I'm building a ukulele for a friend.  I found this great little souvenir teaspoon.  I want to cut off and discard the bowl of the spoon, flatten what's left, and stick it to the middle of the headstock between the tuner posts.  It's pretty small so I can't screw it down and it's also not totally flat on the abck, so Krazy Glue wouldn't be a good option.  I'd usually think epoxy but that might run a bit and look bad.

What would you use to neatly and permanently stick the spoon to the headstock?

Thanks,

Scott

Views: 546

Reply to This

Replies to This Discussion

You could try double sided tape (the foam kind). If you cut it to the exact shape of the spoon handle and head, it shouldn't look funky.

Another idea would be to trace the shape onto the head stock then carefully remove some material so the spoon is slightly recessed in the head stock. That would allow you to use epoxy without worry of it running all over.

A third way would be to epoxy some thin wood strips to the back side. That way you could clean away excess epoxy. Once the epoxy is set, you could use s drop or two of super glue to glue the wood to the head stock. There should be no messy run off with this method.

Lots of options.

I’ve got a bit of a time crunch so I don’t think i’ll Have time to carve into the headstock, but that would look great.  Tape is a possibility but I think the idea of mounting to a small piece of wood is great.  Much easier to control things on a smaller piece. It will also add a nice accent piece of wood  

Thanks,

scott

Loctite Go2 is awesome stuff, I use it for soundhole covers and sticking on decorative stuff like this...

There are new adhesives coming along all the time. This sounds like great stuff.

That Go2 might be my best bet.  I already have a drawer full of other stuff from them :)

Hi, I use the adessive sheets used to fit guitar pickguards, cut to shape and then peel the backing off. I can see a couple of places where  tuning machine screws would fit, they have a nice neat dome head. Or experiment on scrap with the glue you have..

Cheers taff

Adhesive sheets sounds good. I can get screws through, but I’d like to keep it cleaner looking if I can. 

How about... Flatten the bowl of the spoon, and drill small screw hole for tuner sized screw.

The bowl is super thin crap, not worth saving. 

Depending on headstock length and desired placement  .   you may be able to just  drill a hole  into the end of the fretboard (or groove in bottom of fretboard )  and jam the cut end of the spoon  in the  super glued hole .

 

Loctite Go2 / clear Gorilla glue 

Korrigan that box is sick!!!!

Thanks Brian.  : )

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

A.D.EKER commented on Dar Stellabotta's video
Thumbnail

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

"i See Your ready to Blow away the GRAND STADIUM ! tree strings more of DAR DELIGHT !! Shine Girl !…"
6 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you for the kind comments Doug! Glad you liked the Picture !"
6 hours ago
BrianQ. commented on Dar Stellabotta's video
10 hours ago
BrianQ. liked Dar Stellabotta's video
11 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Project Punch!

" Thank ya again Keith!"
13 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Punch Project!

" Thank Ya Keith!"
13 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
14 hours ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
15 hours ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
16 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
16 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
17 hours ago
A.D.EKER commented on Ricky D's photo
17 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->