My CBG is still in its infancy stages and I've cut my neck down so it fits flush with the edge of the top of the cigar box. My perceived dilemma is my strings will set too low and hit my deltabucker pickups. I still have to set in all the above items(strings, pickups) to include an adjustable metal bridge and I don't know if it will give me some room for error. Also I  still have to finish setting the final height on my bone nut to boot so with all those "variables" still in play I don't want to get to the final assembly stage only to tear it down and rout the neck down some more to negate any string and pickup interference . Am I over thinking this or what?

Views: 278

Reply to This

Replies to This Discussion

Nope. Your experiencing 'beginner pains'. There a lot like growing pains. Only with beginner pains you get to decide what the final product looks like. : ) 

Larry Ratliff
I watched a video from Chicken Bone John and he suggests setting the fret board at approximately 1/8 to a 1/4 above the edge of the cigar box so the action isn't to high. Looks like I'm going to have to take some more wood off to bring the fret board up a little higher to set the correct intonation. Does this sound about right to you?
I'm working on CGB #7 right now, but in all honesty I have to admit that #6 wasn't a CBG, but rather a full up Strat. Each and every one of my builds has had learning curve-itis, where I've run full-tilt-boogie into that wall that marks out what I know, what I think I know, and what the reality of the build actually is. Learning stuff all the time, methods of work, sequence of build events (what's gotta come first, what wants attention later) that kinda stuff. And admittedly, as I've progressed, my builds have gotten more and more involved. Patience, and keep your eye on the long ball.
Larry Ratliff
I watched a video from Chicken Bone John and he suggests setting the fret board at approximately 1/8 to a 1/4 above the edge of the cigar box so the action isn't to high. Looks like I'm going to have to take some more wood off to bring the fret board up a little higher to set the correct intonation.
I watch a video from Chicken Bone John and he suggests setting the fret board at approximately 1/8 to a 1/4 above the edge of the cigar box so the action isn't to high. Looks like I'm going to have to take some more wood off to bring the fret board up a little higher to set the correct intonation.

Larry,

I highly suggest doing exactly that.  I now build all of mine with the fretboard 1/4" above the top of the box AND with a neck tilt (1/8 - 1/4" higher at the bridge end of the box).  This gives your picking hand a lot of room btw the strings and the top of the box.

My 1st build where the fretboard was flush with the box:

A latter build with it 1/4" above the box and with neck angle (look at all the space btw the strings and box top):

I now build all my necks with 2 pieces.  It's simply easier to build as notching hardwood isn't exactly easy and you only have to cut one small notch at the body/neck junction for the lid. 

Love those photos Webster. That is how I am trying to get mine rebuilt. I am eager to see how it turns out. Thanks for posting.

Thanks so much, I would rather catch this issue now than when I string it up and find out the action is too high.

Solid Webster 

Like Webster, I go for about a 1/4" above the box and rake the neck a little also, it all helps with intonation, playability and break angle over the bridge, one of the simplest ways to lay it out is to place something on the box , roughly the same height and position you want your bridge set to, then set up a nut the required distance away and run a straight edge between the 2, it will show the string line and from there you can work out box clearance etc by raising or lowering your nut and /or bridge to suit, then at final setting up you just need to lower them a little for better intonation if you set them a touch high in your mock up.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->