Hullo Folks. I have a small question regarding a rod piezo bridge/saddle that I intend to make.I noticed that Chickenbone John when he makes his, it is a small shaped block of solid wood with the piezo rod embedded inside with a bone saddle on top and another builder makes what is basically a wooden surround for the piezo with a saddle on top of the rod with the rod effectively sitting on top of the sound board.Does it matter if the rod is actually resting on the sound board, is it better if it is encompassed in a solid block,ala Chickenbone John style or does it make no difference at all?...

Views: 1513

Reply to This

Replies to This Discussion

Either method works very well. It's basically up to you. The most important factor is that the rod piezo be under pressure. After that, it's strictly personal choice.

What I do is ( I'll try and get a pic):

I start with a large piece of wood at  the height I want, usually about 1.5" wide and 1/2" high, then glue contrasting wood to either side - I route out the slot for the rod, then cut that strip off, route the next one, cut that off, etc. - it's easier with a large piece.

I route it deep enough to accommodate the rod piezo and still hold some sort of rod on top, either a nail or thick wire, bone whatever. Don't know if this will work for you - it's just my way.

Main thing is to give the rod peizo a good level seat so that the vibrations from the top, from the strings thru the bridge transfer to the peizo.

Love the mass production tip here.  I am so going to use this.

Jawbone, it would be awesome to see a picture (or several showing details).  Thanks for the great idea!

I'll check to see what I have at the shop in the morning and get a pic .

Thanks very much for the replies,guys.There's a lot of helpful people on here....

OK - finally got a pic - this is just a mock up but....
I glue up a block like this, the middle piece would be just a little longer than what your rod will be.
Then the other pieces are to your taste for size, they add interest and strength.
On a router table I route the slot for the rod at what ever depth I want for the rod plus bridge material.
Then I cut that piece off - plus I drill an 1/8" hole at one end for the wire.
and then repeat the routing process and then cut that off until the piece gets so small that my fingers get nervous.  I would probably get six bridges out of this piece.

Excellent!  Let me ask this - - in lieu of using a router after gluing up the stack, could a suitable groove be cut (actually a series of suitable width grooves for a 'production' effort like this) the full length of the middle piece, then the end pieces glued on?  I guess it would mean square corner in the slot, but might give your fingers less stress!  Just a thought - - I like this concept a lot!

GW

Hey Gary - I did try that method the first time and it turned out, for me, to be a lot more screwing around.

Nope doesn`t matter...as long as the slot in the wood base is the same width as the rod [ so it doesn`t rock ] and the saddle sets flat on the rod.

Mojobone Works Custom bridges

Mojobone Works - Custom Rod Bridge`s

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

BrianQ. commented on Dar Stellabotta's video
3 hours ago
BrianQ. liked Dar Stellabotta's video
3 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Project Punch!

" Thank ya again Keith!"
5 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Punch Project!

" Thank Ya Keith!"
6 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
7 hours ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
7 hours ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
9 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
9 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
10 hours ago
A.D.EKER commented on Ricky D's photo
10 hours ago
A.D.EKER commented on A.D.EKER's video
10 hours ago
Keith Rearick liked Doug Thorsvik's video
13 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->