So i had this cigar box guitar that had a slightly warped neck so i decided to turn it into a lap steel.  I also decided to add a hand wound magnetic pickup (as well as the piezo)  Someone suggested a stereo jack and cord so that each pickup could be run through separate effects.  Not having that stuff on hand, I decided to go with two separate jacks.  I started out with wiring that looked like this.  But I wanted to be able to run both through the same jack if I wanted to, so I added a switch

The idea being that they could still be run through separate jacks, or with the flip of a switch both through one jack.  

However, now the volume controls work in tandem.  One won't work unless the other is turned up a little bit.  Everything is working all goofy now, whereas individually they both worked fine.  Any ideas on how to make this work? I know it's kind of a ridiculous idea to begin with, but now that I've got it started i want to figure out why it won't work and learn how to make it work. 

Views: 2314

Reply to This

Replies to This Discussion

Hey matt havent seen you aroun these parts for quite a while Remove the ground from the volume control for the pizzo and it'll work fine.
You could replace one of the jacks with a switching jack, so the switch you put there is automatic, sets itself by virtue Of the presence or absence of the second cable, I did this on a double neck couple years ago. Pickup looks great, nice job.

That's a great idea (about the switching jacks) but I already drilled for and installed a switch. 

What do you mean remove the ground? Do you mean go directly to the tab instead of grounding to the pot? 

Just lift the ground off that pot. Solder the black from the pizzo directly to the jack, thereby using the pot as a variable resistor rather than as a voltage divider. (you can still leave it onThe pot chassis, this shield the pot, just clip it from the third tab on the pot..

What's happening is this.. When you have one of the pots on zero the other pup is encountering almost zero resistance in following that path to ground.

Another solution woul be to use a pair if diodes (one for each circuit)..

Ps plenty other uses for that hole you already drilled a tone control for the mag springs to mind ;)

Thanks! I'll give that a try.

I believe this solves my wiring problem. I guess "when in doubt, ground it out" doesn't apply.
*if I was doing this circuit FYI id use a balance pot in one of the holes and a ganged pot for a master volume in the other. It might seem more complex, but in the playing it will make more sense. A balance pot ensures at least one of the pups is on 'ten' or up full. The ganged master volume act as for both outputs one the one knob...

Oh man this thread is EXACTLY what I have been needing to find! Also Hey, new to the forum. I have a similar idea for blending a piezo and magnetic pickup but only going to a mono output jack. Can I do that with just the balance pot? If I wire the piezo up to the jack as described above? My Idea is to blend a magnetic pup and a piezo for my acoustics and just keeping the pots tucked away in the body of my guitar and have the sound guy adjust the volume or use a volume pedal. Anyway great thread super exciting!

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

Doug Thorsvik posted a video

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

Cigar Box Guitar Slingers - Spokane, 195th Zoom Mtg 03/25/24. Only 1-finger chords, free songbooks here: https://www.cbgslinger.com/download CBG SOF Songbook...
10 minutes ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you Poorness ! for loving it ! appreciated!"
16 hours ago
Southern Ray replied to Timothy Hunter's discussion just came accross this pickup idea on youtube.
" Very interesting. Thank you Timothy!"
16 hours ago
Kent Thurston updated their profile
17 hours ago
Southern Ray posted a photo

Punch Project!

She now sports gold metal CBGitty knobs, speaker and an Artec 2.5 watt speaker. Finished this in…
18 hours ago
Southern Ray posted a photo

Project Punch!

Gonna finally get back on this long-delayed project that is more than half complete. (The matching…
18 hours ago
Poorness Studios liked A.D.EKER's video
20 hours ago
BrianQ. left a comment for Rob (Uker) Porras
"Hope this helps?"
20 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"I appreciate the kind words Papa D! I have always loved the look of these cigar boxes. Glad to have…"
23 hours ago
A.D.EKER commented on A.D.EKER's video
yesterday
A.D.EKER posted a video

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

The recorded History By Alan Lomax for the library of Congres of the Blues, from Mc Kinley Morganfield (Aka Muddy Waters) the in this take recorded Tribute ...
yesterday
Papa D commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"Beautiful..Nice work Doug.."
yesterday

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->