Profiled cut polished with 240/600/1000/1500/2000 grit wet and dry paper and finished off on the lightest buffing mop I have with blue compound.

Views: 43

Comment

You need to be a member of Cigar Box Nation to add comments!

Join Cigar Box Nation

Comment by Brian Thompson on February 13, 2019 at 4:09am

Thanks for the like AGP#, really appreciate it! :-)

Comment by Brian Thompson on February 11, 2019 at 1:59pm

Thanks for the likes Denbo, really appreciate it!

Comment by Brian Thompson on February 11, 2019 at 1:36pm

Here you go Dave.....I use these packs from amazon uk (top of page listing); https://www.amazon.co.uk/s/ref=nb_sb_noss?url=search-alias%3Daps&am... You get two large sheets in each grit, and it's super quality.....a little goes a long way.

I'm sure you could find something similar on your side of the pond, although the nearest packs I could find on amazon america are these; https://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&...

I used it wet when I did my slide, and also used a bit of metal polish as a final stage after a careful (watch the heat build up....it can crack the glass!) buff on my lightest mop with my drill.

While I'm talking about my approach with abrasives (others have theirs) I might as well add this too....On wood I use it dry, after sanding with coarse/medium/fine/extra fine sandpaper, By then, the wet and dry is really just smoothing and polishing and only needs minimal work with each grit....more of a wipe over really, but it's worth it. The walnut fret board I just finished today is actually shiny when the light catches it, just what I wanted for a fret-less, and a dab of lemon oil is all it will need to finish. After giving it a good wipe over with some paper towel to get rid of any fine grit in the grain I spray on a thin coat of sanding sealer on the rest of the neck stick, once dry it only needs another wipe over with some 1500/2000, then a not too thick coat of satin lacquer. Once that's dry everything is so smooth I just give it a light buff with some fine cut polishing compound and finish with a dab of guitar polish and it's done. I prefer the sanding sealer to a grain filler on sapele, as it gives a lovely, tactile semi-open grained finish after lacquering. It sounds laborious but it honestly doesn't take long at all once all the primary sanding is done.

As you'll see in the links earlier in this post, you can even get 7000 grit paper.....!! I stop at 2000 because that is 'behavioural' enough as it is.....7000 is ridiculous.....no, it is, really.......aaaarrrgghhh!!!!!! 

Too much info again Dave, probably, but if it helps you and other members then great.....!! That's what it's all about. :-) Hope it helps.

Eddie Van Typewriter......(ha!)

Comment by Dave Lynas on February 11, 2019 at 12:23pm

Wow, that answers my question completely! Perfect work! Where do you find such fine papers?

Comment by Brian Thompson on February 11, 2019 at 10:49am

Thanks Bob, appreciate it!

Comment by Bob "Ambrose" Negus on February 11, 2019 at 9:19am

Looks great!... impressively smooth.

Comment by Brian Thompson on February 11, 2019 at 3:07am

Thanks Don, as always, for your kind and encouraging comment. It took me a while to get it like that....! It only increases the respect I have for guys like 'Bones' who can turn 'em out by the dozen in no time at all....boy, there are some skilled craftspeople around these parts doing amazing things, and so generous in sharing their knowledge and encouraging newcomers like myself, as you do too Don. Thanks again bud.

Comment by Don Craig on February 10, 2019 at 8:00pm

Nice polishing!

The Essential Pages

New to Cigar Box Nation?How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

 

Recommended Links & Resources

Featured Instrument Video

Forum

Etsy sales

Started by Angry Rooster Guitars in Other stuff - off topic, fun stuff, whatever. Last reply by Angry Rooster Guitars on Monday. 17 Replies

Latest Activity

Daniel Walter commented on Jim Morris's photo
Thumbnail

Batfink/Professor Vibrato Cello

"very unique. nice !"
4 minutes ago
Dave Lynas liked Jim Morris's video
7 minutes ago
Dave Lynas commented on Jim Morris's video
Thumbnail

Batfink Professor Vibrato Cello

"Very nice Jim. Has the vibrant tones of a fine Dr. Vibrato of Cremona circa 1423. Don’t…"
7 minutes ago
Jim Morris commented on Jim Morris's video
Thumbnail

Batfink Professor Vibrato Cello

"Thanks Keith. Good thing I was snowed in yesterday so I'd have the free time to mess with…"
9 minutes ago
Daniel Walter posted photos
12 minutes ago
Jim Morris posted photos
18 minutes ago
Keith Rearick commented on Jim Morris's video
Thumbnail

Batfink Professor Vibrato Cello

"Doesn't sound too bad. Figured you would be the first one to build it, and share a video. Good…"
32 minutes ago
Keith Rearick liked Jim Morris's video
35 minutes ago
Jeff 'Bones' Reilly liked Randy S. Bretz's photo
37 minutes ago
Keith Rearick commented on Kentucky Mojo's video
Thumbnail

Cigar Box Ukulele Blues

"Really like this, and Kenny sure can play."
37 minutes ago
Keith Rearick liked Kentucky Mojo's video
39 minutes ago
Jim Morris commented on Dave Lynas's video
Thumbnail

Camel Train

"Very cool sounds you're getting from that grunt stick! Perfect guitar part to go along with it…"
47 minutes ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->