Check out the attached photos. If you keep turning the truss rod adjustment nut, you will strip it. You will also destroy the truss rod and finger board.
Do not over adjust the rod! This was a return to me...it was flat when sent. A new rod and
I have a couple piezo-electrocuted guitars, and they tend to feed back on higher gain and volume settings. When I place my arm firmly on the box right aboot where the piezo is placed in the box it eliminates most of the feedback. My question is, if I
I made a nice walnut neck and cut frets and for the box at a 25.5" scale length..
What I did not pay attention to was that I used extra length for the head stock...so now I have a neck cut for frets and a 22" nut to end of body length....