Replies to This Discussion

Permalink Reply by John Sawyer on April 28, 2015 at 11:59am

Sounds like an awesome idea to me!

• ▶ Reply

Permalink Reply by The Phrygian Kid on April 28, 2015 at 1:45pm

it depends entirely on how rigid it is.  A guitar bridge ought be lightweight and inflexible.  If it is able to move independently then it is able to waste a percentage of the energy which your strings drive into it.  I think it ought be up to the job.

A bunch of guys have done bullet bridges around here, you're a bloodthirsty bunch.

• ▶ Reply

Permalink Reply by Keith on April 28, 2015 at 1:54pm

No no the Lone Ranger only shoots to disarm!

• ▶ Reply

Permalink Reply by Keith on April 28, 2015 at 5:01pm

Lol points for taking a Lone Ranger discussion and working in the Star Wars reference! Nice work

• ▶ Reply

Permalink Reply by RTZGUITARS on May 1, 2015 at 11:50am

When you make theme guitar you sometimes have to sacrifice tone. A bullet isn't the best bridge put they are cool.

• ▶ Reply

Permalink Reply by Kugel Sicher on May 2, 2015 at 5:07pm

You can press fit a piece of hard maple dowel inside the cartridge case. That will be light enough and be a good transmitter of the vibrations to the box. :-)

• ▶ Reply

Permalink Reply by Tom T on May 3, 2015 at 1:53am

If you are worried about energy transfer from a hollow casing, then fill it with epoxy so that it is solid. On the other hand, I would just try it first. It will probably work fine.

• ▶ Reply

Permalink Reply by Tom T on May 3, 2015 at 1:55am

If you are really in to it, you could split the bullet length wise so it sits flat on the lunch box. Fill it with lead or epoxy and it should be as solid as any other type of bridge.

• ▶ Reply