I have consolidated all of the information that was originally available here (along with much more) into a complete book.  You can download it at the following link for free.

http://joshuagayou.com/downloads/AdvancedCigarBoxGuitarConstruction...

Views: 856

Replies to This Discussion

How did you curve the underside of the headstock (as seen in picture 2)? It looks more like a continuous piece of wood rather than a scarf joint.
The long, painful way to do it is by blending the joint with a half-round file. I roll it out over a bench top belt sander.

Scotty C. said:
How did you curve the underside of the headstock (as seen in picture 2)? It looks more like a continuous piece of wood rather than a scarf joint.
Josh is there any reason why you wouldn't shape the headstock before you make the scarf joint? It would seem that it would sit better being flat.

Brett
Josh, thanks for takeing the time out of your busy day to help everyone.

Cheers
Bob:)
Yes, if you leave it as square piece of wood, it's a lot easier to line up and get straight when you clamp the pieces together (when you make the scarf). If you have a cut headstock (especially if you do asymmetrical heads like I do) and you try to mate it up to the neck and clamp it, it might look just fine up close when you line it up but when you step away you'll realize that it bends off in one direction. If you clamp two square pieces together it's a lot easier to see that everything is straight because you can just lay a straight edge across it after you put the clamps on.

Brett Morgan said:
Josh is there any reason why you wouldn't shape the headstock before you make the scarf joint? It would seem that it would sit better being flat.

Brett
No worries :)

Bob Harrison said:
Josh, thanks for takeing the time out of your busy day to help everyone.

Cheers
Bob:)

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Building a Cigar Box Guitar Part 1 - Intro

Started by Josh Gayou (SmokehouseGuitars). Last reply by Dan Mullen Feb 22, 2014. 6 Replies

Part 5 - Tapered Necks - Carving

Started by Josh Gayou (SmokehouseGuitars). Last reply by Mike Brobeck Oct 29, 2011. 7 Replies

Part 5 - Necks - Scarf Joints

Started by Josh Gayou (SmokehouseGuitars). Last reply by Josh Gayou (SmokehouseGuitars) Feb 23, 2011. 12 Replies

Building a Cigar Box Guitar Part 2 - Tools

Started by Josh Gayou (SmokehouseGuitars). Last reply by Wiley Rutledge Dec 14, 2010. 6 Replies

Building a Cigar Box Guitar Part 3 - Supplies

Started by Josh Gayou (SmokehouseGuitars). Last reply by ledbelly Nov 16, 2010. 2 Replies

Part 4 - Design

Started by Josh Gayou (SmokehouseGuitars). Last reply by Josh Gayou (SmokehouseGuitars) Nov 9, 2010. 2 Replies

Alternate Neck Joints - The V Joint

Started by Josh Gayou (SmokehouseGuitars). Last reply by colin mcgrath Nov 5, 2010. 6 Replies

Why You Shouldn't Listen Too Closely to the "Experts"

Started by Josh Gayou (SmokehouseGuitars). Last reply by colin mcgrath Nov 5, 2010. 9 Replies

Tung Oil Finish

Started by Josh Gayou (SmokehouseGuitars). Last reply by Fitzhugh Sep 12, 2010. 1 Reply

Part 5 - Necks - Fret Work

Started by Josh Gayou (SmokehouseGuitars). Last reply by Fitzhugh Aug 21, 2010. 23 Replies

Part 5 - Tapered Necks - The Fretboard

Started by Josh Gayou (SmokehouseGuitars). Last reply by Josh Gayou (SmokehouseGuitars) Jul 30, 2010. 5 Replies

Guitar Wiring Basics

Started by Josh Gayou (SmokehouseGuitars). Last reply by ian frazier May 14, 2010. 2 Replies

String Intonation Explained

Started by Josh Gayou (SmokehouseGuitars) Feb 10, 2010. 0 Replies

Part 6 - Finishes - French Polish

Started by Josh Gayou (SmokehouseGuitars) Feb 8, 2010. 0 Replies

Improvised Bench Dogs

Started by Josh Gayou (SmokehouseGuitars). Last reply by HOGS GRUNT Oct 11, 2009. 1 Reply

mini-humbucker

Started by bucky. Last reply by bucky Dec 31, 2008. 3 Replies

Latest Activity

Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
42 minutes ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
1 hour ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
1 hour ago
A.D.EKER commented on Ricky D's photo
1 hour ago
A.D.EKER commented on A.D.EKER's video
1 hour ago
Keith Rearick liked Doug Thorsvik's video
5 hours ago
Keith Rearick liked A.D.EKER's video
5 hours ago
Keith Rearick liked Doug Thorsvik's video
5 hours ago
Keith Rearick liked Ricky D's photo
5 hours ago
Keith Rearick liked Ricky D's photo
5 hours ago
Keith Rearick liked Ricky D's photo
5 hours ago
Keith Rearick liked Ricky D's photo
5 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->