Howdy Andy; I have a couple of projects in my head, none right now in the physical works; as usual, the holidays have sneaked up like a mugger from a dark alley, so fun-project time exponentially drops day by day. I have an issue with my
eyebolt tuners, and would love to spend on "normal" tuners if I could get them to wrap these massive weedwackers. I'm thinking about an open head (like your duo-dulce), and maybe "patching on" a thru-rod to standard tuners to replicate
the way-too-expensive standard Bass (3/4, 4/4) tuners. Hence my query- I thought I saw rods extending through the cutout on your fine work.
Other "mind" projects: a wood bowl resonator baritone Uke (or maybe just tuned/rigged like a standard CB guitar), and a CB short scale 3-string Bass; but on this latter, I'm thinking about a body a bit bigger than a standard CB- I want to fret it up and use an old Danelectro lipstick pickup I scored; I'm thinking I'd like a bit more resonance room than a standard
CG would provide. Any thoughts? Thanks, Brian
Hey Andy I just use a compass to draw the center ring and drill right on the line and then I usually eyeball the rest.
I never really make a pattern I just kinda do whatever feels right.
Hey Andy, I almost used my fret saw to cut those "fret" inlay slots, but also thought they'd be too thin. So I went with a typical wood saw I had lying around... Not sure how wide it was, well... it's as wide as the inlays, right? :-) Needless to say, it was probably 3 times wider than the fret saw would have been.
Then I took a scrap piece of walnut from my previous CBG and began sanding... lemme tell you, it was tedious getting the wood that thin. Just sanded sanded sanded, tried to put the wood in the slot, and sanded some more until it fit. I did the entire neck once... then tried to cut and/or sand the pieces sticking out, and because the walnut strips were so thin, a few of them broke. I eventually had to do three days worth of sanding strips, glueing them & sanding them flat before I had 'em all in.
I would have loved to be able to use some stock slices of wood that matched a saw I had perfectly, but ya do what ya can with what you have, right? Keep on doing what you do Andy, you do it very well!
That's basically how I did mine to, minus the files, but that was before I bought the cutting kit attachment. Which attachment are you using? I wondered if the multisaw attachment would work better, but haven't used either yet.
Hi mate - Im pleased you can make use of the headstock idea. It only took like 5 mins with a round file - if you dont have one get a coarse one. Should only be a few bucks. And post some pics when you're done!
Take it easy
B
At 5:48pm on September 15, 2009, Braxton Nagle said…
So sorry in not thanking you earlier for your comment. I have dial-up so i actually don't go on the internet that often & i'm not always great about replying in general.
Anyway thanks again!
Rock on,
Braxton
Hey i love that bari uke.
I just scored a gran puro box yesterday at a cigar store ;)
Thank you Andy, to you and your wife for coming to see me. I really enjoyed talking to you and hearing about your new business. I wish you all the best of luck. Seems to me with a combination like that, how can it possible fail. LOL Please stay in touch. You built a real nice baritone uke there. I know the Nation will benefit from your design skills. Enjoy.
thanks andy fer the comment on the big cuesta rey reso video.i like the sound of it acoustic and it gets better plugged in cause of the ted crocker tesla piezo under the mason jar lid plate that the biscuit rest on.
Thanks for the comments. Today is sunday - so Im going to make a GBG (as opposed CBU) So I'll see how that goes. I will check out your stuff - sounds great!
Cheers - Gus
This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
Andy Estabrooks's Comments
Comment Wall (46 comments)
You need to be a member of Cigar Box Nation to add comments!
Join Cigar Box Nation
eyebolt tuners, and would love to spend on "normal" tuners if I could get them to wrap these massive weedwackers. I'm thinking about an open head (like your duo-dulce), and maybe "patching on" a thru-rod to standard tuners to replicate
the way-too-expensive standard Bass (3/4, 4/4) tuners. Hence my query- I thought I saw rods extending through the cutout on your fine work.
Other "mind" projects: a wood bowl resonator baritone Uke (or maybe just tuned/rigged like a standard CB guitar), and a CB short scale 3-string Bass; but on this latter, I'm thinking about a body a bit bigger than a standard CB- I want to fret it up and use an old Danelectro lipstick pickup I scored; I'm thinking I'd like a bit more resonance room than a standard
CG would provide. Any thoughts? Thanks, Brian
I never really make a pattern I just kinda do whatever feels right.
