AGP #498 - “Saw 3”3 String Fretless Saw Blade GuitarScale: 584.2mm / 23 inchesStrings : .044NW/.030NW/.020NW/Tunings: GDg/AEaThis 10” Spruce Pine Block Rim Body is the last one of four I built back in March last Year, the Neck is recycled Tasmanian Oak, a Jarrah Stain was applied, and an Acrylic Clear Gloss was then used as a final finish.The 7¼” Tungsten Tip Saw Blade was a rusty discard from somewhere, which I cleaned up with a wire brush wheel in a drill.A Clear 9.2k Alnico Single Coil Pickup is Wired through Volume and Tone Pots to the Output Jack.I thought about putting back on it, but it sounds just fine without one. :-)
Read more…
Comments
YUP!, Good Idea "BQ", I do have some Kangaroo hide, which I've used on a few Drums & Banjo's etc., over the years :-)
If you ever get a hankering to make a bongo, this is exactly how they make them?