Mister Scott
  • Chicago, IL
  • United States
Share

Mister Scott's Friends

  • joseph hosak
  • mike helm
  • Heidi Harris
  • Neil Ritter
  • Robert Bear
  • Mark Bliss
  • KK Dirty Money
  • Roadkill a.k.a. John Maw
  • Kimmer Olesak
  • Michael R Cossey
  • Paul Stephen Eklund
  • Johnny Debit
  • Salty Sea Empire
  • li'l Stogie Amps & Guitars
  • Mungo Park

Mister Scott's Discussions

Grounding a jack plate?

Started this discussion. Last reply by Mister Scott Oct 4, 2011. 10 Replies

I just bought my first real practice amp -- a 25 watt Washburn. I plugged in my latest build (which has 2 humbuckers and a Tele control plate) and it sounds great, but when I flick the amp's…Continue

Lacquer Over Tung Oil

Started this discussion. Last reply by Wes "I'm Baaaaack" Yates Jun 30, 2011. 4 Replies

Is there any practical advantages from putting a clear coat of lacquer over layers of tung oil? Of course, I mean a tung oil finish, like Hornby's.

Routing a Neck Pocket

Started this discussion. Last reply by Mister Scott Jun 18, 2011. 15 Replies

I joined up with the city park district because they offer a program called "Open Woodshop: 18 and Over." I signed up for it, thinking I could really enhance some of my builds by getting access to…Continue

Rod Piezo + Disc Piezo on one circuit

Started this discussion. Last reply by wes carl May 20, 2011. 5 Replies

I want to wire a circuit for a guitar that uses a switch to toggle between a rod piezo (under the saddle) and a disk piezo (inside the box under the bridge). Since the two will be so close, and I…Continue

 

Welcome to t̶h̶e̶ ̶T̶h̶u̶n̶d̶e̶r̶d̶o̶m̶e̶ my place.

Mister Scott's Photos

  • Add Photos
  • View All

Comment Wall (23 comments)

You need to be a member of Cigar Box Nation to add comments!

Join Cigar Box Nation

At 2:23pm on January 23, 2012, petey twofinger said…
hello sir , i noticed your message about leaving chicago . i am in downers grove and need supplies . you can get a hold of me here or at my email where i could give you a phone # if necessary . p e t e y t w o f i n g e r at yahoo dot com . i have transportation , willing to come whenever . please let me know , thanks , pete .
At 10:58pm on June 2, 2011, Diane in Chicago said…
Hey, thanks!  It plays really well, too - a bonus!
At 1:42pm on April 7, 2011, Gary Simkins said…

Scotty,

Your Pearl Caddy looks great, but you are right. I am more into playing than building. What I am really looking for is a more traditional looking CB Bass made from a wooden CB with natural wood finish. I want it fretless and I think 4 strings. I am just starting to research this but am finding it difficult to find someone who is  currently building and selling this type of instrument. I can find many CBG makers but it seems basses are more rare. Maybe there is a higher degree of difficulty because of the higher string tension.   

At 1:19pm on April 7, 2011, Gary Simkins said…

Hi Scotty,

Thanks for the comment. I have considered making one myself but I am just not quite sure of how to make sure that everything is going to end up right. I have heard that it takes several builds to make enough mistakes to get to a good one. What is your take on this.

At 10:50pm on March 25, 2011, Shelley said…

Hi Scotty!

Thanks for stopping by. F-hole secrets? Well, i cut them with this: http://www.madshrimps.be/files/images/howto/Budget_Shark_Cu-jmke-384.jpg

And i took it slow and easy and tried not to cuss too much!

At 9:11am on March 17, 2011, Diane in Chicago said…

Scotty, don't know if I'll ever go for the router.  I use that $6 scraper tool from Stanley for shaping the back of the neck and that plus sandpaper is about it.  But I do have a mind to look into spoke shaves and like that.

 

But I'll be looking to see yours done with a router at our next gathering!

At 6:13pm on March 11, 2011, Roadkill a.k.a. John Maw said…

Hi Scotty.

Thanks for the nice comments. I do angle the neck but I don't know what the angle is.If I give you the relevant dimensions I think it will make sense. Where the neck meets the box the neck is also level with the top of the box. The fretboard is higher and is 6mm thick. The frets are medium so I think they are about 1mm high so that makes the frets about 7mm above the top surface of the box. If I site along the neck from the nut towards the box the top of the fretboard is almost level with the top of the box, so that means that they neck is angled back by about 6mm from where it comes out of the box to where the nut is. I hope this makes sense. The height of the strings above the fretboard at the nut it just under 2mm and the height at the 12th fret is just under 4.5mm between the string and the fretboard (so just under 3.5mm from string to top of the 12 fret). The string height at the bridge is about 14mm.

