Replies to This Discussion

Permalink Reply by Taffy Evans on December 12, 2017 at 12:39pm

Hi Mark, try search Guitar Electronics.com. They have diagrams and parts as well. I've wired similar to what you mention, but can't find the info.

cheers Taff

• ▶ Reply

Permalink Reply by Mark Taylor on December 12, 2017 at 3:58pm

I just created this in Visio.  Can you guys please review?

Thank, Mark

Attachments:

• CBG_Wiring.jpg, 70 KB

• ▶ Reply

Permalink Reply by Mark Taylor on December 12, 2017 at 5:02pm

Updated with better grounding. Does it look correct?  Especially review the series/parallel switching of the humbucker?

Thanks,

Mark

Attachments:

• CBG_Wiring.jpg, 72 KB

• ▶ Reply

Permalink Reply by Taffy Evans on December 12, 2017 at 5:44pm

Hi, I cant tell by just looking at a diagram, I'd have to wire it up and see. Just one observation tho. With a humbucker 500k pots would normally be used, unless you wanted the different tone the 250k pots create. Taff

• ▶ Reply

Permalink Reply by Mark Taylor on December 12, 2017 at 11:15pm

Fixed the error with the tone wiper and cap. Any other errors?

Attachments:

• CBG_Wiring.jpg, 72 KB

• ▶ Reply

Permalink Reply by Mark Taylor on December 13, 2017 at 2:28pm

Latest version

Attachments:

• CBG_Wiring.jpg, 76 KB

• ▶ Reply

Permalink Reply by Mark Taylor on December 17, 2017 at 10:15pm

I bought 500k pots and a .022uF cap. Will put two piezos under the bridge (in hot glue?) wired in parallel to the buffer circuit. Should that work?

• ▶ Reply