I am looking for a way to install a tele pup in my next build. I saw a drawing on this subject here once.Should have saved it! Any one have any pics they would like to share? Thanks in advance.Continue
Hello nation, can any one tell me how to wire 2 piezo's in parallel? I want to use a pot,2 piezo's and a jack. Also ,another way I was thinking of is using 2 vol. pots. Is this a good idea? What do…Continue
"I lost the paper that came with mine while moving, but I believe the operating voltage is 9V to 12V.
Use 2 9volt batteries in parallel for longer use or a 9volt Walwart with a high milliamp rating(800ma or higher). Walwarts can sometimes cause RF…"
"Hope its OK to resurrect this thread. I installed the psycho knob in my amp and yes it does suck a battery dry pretty quickly when its shared with the power amp. Especially on the highest setting which gives me a nice lo-fi fuzz effect, albeit…"
Hi Bizzaro...For my Tenor Ukes with steel strings, I use Electric guitar strings: Low G=26W, C=17, E=12, A=10. The string anchor point should be as short/close to the bridge as possible, no more than 2 inchs, because the total length of the string has a lot to do with way the string vibrates even though it is terminated by the bridge and nut. Having a sharp angle on the string at the bridge and nut is also very important. I always use a neck through for my steel string ukes.