Replies to This Discussion

Permalink Reply by Dave Onastik on March 14, 2012 at 6:49pm

I was planning on using the same approach with a removable back, similar to my guitars.  How do you install the soundpost and get it to stay in place?

Permalink Reply by Diane in Chicago on March 15, 2012 at 1:27am

I cut it to fit really really tight, and then held it in place with a drop of crazy glue on the underside of the lid.  You have to be really sure where the bridge is going to go, and the soundpost goes just tail-wards of the treble foot of the bridge.  You can't fit it after assembly like on a standard fiddle, because the top and back are not arched, so you have to go the non-standard, luthier-cringing, way.

Permalink Reply by Dave Onastik on May 21, 2012 at 6:23am

Another question Diane...  How precise did you have to be when determining the height of neck where it enters the box with respect to the top of the instrument.  I'm thinking in terms of the bridge, which is sitting on top of a flat surface instead of the rounded surface of a typical fiddle.  The curvature adds at least 1/4 inch to the thickness of the instrument, so does that mean the bottom edge of the fingerboard above the top of the fiddle has to be approx 1/4 inch less than normal?  Or, do you allow yourself the freedom of adjusting the bridge height?

Permalink Reply by Diane in Chicago on May 21, 2012 at 9:49am

Dave, on that instrument there is very little clearance between fingerboard and top at that neck join. On a standard fiddle is it not quite 1/4".  I was able to use a fairly standard bridge, but I got a "tall" one so I had plenty of carving room to get the size I needed. So yes, I was able to compensate for the lack of belly height by lowering the neck relative to the body.

This was a while ago and my recall about these sorts of things gets fuzzy pretty quickly.

Permalink Reply by Elmar Zeilhofer on May 21, 2012 at 10:07am

Great building pics Diane! The hint with 8° inclination is super, it helped me a lot for my first violins. I didn't use the dowel, instead I reinforced the sides lengthwise (I used wooden rulers from beech). The back (1/5") itself seems to fulfill the same function as the dowel.

I'm happy this group exists, thanks for all the interesting hints.

• ‹ Previous
• 1
• 2
• Next ›
• Page