Replies to This Discussion

Permalink Reply by Skeesix on January 9, 2010 at 4:41pm

Yes, I have the same problem, especially since I use my pinky. I finally found a Dunlop slide that I like pretty much which is the heavy wall, short, small size.

http://accessories.musiciansfriend.com/product/Dunlop-212-Pyrex-Gla...

Permalink Reply by bemuzic on January 9, 2010 at 10:27pm

I had the same problem... got one of these with 18mm diameter...lovely sound, but had to stuff a bit of foam down it as still too large : -/
http://www.diamondbottlenecks.com/DB08/index.asp?n=26
Next I got a MojoBone Works one from Randy Bretz (he's here on the Nation)....he will custom make them however you want (out of beef bone)...great sound and it fits!!!...it has now become my favourite slide : -) ( I have some videos on with me using it if you want to see how it looks and sounds)

Permalink Reply by Weemac on January 10, 2010 at 3:10am

Same problem here. My two favorites are a really cool glass slide. Nice and heavy and perfect fit:

http://www.diamondbottlenecks.com/DB08/index.asp?n=13

and a metal slide I made from a stainless steel socket after seeing John Hammond using one.

The steel slide sounds best on acoustics and the glass on electrics in my opinion.

Permalink Reply by Dianne Woods on January 10, 2010 at 5:34am

Welcome Louise the Women's Group. I am glad you joined this site. It is a great place, and great Ladies.
If you need advice, there are plenty here that will help you in any way. Many times, they have helped me.
Take a photo of your new CBG. We would like to see it. Have fun. Pretty jewelry.

Permalink Reply by Mama Mojo on June 15, 2010 at 11:20am

Yes, Welcome Louise! I also have the same problem with slides and I've got the Dunlop that Skeesix recommended and it works great. I also picked up some smaller and shorter brass pipes/fittings that work really well and you can find them small enough to fit your pinky. My local hardware store carries the small ones and it's quite possible that they can also be found at Lowes and Home Depot (but I try to go with the local folks whenever possible). Hope you find something suitable, or you could pack the larger ones with some cotton or tissue to get a snug fit in the meantime.... Again, welcome tot he group!

Best,
Lana

Permalink Reply by Penny Nelson on June 12, 2011 at 11:16am

The slide I got was too large so got some self adhesive velcro.... used the softer side on the inside of the slide it works for me.. those crystal slides look great though..

 

Permalink Reply by Brooke on August 10, 2011 at 1:21am

I use the steel sockets as well, they fit me fine. I will have to show Nox the link about the custom ones, he needs a long one.

Permalink Reply by PEGGY TRAMBLE on November 20, 2011 at 10:45am

Hi

   I had the same problem for awhile but what I did was glue a piece of felt inside the slide so that it would fit my finger.  Since then, I was lucky enough to find a ceramic slide to fit perfectly.  Hope this helps