three (1)

The Bellybus

Hi peeps,

                Thought you might be interested in having a butchers at my 'tour bus'-I didnt want to clog up the nation with pics of a motor so I've placed them here.You can follow developments as the work on her continues throughout Spring 2011.

            Its a 2003 VW T4-they are used as surf buses around these parts and campervans too.It has only 45k on its 2.5 turbodiesel engine and believe me I was lucky to get it-they are like gold dust, especially in this condition.Being a family man, the Bellybus will be dual purpose-a rock roll seat/bed will be installed in the rear so the kids can travel when the old rusty Rover car eventually falls to pieces.

Pic 1-heres the Bellybus as was when bought-a regular panel van..

9353727694?profile=original

and heres a pic with the side windows installed-I had them limo tinted so peeps cant see any gear I might be carrying in the back-

9353728266?profile=originalOn this third pic you can see the other side window also.With the tailgate open you can see I've not done anything to the inside yet-the wood panels and blue carpet were the previous owners work.I've just cheered it up a bit for now by sticking a few set lists from recent gigs up and chucking a few cushions in to sit on..I carry a sleeping bag under the drivers seat just in case..so far the Bellybus has taken me to gigs in Birmingham,Kent,London and across the sea to Belgium-at the wheel it feels like a family car-nice n smooth and not noisy at all..it drives with all the efficiency one would expect from a German vehicle..dubtastic ;o)  

9353728693?profile=original

So what next? well I need to remove the wood panels and insulate, remove the carpet (come on- carpet just aint rock n roll!) I'd like to have it wood everywhere,with gig posters and the like-kinda like a Bluesmans' wood cabin on wheels! I toyed with the idea of having a pic of Eric Clapton on the floor..heh heh..wipe your converse here.Anyway, this next pic is from some dudes T4 I found on the interweb-he's removed the ceiling panels and put wood in- like I want it-the ceiling is very cool but the rest of its a bit 'neat' for my taste-plus is that carpet I see on the walls..Noooo! still, you get the idea..well, seeing as I'm pants at woodwork I reckon Juju will be getting a call!

9353729061?profile=original

 Well thats it for now peeps-I'll update as the Bellybus develops over the coming months.Cheers, HB

9353730274?profile=original

UPDATE-MARCH-

             Well I've been busy stripping out the Bellybus and adding insulation to make it more comfortable when I ever need to kip in the bus-unfortunately my dream of having Juju fit out the inside is not to be as he is inundated with guitar orders and has a kitchen to build, so its down to yours truly.I am taking my inspiration for the interior from the cover of my album and am using hessian to carpet the walls-its cheap too-I'll be going for a mild rat type look (and believe me, with my woodworking skills its just as well!)  hessian/distressed gig posters on walls etc..

              Anyway,heres a few pics-this really is the boring bit..insulating/cutting panels and so on..rear wheel arch is covered in flashing tape to quieten road noise..

9353730480?profile=originalmore insulation in the roof space-silver backed bubblewrap-

9353731663?profile=originalI've made doorcards and panels from 3.6mm ply-heres the doorcard for the rear tailgate sitting in me garage-as you can see I got my mate Bansky to decorate it  lol   

9353731275?profile=originalbit more exciting/fun than the generic grey one anyroad.

Ok dudes-more updates soon..

UPDATE APRIL-

         Ok peeps the rear seat is in,and I've got all the hessian where I want it-begun to stick up posters and stuff-heres a few pics-

9353732074?profile=originalThis heres a close up of the 'mojo hole'-a take on honesty windows from strawbale eco houses if you will-I put in a used (knackered) bluesharp, a glass slide and a used plectrum.9353732473?profile=originalI really like the roof cos it cost me nowt-I just reversed the original panels! It added no extra weight-I was gonna put in thin tongue and groove but it weighed  a considerable amount and you'd pay for that at the pumps, so I decided against it-plus these hardboard panels give that ratty shed look I wanted.9353732653?profile=originalseat down into the bed position-king size-nice!9353733101?profile=originalgotta dash peeps-more pics later..

UPDATE MAY-

floor getting installed today-it might look fancy but its just 12mm outdoor grade ply and I varnished it 3 times-might not last  years n years but of course I have the option to lay a harder wearing floor on top at a later date if I feel the need.I've put 2mm of neoprene rubber strip all around the edges to cut down on the possibility of squeaks where wood meets wood or metal-what with the bus moving and all that.Left a little space in case of expansion due to heat also.It fits nice, but dont zoom on this photo or you'll see how bloody awful my woodworking 'skills' are!!

9353732883?profile=originalok you zoomed didnt you?! DIDNT YOU?!!!

right next,so heres the riser that goes under the rear seat and houses the rear 6x9 speakers-I found a tea chest on the local dump-as you know, they have stencils sprayed on from being shipped all over the world and I thought I'd take it apart and make panels out of them.All the stencils are genuine apart from the Hollowbelly one which I added then sanded slightly to match it with the others..

9353733460?profile=originalso here it is in situ just to give you an idea-I've installed the floor and the riser is just sitting there unglued for now-seems prudent to ensure the speakers work before I stick the panel in.. I sprayed the speakers covers matt brown as they were brand new, then knocked em back a bit with sandpaper-the 2 rusty metal bands in the centre of the panel are those metal strips that hold the tea chest together.I used them to hide the join between the different panels, as well as add a bit more grunge..

9353733298?profile=originalthe opposite wall panel now looks pretty boring so Im on the lookout for a few more tea chests-alternatively I may leave it so I have more space for future gig posters as and when they arrive..

ok thats it for now peeps-I'll get back when I next do something else-the step probably..

      July/August-ok so heres the step and riser going in-I used the offcuts from the free tea chests for the riser and also the rusty metal strips from the tea chest edges to match the pattern under the rear seat.The actual step is the same 12mm marine grade ply..oh and I used the 'Hollowbelly Punkblues' stencil I used on the cd flightcase-just sprayed it with black car spray,then white over the top..and Bobs yer uncle as we say in the north.

9353735258?profile=original9353735476?profile=original

the lights are coming on nice...

9353735501?profile=original

Read more…