So I got my lap steel painted up, ready to go, install the humbucker and it doesn't buck.. it hums

I had the issue in my CBG with a single coil and attaching foil to ground all internals solved it.

How might I quiet my lap steel with no insides to shield?

It is wired correctly, and will quiet when I touch the jackplate or pickup

Views: 370

Replies to This Discussion

Sounds like you need to ground your strings Andy, if you have a metal bridge, try a temporary wire from the jack nut to the bridge and see if that helps, if it does you will need to make something permanent, ideally from the ground that currently goes to the jack, disconnect it from the jack, then connect it to the bridge, then add another wire from the bridge to the jack, doing it that way should safeguard against creating a ground loop

There's no metal bridge with the CB Gitty kit.

I just looked at the kit, i see what you mean, as it's a humbucker, which i didn't notice on your original post, it's unlikely to be a shielding issue, it is more likely either interference from an outside source, flouro lights etc, or a grounding issue, try the test as i said, but connect the wire from the jack plate to some aluminium foil contacting all strings behind the bridge, if that solves the issue, you need to make something permanent, an easy way would be to place a small piece of metal under the guitar where the string ends are, with all strings seating on that metal through holes, then wire the metal to your ground lead to the jack. But 1st eliminate any electrical interference by turning lights off, and plugging into different sockets, even in other rooms, and see if that helps.   Just had another thought, an even easier way to test would be to just strip a wire 3 or 4 inches, wrap it around 1 string, then under,over each string making sure it contacts, then connect the other end to the jack plate, or even just hold it against it while you test

I just finished a lap steel. No bridge either. Put a metal plate on the back that the strings go through. On the inside or the side facing the timber I soldered a wire which is soldered onto the volume pot..could be soldered onto any negative wire maybe. Anyway in effect I have earthed the strings/bridge. It worked for me
Thanks for the input on this. So the kit comes up a bit short on the electronics it seems.
I am considering using a large bolt in place of the bridge, like you see on a lot of cigar box guitars. Connecting a wire between that and the ground lug on the jack might be the way to go for me

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Eliminating hum

Started by Andy R. Last reply by Andy R Jul 7, 2017. 5 Replies

Pickup for Lapsteel

Started by Lou "cubancigar2000". Last reply by Peter Hendley Jun 30, 2017. 4 Replies

String spacing on the 2 x 4 lap steel

Started by Andy R. Last reply by Andy R May 18, 2017. 3 Replies

Latest Activity

A.D.EKER commented on Dar Stellabotta's video
Thumbnail

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

"i See Your ready to Blow away the GRAND STADIUM ! tree strings more of DAR DELIGHT !! Shine Girl !…"
3 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you for the kind comments Doug! Glad you liked the Picture !"
4 hours ago
BrianQ. commented on Dar Stellabotta's video
8 hours ago
BrianQ. liked Dar Stellabotta's video
8 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Project Punch!

" Thank ya again Keith!"
10 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Punch Project!

" Thank Ya Keith!"
10 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
12 hours ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
12 hours ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
13 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
14 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
14 hours ago
A.D.EKER commented on Ricky D's photo
14 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->