Sorry but that's a lot of numbers and I hope they are helpful. I am pretty much a novice builder and only just starting to learn to play the thing. Having said that I seem to be finding this one quite easy to play so maybe the action is about right. I suppose time will tell. Good luck with the making.

All the best.

John

At 1:57am on February 5, 2011, Skeesix said…
Yes, I have a very nice amp - Fender late 60's silverface tube amp.
At 4:51pm on January 5, 2011, Robert Bear said…
Thanks.  Appreciate it.
At 2:37pm on January 5, 2011, Robert Bear said…
All my squares are 9.75" wide by 16.75" long.  I go about it different than most.I use three pieces of lumber... Two that are 1/4" thick and one that is anywhere from 1.5 to 2 inches thick.  The thick one gets cut so that it forms the sides, neck pocket and base... then I essentially sandwich that in between the two 1/4 inch slabs.  Fairly easy process.

Profile Information

How did you learn about Cigar Box Nation?
online
 
 
 

The Essential Pages

New to Cigar Box Nation?How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

 

Recommended Links & Resources

Forum

Fret press anyone?

Started by Ducati Scotty in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans 1 hour ago. 8 Replies

PDF Download: Build a "Two Hour" Hammered Dulcimer

Started by Shane Speal shanespeal.com in Feature Articles. Last reply by Shane Speal shanespeal.com 6 hours ago. 2 Replies

VIDEO - Building Guitars with Antique Cigar Boxes

Started by Shane Speal shanespeal.com in Feature Articles. Last reply by Lonman 22 hours ago. 6 Replies

VIDEO & PICS: Reso Bass by Jason Mills of Highwood Guitars

Started by Shane Speal shanespeal.com in Feature Articles. Last reply by Paul Craig yesterday. 20 Replies

PDF Download: Build a Super Tub Bass (improved upright gutbucket bass)

Started by Shane Speal shanespeal.com in Feature Articles. Last reply by James Matthews on Saturday. 3 Replies

Fret board Length

Started by Tim Castagnola in Building Secrets, Tips, Advice, Discussion. Last reply by Paul Craig on Saturday. 19 Replies

Latest Activity

Uncle John commented on Andries D. EKER's video
Thumbnail

Come on Down to Calli Fest BCB One man Band 2019

"I like that echoing sound.   Good one, A.D.  I don't know what Richard has…"
1 hour ago
Taffy Evans replied to Ducati Scotty's discussion Fret press anyone?
"Hi Jerry, If I may offer a bit of advice re tapping frets in, keep the word "tapping" in…"
1 hour ago
Uncle John commented on BUGGY (C)'s video
Thumbnail

The fun is over !

"Ominous and spacy too.  Well done, but skeery.  A pupped dog bit me when I was a…"
1 hour ago
Uncle John commented on Uncle John's video
Thumbnail

Cali Fest ~ Hank Williams Open Mic sign up

"Doc Blues, I know the song you are talking about.  Got you on the list. Thanks! Thanks brother…"
1 hour ago
Korrigan commented on Korrigan's video
Thumbnail

Build #28, Isadora

"Thanks Jason!"
1 hour ago
Paul Craig liked Mike Willmouth's video
2 hours ago
Paul Craig commented on BeetleJuice!'s blog post Fender Plans a USA made Acoustic
"I saw a video on this guitar being demo'd by a guitarist. It sounds very good as a Acoustic…"
2 hours ago
Denny liked Jérôme B's video
2 hours ago
BrianQ. commented on BUGGY (C)'s video
2 hours ago
gordon barnes posted a blog post

pentatonic scale fret board or neck

Anybody know where I can buy a pentatonic scale fret board or fretted neck?See More
2 hours ago
BrianQ. liked BUGGY (C)'s video
2 hours ago
BrianQ. liked Uncle John's video
3 hours ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://api.ning.com/files/Stym6V-ACBaiDP5ilIPA6bJ3rn0ZdlI1EwGHWgROvEkwiCCaNgzJRcZTZH8OGkV3fvK-NboXjThXltWFbcihM-jI4Mwz5SV3/scrollup_icon.png") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->