Brand new to the site, wanted to show my latest build, a long scale fretless 2 string bass.

Started with a Tabak box, fully braced, then cut the neck out of red oak. Had some rosewood left over from a long ago project so I made a fret board from that. Fret markers are simply cut with the fret saw into raw wood to contrast against the espresso colored stain. Dot markers on the side are done the same way, using my dremel press and a small 1/8" cutter bit.

Used a CBGitty 4 pole enclosed pickup (prewired with a jack and volume control), some imported Strat style individual bridges and a hand cut bone nut. She has 24 "frets" and the intonation ended up near perfect right out of the box. I strung her with DR coated ultra lights, using the 45 and 65 gauge strings, tuned to E and A. Action is nice and light, and just a tad high for my tastes, so I'll be working over the bridges and the nut.

Overall, I'm pretty happy with the results, can't wait to get started on the next one.

 

Views: 943

Replies to This Discussion

34" scale was used for this one. It's a pretty good reach, nut to front of the box is 27", with the other 7" coming from there back to the bridges.

Cool ,What's the overall scale length? I just notice the piece of wood on the lid covering the coffee infused "Tobacco" print?

Just a J-Bass style finger rest. Not sure why I added it, but it does help.

Cool ,turned out nice. Those "Tabak" boxes are some tuff/well made boxes. I have several of them ,just haven't used one yet.
Nice!

Very nicely done. First build, eh? Obviously you're no stranger to woodworking.

I've done a few things in the past, but my hot rodding hobby usually wins most of my free time. Love to tinker on my cars.

I am also looking to make a bass as my first build.  Can we get a picture of inside the box?  What size is the block of wood that you used for the neck?  Does the neck go through so that the bridges are attached to the neck?  Is the fingerboard required, or could you play it with high action or with a slide.  Sorry for so many questions!

Hey Ron! Here's a couple of pics of the inside of the box. The braces to mount the neck are just short pieces of 1x3 red oak stock cut to fit the box and notched to fit the neck. The neck is then set with Titebond glue and I add a screw on each end just to help clamp it while it dries.

The bridges on mine are not attached to the neck, but are secured to the box top itself with short machine screws and locking nuts. There really isn't a lot of tension on the strings, a lot less than I thought there would be actually, so it seems this method will work fine, and I like to be able to have easy access to the inside of the box in case I need in there. I do add a small wood screw in the lower rear corner of the top, to secure it to the box.

The fingerboard is certainly not required, I just think it gives a more finished look to the neck. Plus, it makes the neck a little bit thicker and easier to hold on to while playing. Even without the fretboard, the action wouldn't be that high. You'd simply adjust the size of the opening in the box where the neck goes through it so that the top surface of the neck would end up flush with the top of the box.

As far as playing it with a slide, that is honestly something that never even occurred to me. I don't see why you couldn't though, and now I'm going to have to go try it!

Let me know if you need anything else, glad to help!

Bryan 

Bryan, thank you for the pics! I can understand the notch in the neck for the pickup, but why the notch where the bridge mounts? Wouldn't it have been better to screw the bridges directly to the neck?

It would definitely be stronger screwed directly into the neck. I was originally planning a different bridge and a 2nd pickup, so that's why there's a big cutout under there. Just too lazy to build a new neck for it!

Also, on this build, I used a Tabak box and they are built like mini bank vaults. The wood is much thicker than a standard box, so the bridge is very secure like this.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Cigar box a little different

Started by Phil Farabough. Last reply by Phil Farabough Nov 10, 2018. 10 Replies

first bass build

Started by Patrick. Last reply by BrianQ. Nov 8, 2018. 6 Replies

looking for alternate tunings-

Started by Daniel Walter. Last reply by Ken Hutchinson Oct 14, 2017. 16 Replies

Bass build help

Started by Ro'Nique Staley Mar 22, 2017. 0 Replies

My first bass build

Started by Bryan Putnam. Last reply by Richard Haas Dec 2, 2016. 15 Replies

Building my first bass

Started by Henry S. Last reply by TN Twang Nov 30, 2016. 11 Replies

fingerboard question(s)

Started by Euraquilo. Last reply by Fomhorach Nov 1, 2016. 6 Replies

3 string bass questions

Started by Euraquilo. Last reply by Euraquilo Oct 31, 2016. 18 Replies

3 String Cigar Box Bass Guitar Parts

Started by Will T. Last reply by Murdoc_420 Jul 16, 2016. 3 Replies

Bass strings??

Started by jeffrey ross. Last reply by jeffrey ross Mar 25, 2016. 13 Replies

Magnetic vs Piezo pickup

Started by PhilUSAFRet. Last reply by Murdoc_420 Mar 25, 2016. 8 Replies

Weed eater strings and tuning.

Started by Poppy. Last reply by Murdoc_420 Feb 29, 2016. 7 Replies

Bass Uke string question(s)

Started by Lane Martin. Last reply by Where's Uranus? Jan 7, 2016. 6 Replies

Looking for 2 string bass plans

Started by Mike. Last reply by Mike Jan 6, 2016. 8 Replies

UBass strings

Started by Bobby Fields. Last reply by Bobby Fields Dec 11, 2015. 3 Replies

First bass build got a few questions .

Started by Piht Bull (Delta Dawg Guitars). Last reply by Scott aka Farmer Ted Apr 23, 2015. 23 Replies

bass frets...

Started by john mackay. Last reply by john mackay Feb 4, 2015. 4 Replies

Latest Activity

A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you Poorness ! for loving it ! appreciated!"
13 hours ago
Southern Ray replied to Timothy Hunter's discussion just came accross this pickup idea on youtube.
" Very interesting. Thank you Timothy!"
13 hours ago
Kent Thurston updated their profile
14 hours ago
Southern Ray posted a photo

Punch Project!

She now sports gold metal CBGitty knobs, speaker and an Artec 2.5 watt speaker. Finished this in…
14 hours ago
Southern Ray posted a photo

Project Punch!

Gonna finally get back on this long-delayed project that is more than half complete. (The matching…
15 hours ago
Poorness Studios liked A.D.EKER's video
17 hours ago
BrianQ. left a comment for Rob (Uker) Porras
"Hope this helps?"
17 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"I appreciate the kind words Papa D! I have always loved the look of these cigar boxes. Glad to have…"
19 hours ago
A.D.EKER commented on A.D.EKER's video
23 hours ago
A.D.EKER posted a video

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

The recorded History By Alan Lomax for the library of Congres of the Blues, from Mc Kinley Morganfield (Aka Muddy Waters) the in this take recorded Tribute ...
23 hours ago
Papa D commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"Beautiful..Nice work Doug.."
yesterday
Papa D commented on Papa D's photo
Thumbnail

american1 Sun Glo

"Thanx AGP & Doug..  4 more coming soon"
yesterday

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->