Replies to This Discussion

Permalink Reply by wizzo on February 19, 2018 at 11:16am

Thank you Jerry, good information, I will keep this in mind. happy leveling and G Day !

• ▶ Reply

Permalink Reply by 3qt17g550yh6r on February 19, 2018 at 11:55am

Hey Wizzo, I do not make guitars for sale. I do however make soap cutters. The wires are tightened using guitar tuners. Imagine if you will a giant egg slicer, my latest one went to South Africa. I buy my tuners in bulk from China. Anyway, if you want to improve the quality of your inexpensive tuners you remove the gear and repress it onto the shaft. You can find a tutorial for this on page 47 (I think)  of the Ray Jacobs free downloadable book " making a Ray Jacobs Rocky Mountain dulcimer" . This is printed by handprint press.com. You can easily find it by searching "make a ray Jacobs Rocky Mountain dulcimer" it will be the first one at the top of the page. Yes it is a good read. Hope this helps! Would love to see you first build!!! 

• ▶ Reply

Permalink Reply by Richard Dean on February 19, 2018 at 12:21pm

Page 42 and here's a link to the download if anyone's interested.

Rocky Mountain Dulcimer

• ▶ Reply

Permalink Reply by 3qt17g550yh6r on February 19, 2018 at 12:44pm

Thanks Richard!!!

• ▶ Reply

Permalink Reply by wizzo on February 20, 2018 at 3:27am

Thank you Richard I just downloaded it  and will read. Thanx.

• ▶ Reply

Permalink Reply by wizzo on February 20, 2018 at 3:26am

Thank you rose, I will check this book out for sure.Thank you for the direction. Tim

• ▶ Reply

Permalink Reply by Mark Bowen on February 27, 2018 at 3:13pm

I've had no problems with the CB Gitty tuners, but I have noticed a lot of variation in how 'tight' they feel. Understand one thing - all these tuners are WORM GEAR DRIVEN MECHANISMS. They cannot slip. They simply cannot slip. If one of these goes out of tune it is not the fault of the tuner, it is either faulty stringing (too few wraps), poor string anchor at the tail stock, something yielding (top, bridge, neck), or you haven't played the instrument in a long time!

The difference in price gives you a difference in feel and precision. Some of the cheap CM Gitty tuners feel as nice as Grovers, but that's dumb luck. Both will let you tune the instrument on pitch without difficulty, so you decide how much money you want to spend.

• ▶ Reply

Permalink Reply by wizzo on March 1, 2018 at 3:36am

Thank you Mark Bowen for giving some input. I have decided the economy tuners will be my start and now I am deciding on the standard economy vs the shane speal versions. Thank you again. Tim

• ▶ Reply

• ‹ Previous
• 1
• …
• 3
• 4
• 5
• Next ›
• Page