I've built a few electric guitars and a 5e3 clone valve amp so now I'm building a CBG and matching CBA. I have the cigar boxes (Cohiba) and an old 24.75" scale length neck in my collection.I have all…Continue
I am building a 6 string CBG with a gold foil humbucker near the neck and one or two piezo pickups, running through a preamp/buffer circuit.I want to use a push-pull on the volume pot to switch to…Continue
"Finished the CBA and strung up the CBG and intonated. All good. Very happy with the speaker which is a Visaton KT100-V 8 ohm. I chose it because its frequency response was very close to a 'normal" larger guitar amp driver.…"
"That's a good chip. I like the Ruby amp and I made a dual chip amp design based on the Ruby amp and Trotsky distortion pedal that's like a Ruby amp on steroids.
I also like to use a Ruby "head" as a preamp through a 20watt PA amp…"
"Finished the CBG. Just need strings and setup. Photos attached. One of the pics shows the brace built for the middle with the two circular cutouts where I buried a couple of piezos i hot glue for under the bridge."
"Mark, good looking start. As for speakers, can't really advise you. I'll tell you that the Eminence speakers that came with my Foot Note amp kit sound pretty good to me, and others have commented positively on Eminence speakers within…"
I've built a few electric guitars and a 5e3 clone valve amp so now I'm building a CBG and matching CBA. I have the cigar boxes (Cohiba) and an old 24.75" scale length neck in my collection.I have all thge parts ready and have starting marking up (pics attached). Will usexa couple of piezo pups under the bridge and blended with a humbucker in the neck position. The amp will use a Ruby variation. Searching for a high quality, suitable speaker driver to fit the box whilst providing a decent…See More