Replies to This Discussion

Permalink Reply by JL on July 16, 2018 at 2:19am

add a volume pot to the instrument so you can dial down the signal strength going into the amp.

• ▶ Reply

Permalink Reply by Joe Williams on July 16, 2018 at 5:43am

Appears to be a "HOT" humbucker.

• ▶ Reply

Permalink Reply by Joe Williams on July 16, 2018 at 5:40am

Did that, and it completely overpowers the little amps with ANY input at all. I need to educate myself much more about mag pickups. This one puts out massively more power than the piezos  I've been using. Wilkinson is the brand, btw.

• ▶ Reply

Permalink Reply by Taffy Evans on July 16, 2018 at 12:41pm

HI, that's strange, in my experience a pickup with only send to the amp what the volume pot allows it too. Do you have to correct value pot and wired correctly? 500k pots normally for a humbucker but 250k work but  with different tone.

You also have a volume control on the amp, I would think. They are very small amps, and I don't think they would do a powerful pickup justice. What's that saying "horses for Courses" or something

Taff

• ▶ Reply

Permalink Reply by Joe Williams on July 16, 2018 at 3:24pm

The pot is working fine, but with this pickup, the little amps fuzz up with ANY volume, any at all.

• ▶ Reply

Permalink Reply by Korrigan on July 16, 2018 at 4:20pm

Grounding or shielding issue maybe?

• ▶ Reply

Permalink Reply by Taffy Evans on July 16, 2018 at 4:53pm

Hi, well if things are ok at the guitar end, you may have to think about building amps suitable for the higher output of a humbucker. Also consider that the little speaker you are using cant handle the extra punch either.

Taff

• ▶ Reply

Permalink Reply by Joe Williams on July 17, 2018 at 4:53am

I'm pretty much strictly a front porch player. I love the tiny amps much more than the big noise. Went back to the music store this morning and learned that this is a great big 2 coil humbucker with massive built in gain. Made for metal, not front porch. Got a little single coil to replace it. I'll put it in this evening and see what happens.

• ▶ Reply

Permalink Reply by Cause the Blue rat on July 17, 2018 at 9:41pm

A volume pot actually helps the sound of it as well. Without it the mag can get a bit shrill. 

Wilkinson is a VERY good sounding pickup company. One of a hand full of mid priced pickup makers who can match and even out preform some of the bigger brands. If it is a hot pickup then a volume knob is your best bet. You and me have the same taste. I really don't like high output pickups either.

Ok. The little single coil will need a volume pot as well. "A-250K' or audio taper 250K.  Real easy to wire up. If you find the pickup still has to much volume you can try lowering it. You could even put it under your box top. As long as your strings are no more than 1/2 above the top. 

• ▶ Reply

Permalink Reply by Joe Williams on July 18, 2018 at 4:25am

I recognize their quality, this model is just way overpowered for my purposes.

• ▶ Reply