Then I took a scrap piece of walnut from my previous CBG and began sanding... lemme tell you, it was tedious getting the wood that thin. Just sanded sanded sanded, tried to put the wood in the slot, and sanded some more until it fit. I did the entire neck once... then tried to cut and/or sand the pieces sticking out, and because the walnut strips were so thin, a few of them broke. I eventually had to do three days worth of sanding strips, glueing them & sanding them flat before I had 'em all in.
I would have loved to be able to use some stock slices of wood that matched a saw I had perfectly, but ya do what ya can with what you have, right? Keep on doing what you do Andy, you do it very well!
Take it easy
B
Anyway thanks again!
Rock on,
Braxton
Hey i love that bari uke.
I just scored a gran puro box yesterday at a cigar store ;)
Thanks for the comments. Today is sunday - so Im going to make a GBG (as opposed CBU) So I'll see how that goes. I will check out your stuff - sounds great!
Cheers - Gus
Welcome to
Cigar Box Nation
Sign Up
or Sign In
Or sign in with:
The Essential Pages
Site Sponsor
Recommended Links & Resources
Forum
just came accross this pickup idea on youtube.
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray yesterday. 1 Reply 2 Likes
crossover guitar.
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies 2 Likes
VIDEO: Building a CBG with limited resources.
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Free PDF Download: Vintage Guitar Effects Plans - 1967 Fuzzbox and 1969 Treble Boost
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Tune up songs
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Duel output jacks
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
No Harmonics
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Camera suggestions?
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
CBG site issues, continued.
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Busking Songs...
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray Mar 2. 6 Replies 1 Like
Anyone used a violin-style tailpiece on a CBG?
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd Mar 1. 15 Replies 0 Likes
Guitar for the grandson
Started by Joe in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Feb 29. 13 Replies 0 Likes
Building with vintage paper/pressed board cigar boxes.
Started by Chance in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Feb 22. 12 Replies 1 Like
How to Get Your Own Music on Spotify
Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies 4 Likes
Trash Canjo
Started by Brad in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Feb 19. 6 Replies 3 Likes
Do Measurements Matter?
Started by Jacob Shook in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Feb 16. 10 Replies 0 Likes
There goes the property values...
Started by Southern Ray in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray Feb 16. 2 Replies 0 Likes
Cigar Box Nation Christmas Album 2023???
Started by Skeesix in Performances, How to Play, Lessons, Concerts. Last reply by Skeesix Feb 6. 2 Replies 1 Like
Happy new year to all
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Steve M Jan 31. 9 Replies 0 Likes
CB Bass Guitar
Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies 0 Likes
Blog Posts
Everyone can make CBG. And I did it =)
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
.✨. Cover Me ..♪♫•*¨*•. ~ the Delta Blues Outlaws
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Q&A with Arkansas-based talented blues musician Billy Jones, one of the very best authentic modern artists
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Big Power Bank for Small CBG =)
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
.✨.♪♫•*¨*•. .The Love Doctor ..♪♫•*¨*•. .
Posted by billy jones bluez on February 8, 2024 at 4:05pm 0 Comments 0 Likes
Latest Activity
A Cigar Box Guitar Six Stringer Built by Louie Lamanna
Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.
A Cigar Box Guitar Six Stringer Built by Louie Lamanna
A Cigar Box Guitar Six Stringer Built by Louie Lamanna
Project Punch!
Punch Project!
AGP #527 - ''Led-Zep 2''
Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.
A Cigar Box Guitar Six Stringer Built by Louie Lamanna
Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar
Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar
FuZZy2
CigarBoxGuitar.com Knowledgebase Articles
Add a Panel-Mount Gain to a C. B. Gitty Amp Board
Cigar Box Guitar Building Tip: Neck Reinforcement with Humbuckers
A Step-by-Step Guide On How To Make a Straight Headstock
Cigar Box Ukulele Kit Assembly Guide
Advanced Cigar Box Guitar Building guide by Joshua Gayou
“Open A” AEA Tuning on your Cigar Box Guitar: 4 Methods, with String Sizes & Sound Clips
“Open E” EBE Tuning on your Cigar Box Guitar: 4 Methods, with String Sizes & Sound Clips
“Open D” DAD Tuning on your Cigar Box Guitar: 4 Methods, with String Sizes & Sound Clips
“Open G” GDG Tuning on your Cigar Box Guitar: 4 Methods, with String Sizes & Sound Clips
Diatonic (Dulcimer-Style) Fretting – What it is, How and Why to Use It
Events
Music