So I lucked into a reallllllly cool looking solid wood box that I believe is all mahogany, it’s a Camacho Connecticut 6X60 20 count box, with a very cool looking black face with the scorpion logo. It’s just crying for a Humbucker and walnut fretboard. The only issue is the top of the box is thick, on the order of 3/8 solid mahog under that beautiful wrapper. The sides and bottom are mahog as well. The bottom is 1/8, and the sides about 3/8 also. My thinking is use the router to chew away the underside of the lid, leaving it full thickness at the periphery, where it closes onto the box, but thinning out the soundboard so it’ll play in acoustic mode also. Any thoughts on the ideal thickness I should make the top? I can preserve the outward appearance by removing the lid from the hinges and routings tge underside, but as it is, the top is deader than a picnic table. 

Views: 403

Attachments:

Reply to This

Replies to This Discussion

I've got 2 the same I'm going to flip them round build with the 1/8 bottom being now the top job sorted to keep it simple , there's no rules in this game . Have fun .

I thought of that, but that black lid with the scorpion in the middle would be so cool looking, lol. 

I just don’t want to destroy the darn thing, and wonder if routing it out but leaving the edge thick will let the top ring? 

The way these boxes are stored,  then  released from captivity , alot of them are dried out ,, and a router may be  a bit violent for them . one lil snag and the top may get torn apart . 

I'd  just pop the humbucker in it and call it an" electric" ,...... and if it still sounds  loud enough as an acoustic , that's a bonus .

When weighing looks and multi  function , sometimes ya cant get the best of both worlds .

but call it electric , and its perfect ;-)

 

Yep that's a good point Pick after my last outing with a router was a train wreck I should of waited till had my carpal tunnel done ... :-(

Hi, I have mentioned this before, thickness is not a real good guide to producing a top, thats if you are looking for a louder more tonefull guitar.

When I'm prepping a top and back for that matter, I look for flexibility. To this end many a luthier will graduate the thickness to be thinner around the outside edge. Of course stiffer tops can be thinned more than flimsy overflxible top. Then braces added to control movement and add stability.

Thats in the guitar world, but we are dealing with box's, but I use the same theories in my build of a CBG.

When I want the best I can get from both worlds, I build the best acoustic sounding top, but mount the magnetic pickup so it goes through the top without touching it.

 Taff 

All good thoughts. When I say router, that’s the short version of a Dremel with a router base using a 1/8” four flute end mill, so it’s not too likely to shake the world apart. Point taken that flexible is a good thing. I think I’m gonna give it a go and work toward around 1/8 inch with the border retained at full thickness. Worst case scenario it ends up a dedicated electric. Thanks folks. 

Well, it turns out that big 3/8 inch thick lid isn’t wood after all. So I routed away about half the thickness, down to 3/16 instead of 1/8, a little leary of going too thin with the cardboard. I used the black border inside the lid as a handy guide to , leave a full rim where the lid contacts the box at the original thickness. Did I mention it’s not wood, but that dense cardboard like a paper covered cigar box, only massively thick? That stuff produces the absolutely nastiest dust imaginable when routed with a four flute endmill at about 2/3 of full speed with a Dremel in a router base, but I got it done, and simply holding the lid on the box and giving it a “knock test”, it sounds a helluva lot better than it did.

Hi, I think that's what is called MDF here, man made fibre. Yep it's killer stuff, as in its not good for you. It will give out a fair  sound though. 

Taff

Hi, I think that's what is called MDF here, man made fibre. Yep it's killer stuff, as in its not good for you. It will give out a fair sound though.
Taff

Since I play through an amp most of the time (because I like loud) and since when I want to play quietly (like when I'm in a hotel room) I want to play very quietly... I've come to the conclusion that, for me, thickness doesn't matter. Makes my life a lot easier.  :D

But kudos to you guys that go for and achieve good acoustic tone and volume.

I hear you. I’m in an apartment with some very nice neighbors downstairs that go to bed early and get up early, so volume is an issue. But during the day nobody else in the building but me.  So on the electric front, I’m about to do a pair of guitars, one fretted, one not, using the three string DeltaBuckers. Eventually I’ll probably  go for a 10w tube amp. I told my son, if I only wanted to play electric, I’d skip the box entirely and use a stubby laminated canoe paddle as the whole darn thing. But I do enjoy acoustic guitar, so I’m trying to make that happen.  

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

A.D.EKER commented on Dar Stellabotta's video
Thumbnail

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

"i See Your ready to Blow away the GRAND STADIUM ! tree strings more of DAR DELIGHT !! Shine Girl !…"
26 minutes ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you for the kind comments Doug! Glad you liked the Picture !"
39 minutes ago
BrianQ. commented on Dar Stellabotta's video
4 hours ago
BrianQ. liked Dar Stellabotta's video
4 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Project Punch!

" Thank ya again Keith!"
7 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Punch Project!

" Thank Ya Keith!"
7 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
8 hours ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
9 hours ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
10 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
10 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
11 hours ago
A.D.EKER commented on Ricky D's photo
11 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->