Hey everyone. 

I've been on CBN for a few months but this is only my 2nd post. 

I came across CBN after buying a cheap nylon acoustic before christmas to learn on and decided I could build one better myself. I haven't yet made a cigar box guitar but I have made a playable custom guitar thats suits what I need at the minute. Something I can put in my rusksack when I'm on my motorbike that I don't have to worry to much about. It had to be made mostly from materials I had already. 

I've ended up with a travel style electric guitar made from a piece of 2x4 joisting timber. It is a headless guitar with classical style tuners with slots. The finger board it made from a piece of marine ply with nails for frets. The pickup is a handwound "Flat humbucker" style pick up.This is one area I cheated with materials to hand as I bought magnet wire and magnets. The bridge is wooden dowel that has been halved and sectioned so I can adjust the intonation of each string. I'm using small personal stereo jack plugs as I already had a nice length of wire already. It runs through a transistor pre-amp in a touch-light casing. Through to "The Boss" amp which uses a 2.5w LM380 amp chip. The coffee can is a speaker box with a computer speaker in. There is also a big stereo speaker in the back which has a jack plug to use instead of the coffee can speaker if I want a bigger sound. 

The coffee can does me when I'm out and about but It sounds great through the old hifi speaker. 

This is my first electric guitar so for me it sounds great. I'm as new to playing guitar as I am building them so I'm just happy I have a usable and playable guitar to practice on. 

I have used a wider "Nut/Zero Fret" spacing which I'm finding really easy to learn with. The strings have a slightly wider spacing when compared to my girlfriends acoustic. 

Although as expected it is bowing a little bit since I took more wood off the neck to make it more playable so I thing I may be stripping it down and installing a t-bar truss to counter act the string tension as I said as long as I have something playable I'm happy with this.

I'm already planning my next build. So many options. I just have to make sure I leave time to learn to play as well :-)

Views: 314

Replies to This Discussion

That's an ambitious first build.

You could cut a channel on the back side of the neck, put a steel bar in and fill the rest in with a strip of wood like Fender does their "Skunk Stripe".

i, too, made my first home-built guitar from stuff i had "laying around"...my introduction started with an old Gibson electric guitar neck i picked up off the floor from a temperamental guitar player in a band that played at the bar i frequented back in the day [yes, there is a story to go along with that]. i hung on to that guitar neck, always telling myself i would take the time to use it for something. last year i finally got around to actually building my own instrument. i have, over the years, bought acoustic guitars with the intention of playing, but most of the time, those guitars would just sit in the corner, ignored. my playing skill level only getting to the point of being annoying. haha. 

when it came time to start putting the guitar together, i watched many youtube videos, read many articles and anecdotes on web sites like Cigar Box Nation, and even talked to several local people who had more experience than i at the art of the Luthier,  and put together what i thought was a pretty clever guitar. it was definitely a learning experience for me, if nothing else, and gave me the basic knowledge to tackle building another, much more refined instrument completely from scratch...layering hardwoods for the neck, assembling the body for the right depth of sound, and even hand-cutting my own nut and bridge from bone. the only new parts being the chrome tuning pegs and strings.

this experience has turned into sort of an addiction for me. i am always cruising second hand stores, yard sales, and used instrument sale ads looking for new project ideas. i have picked up several acoustic guitars and even an electric Stratocastor on the cheap, that have been damaged one way or another, with the intention of using them for parts, but have also managed to fix several of them....giving me a small collection of pretty decent guitars of my own. don't be surprise if you catch the same bug the rest of us have, and you end up making several more guitars....i think some of us might need an intervention. haha..   

Yes your right rob. I am already planning my next guitar build. I've just ordered a nice rosewood fingerboard blank, some proper fret wire and I'm going to source so hard wood to make a "posher" version of my guitar. I don't need to rush because I need something to play on now as I have something to practice on. 

I've also already promised my girlfriend I'll make her, her first electric guitar although that will have to be more "guitar" looking for her to like it. 

I have a ton of ideas but not enough time to build them all :-)

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

BO Diddly Tribute Guitar

Started by Paul Craig. Last reply by Paul Craig Dec 15, 2018. 14 Replies

Headless Travel Guitar

Started by Tom T. Last reply by Mike Simpson Dec 10, 2018. 5 Replies

My second build.

Started by Dave Streeb. Last reply by Paul Craig Sep 13, 2018. 3 Replies

New Build: Metal Body Resonator

Started by Tom T. Last reply by Paul Craig Jul 12, 2017. 16 Replies

New to CBG Building

Started by Ken Frederick. Last reply by Ken Frederick Nov 2, 2016. 3 Replies

Started out to build a neck.

Started by Tom T. Last reply by Tom T Sep 4, 2016. 9 Replies

Hello guys looking for advice

Started by Philip Hale. Last reply by J.D. Sep 4, 2016. 5 Replies

My First Six-String Build.........

Started by Tom T. Last reply by Tom T Jul 8, 2016. 8 Replies

Smoked Salmon Gift Box 6-String

Started by Dan Vines. Last reply by Dan Vines May 20, 2016. 6 Replies

Neck sources

Started by Mark Werner. Last reply by J.D. Apr 19, 2016. 2 Replies

My first playable 6 string

Started by Nick Johnson. Last reply by Nick Johnson Mar 14, 2016. 3 Replies

6 String License Plate Build

Started by Paul Craig. Last reply by Paul Craig Jan 25, 2016. 25 Replies

Which Box.............

Started by Tom T. Last reply by doggylv . Oct 8, 2015. 3 Replies

6 String Boxes

Started by Tom Gilreath. Last reply by Bob Marioni Apr 30, 2015. 6 Replies

6 String bridge?

Started by Alex Barrett. Last reply by Dan Vines Feb 3, 2015. 3 Replies

First timer. Wine box resonator: electric possible or not?

Started by George Everet Thompson. Last reply by George Everet Thompson Nov 22, 2014. 5 Replies

reasonably six string

Started by Mal Chilvers. Last reply by Randy S. Bretz Oct 25, 2014. 1 Reply

time to build another 6-string,,,

Started by GARAGE HERMIT. Last reply by GARAGE HERMIT May 26, 2014. 6 Replies

Latest Activity

BrianQ. commented on Dar Stellabotta's video
2 hours ago
BrianQ. liked Dar Stellabotta's video
2 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Project Punch!

" Thank ya again Keith!"
4 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Punch Project!

" Thank Ya Keith!"
5 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
6 hours ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
6 hours ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
7 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
8 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
9 hours ago
A.D.EKER commented on Ricky D's photo
9 hours ago
A.D.EKER commented on A.D.EKER's video
9 hours ago
Keith Rearick liked Doug Thorsvik's video
12 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->