I got a large cookie tin from my mother in law(4" x 12" x 9") and decided to do a resonator bass without frets.

Thinking about using a Uke type strip Piezo, P Bass Pickups, 3-way switch, 250k volume and tone pots with a .047uf cap. Was thinking of using regular Bass strings for 4 string bass.

Using some square table legs(2 & 1/4" x 1 & 3/4" x 21") for the neck - bolted to a through the tin piece. The through the tin piece will have a hollowed out area at the end for side mounted tuners of some kind, may get actual tuners - may make something. The string ends will mount at the nut end of the neck like a Steinberger Bass.

Views: 719

Replies to This Discussion

A pic of the tin.

 A pic of the table legs.

Through piece in the tin pics and a mock up of neck attached pic.

I'm going for 30" scale. will use a brass bolt for the nut and a steel bolt for the bridge with the strip piezo under the bridge and the Pbass pups close to the neck.

These table legs being 2 & 1/4" wide are making me rethink my plans. A BassVI is really starting to nag at me. Maybe a set of 12 gauge strings and a 28" scale instead of the 30" scale. If I go that route I will have to rethink the pickups, Humbucker(coil tapped) in the bridge, strip piezo under the bridge and a P90 in the neck with 3 on/off toggles and 3 separate volumes?

I decided to stick with the regular fretless bass idea, but will be 5 strings instead of 4. Not sure on scale yet, going back and forth between 28" and 30" scales.

Thinking of doing a low impedance pickup like the ones that Wayfinder and Buggy have made. Might also add some J Bass pups, Rondo has a set for 19 bucks.

Got the through piece in the tin with support blocks and cut out a channel for the tuners. May use some eye bolts for the tuners. Probably will use some metal supports for the sides at the tuners since the cut out is so large. Started drilling mounting holes for the neck.

Got the neck attached. Time to remove the neck and move on to shaping the neck.

Started work on the neck yesterday. Cut a channel for the 1/4" square steel non-adjustable trussrod. I usually glue them in to stop rattle from occurring, Had one guitar neck develop a bad back bow when I glued the rod in, so this time I stuffed tooth picks on each side to keep it steady and from rattling.

Then I started forming the back side. First I trimmed the edge with a 1/2" roundover bit in my router. Then I use a 1/2 round rasp file(round on one side flat on the other), utility knife blades(used as scrapers) and sandpaper. Got one side mostly done, should be completely done with the neck in a couple days.

I managed to get my tuners.

For some reason my last pics and post ended up on the comment wall.

Got the neck shaped.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

what defines a cigar box, baritone guitar

Started by Tim Pannabecker. Last reply by Paul Craig Nov 1, 2019. 18 Replies

Short Scale Resonator Bass Build

Started by Paul Craig. Last reply by Paul Craig Jun 7, 2019. 28 Replies

My latest build

Started by Donny Bell. Last reply by Reg Seward Mar 31, 2018. 2 Replies

Baritone a la fender bass VI

Started by Adam Crofts. Last reply by William J Russell Oct 22, 2015. 2 Replies

Joining Lumber

Started by Where's Uranus? May 22, 2013. 0 Replies

Latest Activity

A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you Poorness ! for loving it ! appreciated!"
11 hours ago
Southern Ray replied to Timothy Hunter's discussion just came accross this pickup idea on youtube.
" Very interesting. Thank you Timothy!"
11 hours ago
Kent Thurston updated their profile
12 hours ago
Southern Ray posted a photo

Punch Project!

She now sports gold metal CBGitty knobs, speaker and an Artec 2.5 watt speaker. Finished this in…
13 hours ago
Southern Ray posted a photo

Project Punch!

Gonna finally get back on this long-delayed project that is more than half complete. (The matching…
13 hours ago
Poorness Studios liked A.D.EKER's video
15 hours ago
BrianQ. left a comment for Rob (Uker) Porras
"Hope this helps?"
15 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"I appreciate the kind words Papa D! I have always loved the look of these cigar boxes. Glad to have…"
18 hours ago
A.D.EKER commented on A.D.EKER's video
21 hours ago
A.D.EKER posted a video

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

The recorded History By Alan Lomax for the library of Congres of the Blues, from Mc Kinley Morganfield (Aka Muddy Waters) the in this take recorded Tribute ...
21 hours ago
Papa D commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"Beautiful..Nice work Doug.."
yesterday
Papa D commented on Papa D's photo
Thumbnail

american1 Sun Glo

"Thanx AGP & Doug..  4 more coming soon"
yesterday

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->