Every year around December my family asks me to provide gift ideas. I always do, but typically they ignore most of them and I end up getting socks or dress shirts or something like that. I don't want to sound ungrateful, I always appreciate it, but this year my older sister surprised me with a Tin Pan Alley kit from CB Gitty. What a cool gift!

Note:  This article has been chosen as featured content for Cigar Box Nation.  We've added the top header image and the accompanying video to the original blog.  A big thank you to Poorness Studios for the fantastic builder's diary.

This was my first time building a guitar from a kit. I've modded many guitars in the past and fixed several broken instruments, but I'd never built one from just a stick and a box. I was a bit nervous but I figured I'd just go slow and take it one step at a time. First things first, I started putting the box together and went to work contouring the neck.

The kit was pretty darn easy to put together. Most of the wooden parts were pre-cut, but you have to cut the neck notch (both in the body and the neck) yourself. Once all the glue was dry and the braces were in place, I started thinking about how I was going to finish this kit. I decided I wanted to try to paint it black with hot rod flames. I also decided to finish the neck with a nice dark stain.

The next step was to notch the neck so the top can vibrate freely and the resonator cone doesn't hit the wood. This was probably the most difficult part of the whole build. Even though this kit is designed to be acoustic, I decided to add a Lace matchbook pickup to the instrument. I added a pot and jack and wired them up before I fitted the neck.

This is where the guitar really started to take shape. I mounted the neck and began adding the finishing touches like chrome corners and pearl tuners. At this point I realized I had no idea how I was going to paint the flames on the top so I did some research. It turns out you can do a pretty good flame job with rattle cans.

I practiced painting flames on an old shelf and discovered it's not as hard as I thought it would be. It's actually pretty simple once you get the hang of it. I covered the top in masking tape and went to work laying out a pattern. Then it was time to lay down the paint.

After 3 shades of paint, several coats of clear, and a lot of dry time... I was happy with the way the top came out and decided it was time to glue this baby together. First I had to wire up the pickup though. Once I tested all the electronics, I used a couple pieces of scrap wood and some clamps to hold everything in place while the Titebond dried.

At this point I decided to add an old railroad nail to the headstock as a decoration. It looks super cool. However, this isn't an original idea. I stole it from Ben 'Gitty' Baker. He uses this technique on his Hobo Fiddles. I also noticed the low G string rattled a bit, so I added a screw to the headstock to act as a string tree.

The kit comes with acoustic strings, but I wanted to use electric ones. I had some laying around but the gauges were a little heavier than what's supplied with the kit. After some initial trouble with the bridge, I found a spot where all the strings intonate well. It took a bit of trail and error, but I got her to tune up real nice. Yeehaw! Now I've got 2 CBGs in my musical arsenal.

Overall, I'm really impressed with this CB Gitty kit. It was a pretty intuitive build and I had a lot of fun working on it. I would recommend this kit to anyone who wants to wants to become part of the Cigar Box Revolution. Take your time, follow the instructions, and you too could have a pretty lilttle gitty just waiting to be played.

Views: 364


You need to be a member of Cigar Box Nation to add comments!

Join Cigar Box Nation

Comment by Mek on January 17, 2019 at 8:45am

Nice work - came out fantastic! Also loved the commentary. Looks awesome!

Comment by Poorness Studios on January 15, 2019 at 3:24pm

Wow. I’m featured. What an honor. I really appreciate you guys taking the time to read the article. Thanks Shane and Ben!

Comment by Shane Speal shanespeal.com on January 15, 2019 at 3:02pm

This post has been Featured by Cigar Box Nation.  I've added a header image and embedded the video in the original content.  Thank you so much, Poorness Studios for your contribution.  We will be sharing this in our next Cigar Box Nation email blast.

Comment by Ben "C. B. Gitty" Baker on January 15, 2019 at 2:32pm

Good work, glad you liked the kit. We have more great kits in the works for 2019, stay tuned!

