Mance Lipscomb Tribute

Built on an Undercrown box, four string fretless. Rod piezo, volume and tone controls. Wenge fingerboard and bridge, Chestnut burl veneer on headstock and tailpiece. To be auctioned off for charity at the Navasota Bluesfest August 14-15 in Navasota, Texas.
Read more…
E-mail me when people leave their comments –

You need to be a member of Cigar Box Nation to add comments!

Join Cigar Box Nation

Comments

  • Hal, that is interesting about the box joints.  Perhaps I should glue in some glue blocks inside.  I won't have your problem because I have neither a power planer or jointer.

    I have found one box that is both bigger and better sounding.  It is a JFR.  They made 2 identical sized boxes, one is plywood and rattly and shitty.  The other is solid wood, except the bottom, which is the top on mine.  It has a massive, sliding top, no box joints.  Mine is the only one I have ever seen.306468781?profile=RESIZE_1024x1024306471347?profile=RESIZE_1024x1024 

  • nice 

  • Looks good, Gary!  BTW, one of the things I like about the Undercrown boxes is that the sides are solid cedar and they are thick enough to run through my jointer to remove the stamped in labeling. Unfortunately, I found out that the box joints are not glued (just a real tight press fit) and ruined one when the planer's blades caught the edge and pulled it apart!

    Scared the sh#t out of me, too!

  • Hal, I also think arching the top is a neat idea.

  • Thanks for all the information Hal and UJ.

    No, I haven't tried Pandora yet.  I use Youtube a lot.

    Here is my Undercrown 3 string.  I just flipped the box over and it sounds good.  I like it a lot.  It is the only 3 string I have built.  Also another, even larger Undercrown box I haven't used yet.

    306468647?profile=RESIZE_1024x1024

  • Thank you, Gary.  This was my first with an Undercrown box.  Yep, they are nice boxes to work with.  I discard the the thick top and replace it with a nice tonewood, suitably thinned and braced.  I even worked a bow into it to make a sort of "archtop" that helps it resonate better.  It is truly fretless.  I marked the fret position reference points by cutting slots into the fingerboard and filling them with white Plastic Wood, then sanding it smooth.  Same for the position dots on the side.

    Mance Lipscomb was a blues "songster" born and raised in Navasota, Texas, the official Blues Capitol of Texas. His life was detailed in a short film, "A Well Spent Life", and  his autobiographyI Say Me for a Parable: The Oral Autobiography of Mance Lipscomb, Texas Bluesman, narrated to Glen Alyn, which was published after his death.  There are also several YouTube videos of Mance playing in his unique style.  This year marks the 20th Annual Navasota Bluesfest dedicated in his honor,

    I sell my guitars, amps, and ukuleles in Blues Alley, a store on the main drag that has a museum dedicated to Mance, the Blues, and Navasota history including Frank Hamer, the Texas Ranger who tracked down and killed Bonnie & Clyde.  Hamer was City Sheriff in Navasota from 1908 to 1911, bringing law and order to a lawless boom town where at least a hundred men died in shootouts on the main street over a two year period.  

    So far, there haven't been any shootouts since I've been there.

  • Gary, have you tried the free internet radio, Pandora?   You can choose a genre like classic rock, classic blues, Delta Blues, etc. 

    You can choose a band or artist like Mance.   They will not play all Mance, but stuff they think is similar. 

  • Love it.  I have been listening to some Mance lately.

  • That is beautiful work.  Especially the headstock.  I like those Undercrown boxes a lot.  They sound and look good.  Would you say Semi-fretless?  BTW I don't recognize the name Mance Lipscomb.

This reply was deleted.