at 1:11am

Thanks Taff. Is that the post with photos of the ukulele bridge? I did find that one and that bridge looks very nice and sturdy.

• ▶ Reply

Permalink Reply by Webster Miller on October 16, 2018 at 3:00am

You really just need it wide enough to accommodate the overall string width and the correct height for your desired action.  I initially make mine all a bit high and then will adjust them during setup (sand bottom and/or file deeper string slots).   One of the more fun parts of building a CBG is looking around the house/workshop/yard for something different to make the bridge out of.  

I particularly like this one I made from one of my Dog's chew bones:

• ▶ Reply

Permalink Reply by Frank Scott on October 16, 2018 at 9:52am

Now that is funny but it looks good. How did you make the tailpiece or is it just a basic hinge of some sort?

• ▶ Reply

Permalink Reply by Webster Miller on October 16, 2018 at 10:08am

The tailpiece is just a piece of this style of cabinet hinge.   

Both pieces can be used for a complete (tailpiece/bridge) solution:

• ▶ Reply

Permalink Reply by Frank Scott on October 16, 2018 at 10:14am

That is perfect. You never cease to amaze me. You work looks excellent and I have to give you high marks for how all of it looks. Also, thank you for the nice photos. I will have to look into some of these. Very nice that they can be used for either tailpiece or bridge.

• ▶ Reply

Permalink Reply by Taffy Evans on October 16, 2018 at 10:47am

Hi Folded soup, re difference in saddle materials: Normally the harder the saddle, or nut for that matter, the brighter and more sustaining the string response.

So, if I was putting a bridge on a tin top CBG with a piezo pickup, I might choose a bridge with a wood saddle, so as to cut down/limit/tame the brashness or high frequencies from this build combination.

And to change the sound/response in the opposite direction on a wood top box, I would try a fretwire/bone/brass nut or saddle.

Taff

• ▶ Reply

Permalink Reply by Uncle John on October 17, 2018 at 10:54am

Easy basic bridges:  bolts,  bolt and nut, bolt in the groove of a grooved ruler.   Too low?  Put pennies under the bridge. 

• ▶ Reply

• ‹ Previous
• 1
• 2
• 3
• Next ›
• Page