Replies to This Discussion

Permalink Reply by Korrigan on June 28, 2018 at 2:39am

Depends how much tension you like, what string material you like, if you plan on playing slide or fretting or both, and what octave you want to tune to. 

I like about 15lbs on each string for a happy medium between fretting and sliding , nickel plated strings and higher pitches on shorter scales so I would probably start by trying...

F3 0.024"w    C4 0.014"p   G4 0.010"p

Check out this string tension calculator.

• ▶ Reply

Permalink Reply by Austin K on June 28, 2018 at 3:09am

Thank you for your insights.  I wasn't aware that there was any such thing as a string tension calculator , lol. I must admit that while I enjoy this site immensely I often find it difficult to navigate and find things on.

• ▶ Reply

Permalink Reply by Korrigan on June 28, 2018 at 4:00am

No problem Austin and yes, the search on CBN is pretty bad, usually 20 pages of things not related to what I'm looking for.  Instead of using the CBN search I use Google and it usually points me to the right info here. Lol

• ▶ Reply

Permalink Reply by Austin K on June 28, 2018 at 4:12am

Lol, that's a good idea, I will probably start doing that.  Lots of great info and people on CBN, I just wish it was a little more user friendly.

• ▶ Reply

Permalink Reply by Austin K on June 28, 2018 at 4:52am

So I decided to go with F2, C3, and F2. Ironically figured for 15 lbs. tension it's in the same ballpark as the GDG tuning I was using! Which is G2, D3, and G3. I like the punchy sound of the F2, and best of all I didn't have to change strings ! Now we'll see how well it stays in tune with this tuning.

• ▶ Reply

Permalink Reply by Korrigan on June 28, 2018 at 4:55am

You mean F2, C3, F3 right?

• ▶ Reply

Permalink Reply by Austin K on June 28, 2018 at 5:02am

Lol, yes. That's what I thought I wrote.

• ▶ Reply

Permalink Reply by Korrigan on June 28, 2018 at 5:26am

Ok, thought you might have been going for a very bassy tuning.  : )

• ▶ Reply

Permalink Reply by Austin K on June 28, 2018 at 5:39am

No but I'm thinking about trying F3, C4, F4 just to see what it sounds like. 

• ▶ Reply

Permalink Reply by JP Lace Master on June 28, 2018 at 9:49am

I've a Canjo tuned to FCF, good low growl in the tone. you're best bet (my experience anyway) is to Tune an A string down to F and combine that with the C tuned C string and F tuned G string. I'd go with heavier gauge strings to get a lower growl. It is just you standard open G tuned down to open F.

• ▶ Reply

Permalink Reply by Austin K on June 28, 2018 at 9:57am

You mean a C tuned D string right? That's what I got going on, ADG tuned to F2, C3, F3. The strings I got on it now are light gauge but I will probably go heavier when I decide to change them. Thanks for the advice. 

• ▶ Reply

Permalink Reply by JP Lace Master on June 28, 2018 at 10:01am

I did mean C tuned D string, yes.

• ▶ Reply

• ‹ Previous
• 1
• 2
• Next ›
• Page