Comment by Poorness Studios on January 13, 2019 at 7:47am

 There's also a video version here: https://cigarboxnation.com/video/my-first-cb-gitty-kit

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Ideas for supporting nuts

Started by Brent Kasl in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner 10 hours ago. 1 Reply

Piezo disc under fretboard

Started by Will "KOOL DOG HOOCH" Bonner in Other stuff - off topic, fun stuff, whatever. Last reply by Paul Craig 17 hours ago. 10 Replies

Yamaha yg15 schematic needed

Started by Will "KOOL DOG HOOCH" Bonner in Other stuff - off topic, fun stuff, whatever. Last reply by Paul Craig 18 hours ago. 27 Replies

Pan for a resonator

Started by Will "KOOL DOG HOOCH" Bonner in Other stuff - off topic, fun stuff, whatever. Last reply by Paul Craig on Friday. 8 Replies

Placing piezio rod

Started by Steve Eckel in Performances, How to Play, Lessons, Concerts. Last reply by Will "KOOL DOG HOOCH" Bonner on Thursday. 7 Replies

Single-layer boxes?

Started by Sean Murphy in Building Secrets, Tips, Advice, Discussion. Last reply by Tim Pannabecker on Thursday. 6 Replies

Trivia Quiz

Started by Tim Pannabecker in Building Secrets, Tips, Advice, Discussion. Last reply by the anonymous pick on Wednesday. 9 Replies

Equalizer preamp

Started by Will "KOOL DOG HOOCH" Bonner in Other stuff - off topic, fun stuff, whatever. Last reply by Will "KOOL DOG HOOCH" Bonner on Tuesday. 8 Replies

Decal top removal

Started by Robert Bryan in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner May 13. 3 Replies

Blog Posts

Latest build

Posted by Sean Murphy on May 8, 2019 at 9:03pm 4 Comments

Netherlands Tour

Posted by Dar Stellabotta on May 8, 2019 at 5:33pm 0 Comments

Sunday canjo fun

Posted by Sean Murphy on April 21, 2019 at 5:26pm 2 Comments

Finding Xanadu in Memphis

Posted by Poorness Studios on April 13, 2019 at 6:00pm 5 Comments

Latest Activity

Andries D. EKER commented on AGP #'s video

AGP #354 ''Major Mojo'' - Seven Nation Army - 18 May 2019

"DubbelbadAss !AGP# like adubbelneck all in one,now i know what AGP#  stands for;"…"
4 minutes ago
Randy S. Bretz posted a photo
8 minutes ago
Uncle John commented on Uncle John's video

U R My Sunshine ~ at a bit faster pace

"Ooooh.  Home made ice cream sounds good.  Remember taking turns sitting on the bucket or…"
11 minutes ago
Andries D. EKER commented on Eero Tapani Lehtinen's video

Godfather, mando and some delay

"it made me drift away ! Eero ! beautifull playing on a fine Mando  Chio !Cinzano!"
17 minutes ago
Graham Alibone liked Sean Murphy's blog post Sunday canjo fun
2 hours ago
Jerry Jordan commented on High Bird Handcrafted Instuments's photo

Réunion Kestrel - Together with the Tawny Eagle, her big brother ;)

"Beautiful .,.,.,love you build style.,.,.Santa take note.,.,"
2 hours ago
Dave Lynas commented on smilingdog1's photo

Rob Ushers Bike Guitar

"Wild Thing. Looks like Peddle to the Metal."
2 hours ago
Dave Lynas liked smilingdog1's photo
2 hours ago
Dave Lynas commented on Dave Lynas's photo

Jim Hall

"I did about a dozen drawings for the project so far. Might be 4 in the final or just one.…"
2 hours ago
Dave Lynas commented on Dave Lynas's photo

Charlie Parr

"Charlie Parr is from Duluth AGP. I love his stuff. I hope to meet him over this project."
2 hours ago
Dave Lynas commented on Dave Lynas's photo

Lee Martin

"Thanks Denbo, thanks Brian. Fun project for a great guy."
3 hours ago
High Bird Handcrafted Instuments posted photos
3 hours ago



© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->