Thanks Bluesheart. I build these guitars for enjoyment as I'm "retired". The name of the game is to perfect the craft, so it's important that each one is a little better than the last. Had to set up a booth to sell a few because the more I make, the smaller my house gets. The rack is made out of 3-10"sections of thickwall 3/4 PVC tubing cut as follows; 4-5' sections, 2-2' sections, 6-6" sections, and 2-2" sections. (The 5' sections could be cut to whatever width is required. 5' just worked out to use the most of materials) 8-90 degree fittings, 4-3 way fittings and 3 5' sections of insulating foam tubing. It's not glued, just press fit so I can take it apart for transport. A very cheap way to display the guitars.
Comments
Great - very cool.
Ohhh! I missed these before. Nice. I especially like the fine dining git on the right.
Thanks Bluesheart. I build these guitars for enjoyment as I'm "retired". The name of the game is to perfect the craft, so it's important that each one is a little better than the last. Had to set up a booth to sell a few because the more I make, the smaller my house gets. The rack is made out of 3-10"sections of thickwall 3/4 PVC tubing cut as follows; 4-5' sections, 2-2' sections, 6-6" sections, and 2-2" sections. (The 5' sections could be cut to whatever width is required. 5' just worked out to use the most of materials) 8-90 degree fittings, 4-3 way fittings and 3 5' sections of insulating foam tubing. It's not glued, just press fit so I can take it apart for transport. A very cheap way to display the guitars.
Great job on that rack too!
What a great looking selection!!