Make your own mini-humbucker pickup from a scrapped electric toothbrush

Question: what do you do with a “wirelessly” re-charged electric toothbrush when its battery eventually dies?

Answer: salvage the tiny induction coil from inside the sealed body of the toothbrush handle. It’s ideal for making your own pickups. All it needs is a magnetic core and some patient, fine wiring work.

I glued a stack of a few 12mm diameter molybdenum magnets inside the coil’s bobbin, using a quick-setting epoxy resin. The results from a single coil pickup were so pleasing that I added a second, arranging the opposing magnetic senses and observing the required electrical polarities in order to make a mini-humbucker. I marked the magnets and the wires with red and black Sharpie pens to keep the assembly on track. The hardest part for me was stopping the fierce wee magnets from clumping together, so I used small clamps and glued them to a baseplate at two different times.

There are plenty more detailed photos in this shared Google Photos album of mine which might inspire you build your own version:

https://photos.app.goo.gl/i7Srwm8NHam78wHCA

Have fun!




Views: 96

Comment

You need to be a member of Cigar Box Nation to add comments!

Join Cigar Box Nation

Comment by Southern Ray 4 hours ago

 Great thread! I learned a lot from this one. Brain hurt.

Comment by BrianQ. yesterday

I remember it, it kinda looked like a 60’s Burns with all the plastic control plates on the face? Line 6 pretty much has that modeling guit market sewn up with their Variax guitars tho? 

Comment by the anonymous pick yesterday

The Volkswagen guitar i mean . 

Comment by the anonymous pick yesterday

Yeah . it had a good concept ,  but was  generally considered a pos . Needed some more production  tweeking me thinks .

Comment by BrianQ. yesterday

That guitar has an onboard midi interface like the iRig software?

Comment by the anonymous pick yesterday

Thanks guys , It's spring cleanup nowadays in most places ,    a good time to look out for washer and driers ,  Older models have a  end of cycle buzzer , usually located in the top right of the   control panel .  looks like a  lil jackhammer  with an axle  usually banging against a piece of metal or the side of the machine . Another  coil grab. for ya . and some have some funky knobs too.

And then we have piezos .------  musical greeting cards , microwave ovens , some older stylophones , etc etc . aRE all good PIEZO grabs .

On another note . (Amp related , not pickup related . ) In 2006 volkswagon  had a deal with first act guitars ,   You would get a free vw guitar with  purchase of the car , and the car was fitted with a guitar amp in the radio . so you could tailgate party  and just plug you guitar into the car . open the doors and jam out . 

This had folks calling auto wreck yards looking for that radio ..  but . un-benounced to many . the  amp  wont work with  just plugging a regular guitar into it .   The first act guitar had an amp modular circuit in it  that allowed  it to work  with the car radio amp.

However ,  You can still do this with any  car radio and any  guitar , If your car has a 3.5mm input jack, you can get a preamp or headphone amp, and plugthe guitar into it, and the preamp into the car.  presto !  The reason you can't just plug the guitar into the car is that the stereo is looking for a line level signal, of between 1 and 1.6 volts while the guitar puts out about a third of that.

still may have volume issues tho . 

ok .   babble over . 

peace out. 

Comment by BrianQ. yesterday

Ray, best to use wall warts rated higher than 9 volts, the higher resistance will give a louder pickup?

Comment by Southern Ray yesterday

Thanks to Pick for the list. I knew of most of them, but not all. One thing to add, though. If the wall-wart doesn't have some heft to it, it likely doesn't have enough wire to do anything with.

Comment by Southern Ray yesterday

Thank you Peter! Oh goody! I have another thing to tear apart! 

 

Comment by Peter Bryenton on Sunday

Info for BrianQ:

The DC resistance of the pickup measured at the guitar's output jack socket is 7.3K ohms.

The output level works very well with my Crate GT212 amp at between 3 and 4 on its gain knob. Subjectively it's loud to my ears.

Cheers, Peter.

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Forum

String query

Started by Michael Myers in Building Secrets, Tips, Advice, Discussion. Last reply by Michael Myers Apr 6. 3 Replies

CallyFest 4

Started by Richard Sundberg in Fests and Concerts: Organizing and Promoting. Last reply by Southern Ray Mar 19. 46 Replies

Latest Activity

Dave Lynas liked Scotty Bolton's video
30 minutes ago
Dave Lynas liked the anonymous pick's video
35 minutes ago
Dave Lynas liked Anthony Insetta's video
40 minutes ago
Dave Lynas commented on Anthony Insetta's video
Thumbnail

A Lil Diddy

"Wonderful Anthony. Slickerish, quickerish, magic."
40 minutes ago
Dave Lynas liked A.D.EKER's video
46 minutes ago
A.D.EKER commented on AGP #'s video
Thumbnail

AGP #424 Modified “Balikpapan Chugger” Sound Sample Medley

"There is a distinct  diverens ! Oyea less feedback and more sustaine ,and all because you put…"
55 minutes ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Home Groove BCB One Man band 2021

"On the prawl ! dont you have the feeling that you are there when you watch the video? somehow it…"
1 hour ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Home Groove BCB One Man band 2021

"hayá AGP# ! thanks for the like ! Appriciated !"
1 hour ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Home Groove BCB One Man band 2021

"thanks Keith ! appriciated !"
1 hour ago
BrianQ. replied to Paul Craig's discussion What's on your workbench?
"Speaking of “on the bench” I got these old pedals on the bench for true bypass &…"
3 hours ago
Southern Ray liked T-Gripped's photo
3 hours ago
Southern Ray commented on Peter Bryenton's blog post Make your own mini-humbucker pickup from a scrapped electric toothbrush
" Great thread! I learned a lot from this one. Brain hurt."
4 hours ago

Music

© 2021   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->