Hi therI'm just building my first cigar box guitar, I have used kwila/merbau for the neck...... laminated 3 pieces, if I'm doing 25" is that from the front of the nut to the front of the bridge or is…Continue
"A cheap econo/dollar store measuring tape is also good for making fret templates, they’re usually only about 6’ long, so you can plan out 2 full size necks on 1? Even the vinyl ones women use for sewing a great for templates, I’ve…"
"i find this online one the best.. http://www.ekips.org/tools/guitar/fretfind2d/
you can save a PDF of the scale and print it out.. only problem is you have to enable flash for this site as it needs it to show the save buttons..
"Yes, measure 25” from the middle of the nut where the strings touch to middle of the bridge? I like to center my nut & bridge at those measurements, works for me , no complaints. If you scroll down on the link to the Scale…"
"thanks for the reply.
thats cool, when you look at like you said............... holding a rubber band, so yeh I'll make the nut and bridge and see where the strings fall on them, measure from there. Like you say they could vary a…"
"Easiest way to figure it out (well, for me anyway) - it's exactly at the point where the strings make contact with the bridge or nut. Depending on how each is cut, that could slightly vary from the "front" or "back." Just…"
thanks for the reply, no I don't have a template, I'll just use one of the free online fret calculators, I'm am used to working in mm so I have convert it all from inches to metric.
thanks for the link, looks as though…"
Hi therI'm just building my first cigar box guitar, I have used kwila/merbau for the neck...... laminated 3 pieces, if I'm doing 25" is that from the front of the nut to the front of the bridge or is that measurement taken from the middle?.built my own box 300mm long x 250mm wide and 80mm thick, used 12mm MDF for the sides and good 4mm plywood for the top and bottom, going to stick a piezo under the lid.had a bit of fun building it up, so I have another 2 on the go, I make my own boxes as…See More