Make your own mini-humbucker pickup from a scrapped electric toothbrush

Question: what do you do with a “wirelessly” re-charged electric toothbrush when its battery eventually dies?

Answer: salvage the tiny induction coil from inside the sealed body of the toothbrush handle. It’s ideal for making your own pickups. All it needs is a magnetic core and some patient, fine wiring work.

I glued a stack of a few 12mm diameter molybdenum magnets inside the coil’s bobbin, using a quick-setting epoxy resin. The results from a single coil pickup were so pleasing that I added a second, arranging the opposing magnetic senses and observing the required electrical polarities in order to make a mini-humbucker. I marked the magnets and the wires with red and black Sharpie pens to keep the assembly on track. The hardest part for me was stopping the fierce wee magnets from clumping together, so I used small clamps and glued them to a baseplate at two different times.

There are plenty more detailed photos in this shared Google Photos album of mine which might inspire you build your own version:

https://photos.app.goo.gl/i7Srwm8NHam78wHCA

Have fun!




Views: 182

Comment

You need to be a member of Cigar Box Nation to add comments!

Join Cigar Box Nation

Comment by Southern Ray on April 15, 2021 at 2:21am

 Great thread! I learned a lot from this one. Brain hurt.

Comment by BrianQ. on April 13, 2021 at 6:41pm

I remember it, it kinda looked like a 60’s Burns with all the plastic control plates on the face? Line 6 pretty much has that modeling guit market sewn up with their Variax guitars tho? 

Comment by the anonymous pick on April 13, 2021 at 6:28pm

The Volkswagen guitar i mean . 

Comment by the anonymous pick on April 13, 2021 at 6:26pm

Yeah . it had a good concept ,  but was  generally considered a pos . Needed some more production  tweeking me thinks .

Comment by BrianQ. on April 13, 2021 at 5:04pm

That guitar has an onboard midi interface like the iRig software?

Comment by the anonymous pick on April 13, 2021 at 3:59pm

Thanks guys , It's spring cleanup nowadays in most places ,    a good time to look out for washer and driers ,  Older models have a  end of cycle buzzer , usually located in the top right of the   control panel .  looks like a  lil jackhammer  with an axle  usually banging against a piece of metal or the side of the machine . Another  coil grab. for ya . and some have some funky knobs too.

And then we have piezos .------  musical greeting cards , microwave ovens , some older stylophones , etc etc . aRE all good PIEZO grabs .

On another note . (Amp related , not pickup related . ) In 2006 volkswagon  had a deal with first act guitars ,   You would get a free vw guitar with  purchase of the car , and the car was fitted with a guitar amp in the radio . so you could tailgate party  and just plug you guitar into the car . open the doors and jam out . 

This had folks calling auto wreck yards looking for that radio ..  but . un-benounced to many . the  amp  wont work with  just plugging a regular guitar into it .   The first act guitar had an amp modular circuit in it  that allowed  it to work  with the car radio amp.

However ,  You can still do this with any  car radio and any  guitar , If your car has a 3.5mm input jack, you can get a preamp or headphone amp, and plugthe guitar into it, and the preamp into the car.  presto !  The reason you can't just plug the guitar into the car is that the stereo is looking for a line level signal, of between 1 and 1.6 volts while the guitar puts out about a third of that.

still may have volume issues tho . 

ok .   babble over . 

peace out. 

Comment by BrianQ. on April 13, 2021 at 1:20pm

Ray, best to use wall warts rated higher than 9 volts, the higher resistance will give a louder pickup?

Comment by Southern Ray on April 13, 2021 at 12:40pm

Thanks to Pick for the list. I knew of most of them, but not all. One thing to add, though. If the wall-wart doesn't have some heft to it, it likely doesn't have enough wire to do anything with.

Comment by Southern Ray on April 13, 2021 at 12:38pm

Thank you Peter! Oh goody! I have another thing to tear apart! 

 

Comment by Peter Bryenton on April 11, 2021 at 5:03am

Info for BrianQ:

The DC resistance of the pickup measured at the guitar's output jack socket is 7.3K ohms.

The output level works very well with my Crate GT212 amp at between 3 and 4 on its gain knob. Subjectively it's loud to my ears.

Cheers, Peter.

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor


Recommended Links & Resources


Forum

Cigar Box Amp Mods

Started by Cigar Box Nation in Feature Articles. Last reply by RTZGUITARS on Friday. 14 Replies

Blog Posts

Mr. Bells

Posted by Stephen Cohen on September 4, 2021 at 12:30pm 0 Comments

Bookie's Poor Man's Dobro

Posted by Steve Bookout on July 18, 2021 at 2:04pm 3 Comments

Get your groove on for free

Posted by François on July 13, 2021 at 3:05pm 1 Comment

Latest Activity

AJEICBG liked RON NORTHCUTT's photo
46 minutes ago
AJEICBG liked RON NORTHCUTT's photo
46 minutes ago
Richard Sundberg posted a video
1 hour ago
Uncle John commented on Cigar Box Blues's video
Thumbnail

- Beans fer Breakfast! - One of Daves last projects

"Can't you just about smell the tin can hobo coffee?  Smells great to me and I don't…"
2 hours ago
James Pobog replied to Ben's discussion Wine Box guitar and box airtighness
"Personally, I set pillars in the inside corners and screw to them (though I am far from expert). I…"
3 hours ago
GARAGE HERMIT liked Uncle John's video
4 hours ago
Taffy Evans replied to Ben's discussion A big wine box
"Hi again, I have a bit more time now, so this what I would do. I'll leave you to work out the…"
4 hours ago
Jerry Jordan posted a photo

3x3=9

3 3 strings from St Wishnevsky
4 hours ago
the anonymous pick commented on CLG's photo
Thumbnail

20210919_115618

"pretty slick bud ."
5 hours ago
Jim Morris liked Cigar Box Blues's discussion - Memorial for Dave Lynas -
5 hours ago
Rope Walker Country Star liked Cigar Box Blues's discussion - Memorial for Dave Lynas -
5 hours ago
James Pobog posted a discussion

Starting to plan for....

...a baritone CBG. I have a big square thin box like Shane's and I'm going to try making another…See More
6 hours ago

Music

© 2021   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->