Replies to This Discussion

Permalink Reply by Randy S. Bretz on February 8, 2013 at 3:03pm

Gitty carries my Mojobone Works custom slides.

• ▶ Reply

Permalink Reply by Tom Drommond on February 8, 2013 at 10:22pm

Those are good looking!!

With this one, I can play chords and slide.  It's thin walled, so I can still bend my first knuckle.  I'm getting used to the weight and not banging it on the neck, flailing around with it. It's easier to control than the socket was. I can use it on my strat, too. Sockets don't work there.  I have a 5/8 socket ring finger, so the standard socket only covers 2 and a half strings on everything I've built so far.  I had gone back to a full sized slide and barre chords. This has been fun to noodle with. The more slide I play on my CBG, the more I try out on my strat or lester. This is a lot easier on them.

Not selling or promoting, just thought it was worth sharing.  The inventor doesn't seem to have even thought about cigarbox players.

• ▶ Reply

Permalink Reply by Randy S. Bretz on February 9, 2013 at 7:58am

With my slides your finger extends out the front too, plus you get the added wood top to use for a wamer sound. My slides come with a spectraply top or exotic wood top. C.B.Gitty carries a complete line of my Mojobone Works slides and soon will be carrying my custom rod piezo bridges. For the real delta sound a true bone slide is the way to go. I make each one of my slides one at a time all by hand, the final finish is as smooth as glass. To hear some of my customers using their mojobone works slides check on youtube, just type in mojobone works.

• ▶ Reply

Permalink Reply by the anonymous pick on February 9, 2013 at 5:54am

cool   ..    whats  the  price  ?

• ▶ Reply

Permalink Reply by Ron "Oily" Sprague on February 9, 2013 at 6:19am

Went to the website ( www.thimbleslide.com ) ; pricing normally USD 30 plus tax, special price USD 20 plus tax. Only medium and small sizes currently available, due to amnUfacturing problems with large and XL sizes. all brass, fleur-de-lis design currently only one available, but a new design coming soon. Or so sayeth their website.

• ▶ Reply

Permalink Reply by Tom Drommond on February 9, 2013 at 6:30am

The medium "Stretch" version is what I got and it's just right for a CBG. One inch wide fits a 1 1/2" neck like a charm.  Have a look at what he does to make these and you'll figure out, he ain't making any money at $20 a throw.  He'll need chinese child labor to turn a profit.  He's using the lost wax investment casting method and hand finishing all of them at his dining room table with a dremel. That's his mfg. problem.  He only has one mold built, so far and there's only 24 hours in a day.

I say git while the gittin's good.  He'll either take them off-shore or tank.

• ▶ Reply

Permalink Reply by The Phrygian Kid on February 9, 2013 at 1:09pm

Hmm.. Or you can just hit your existing slide on a sander or grinder like we've all already been doing....

• ▶ Reply

Permalink Reply by Kevin Sprague (Knotlenny) on February 10, 2013 at 12:53am

Cool idea!

The only thing better I guess would be a fully articulated metal hand.

• ▶ Reply

Permalink Reply by Ron "Oily" Sprague on February 10, 2013 at 6:58am

One Ring to rule them all,
And in the darkness bind them...

• ▶ Reply