When I started out making pickups, I had just bought a bigger lathe and had one of those mini one that I was just going to sell.  I instead turned it into a winder.  I added a counter and made a platen to mount the bobbins to.  Has served me well but it is heavy.  So perhaps it is time to revisit the winder.

This is going to be a simple design consisting of just a DC motor, a PWM motor control (courtesy of Dan Sleep) and a counter.

Still picking out a motor but have ordered the motor controller Motor control via China on Ebay

For a counter, I like the Red Lion Cub series that is also easy to find on Ebay.  Here is a sample counter circuit diagram

Some of the parts are optional like the power indicator led and R1 or even the power switch.  The counter reset is only needed if the Cub you choose doesn't have a reset button on front but instead has two leads for reset.

I used an optical sensor QRB1114 which I think is no longer made but others are available.  I used a washer that I painted half and polished the other half so the sensor can detect and count the turns

The sensor I used was the now discontinued QRB1114 that is in the diagram.  The replacement is the OPB704 available at Digikey for a few bucks.Download the data sheet for the pin out to be able to match the circuit diagram.

Once all the parts arrive, I'll post more including some measured Cad drawings for the base and assorted parts.

PM me if you have any questions

Update:

First motor arrived.  Hooked it up and tested.  Lots of torque and good speed control at low rpm.  Motor might be a bit too slow for some but probably better for beginners.  I posted a video.

http://youtu.be/UM2eoza3Mbw

This motor is 24 volt.  I wanted to test the speed control at the upper limit.  One heat sink gets warm at idle but is fine at speed.  The next motor is 12 volt 1000 rpm.  We will see if that has as good performance as this motor and if it helps the control to run cooler when the motor is idle.  The solution if not is to install a power switch for when the machine is not winding.  The heat sink is big enough, I just like to keep everything running cool.

Next up I'll machine a mount for the motor and a platen to mount the pickup bobbin along with a base to build the winder itself.

Views: 1316

Comment

You need to be a member of Cigar Box Nation to add comments!

Join Cigar Box Nation

Comment by Don Goguen on May 4, 2013 at 12:48pm

Pretty simple Penny but mechanical counters work poorly at the kinds of speeds most wind at once they learn control and hand patterns.  I often wind at over 600 rpm.  This winder at the speed it goes at would take me forever to wind a coil.  3000 winds at 600 rpm takes only 5 minutes.  This thing might be doing 60 rpm.  Also this he is winding big inductive coils and not small gauge pickup wire.

Comment by Penny Nelson on April 3, 2013 at 4:59am

was checking out youtube for more inspiration on diy counters and coil winders and came accross this gem - like magic! nosoldering required just string and timber lol.... sure it works but my cat would have a field day with this...http://youtu.be/OYDH0ATaP7w

The Essential Pages

New to Cigar Box Nation?How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

 

Recommended Links & Resources

Forum

Weird buzzing sound

Started by Emil Palmgren in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans 9 hours ago. 6 Replies

Fret press anyone?

Started by Ducati Scotty in Building Secrets, Tips, Advice, Discussion. Last reply by Ducati Scotty 11 hours ago. 12 Replies

VIDEO & PICS: Reso Bass by Jason Mills of Highwood Guitars

Started by Shane Speal shanespeal.com in Feature Articles. Last reply by Jason Mills 20 hours ago. 21 Replies

PDF Download: How to Tie Fret Knots - a Traditional Way of Fretting

Started by Shane Speal shanespeal.com in Feature Articles. Last reply by Busyhands Slim yesterday. 1 Reply

PDF Download: Build a "Two Hour" Hammered Dulcimer

Started by Shane Speal shanespeal.com in Feature Articles. Last reply by Shane Speal shanespeal.com yesterday. 2 Replies

VIDEO - Building Guitars with Antique Cigar Boxes

Started by Shane Speal shanespeal.com in Feature Articles. Last reply by Lonman on Tuesday. 6 Replies

PDF Download: Build a Super Tub Bass (improved upright gutbucket bass)

Started by Shane Speal shanespeal.com in Feature Articles. Last reply by James Matthews on Saturday. 3 Replies

Fret board Length

Started by Tim Castagnola in Building Secrets, Tips, Advice, Discussion. Last reply by Paul Craig on Saturday. 19 Replies

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://api.ning.com/files/Stym6V-ACBaiDP5ilIPA6bJ3rn0ZdlI1EwGHWgROvEkwiCCaNgzJRcZTZH8OGkV3fvK-NboXjThXltWFbcihM-jI4Mwz5SV3/scrollup_icon.png") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->