Comments

• 

  Murray April 6, 2014 at 1:48pm

  2011 friend request - I guess I haven't been on here in a while...
• 

  John February 23, 2013 at 12:22am

  Ugh! Sorry about how messy that last post was. I'm still trying to figure out how to use all of this! lol
• 

  John February 23, 2013 at 12:21am

  Hey Mungo... I just read where you wrote...

  "Michael;

   I chased after these things for a while, then ended up buying something like this:

  http://www.ebay.ca/itm/Value-Choice-TDA2030A-Amplifier-Amp-board-DI...
  

   

  http://www.ebay.ca/itm/PK1-TDA2030A-Audio-Amplifier-Amp-Board-DIY-K...

   

  In the end it was easy and cost about right, however if you are bound and determined to learn about electronics this will not do it, basically a hook it up to a speaker, add a box and some knobs and you are done like dinner.

                   Cheers Ron."

  Is there any chance you can post a picture of how you wired them up into a CigarBoxAmp? I've been having trouble getting one made, and if this helps, I think I'm going to go this route. Any help would be appreciated! Thanks!
• 

  bairfoot cajun September 12, 2011 at 1:12am

  thank you sir for your comment about the tri-cone sound check vid--yes i search for different tones and usually find them.so the sound is what i look for in a progress build.
• 

  Keni Lee Burgess May 12, 2011 at 1:15pm

  The possibilities are endless.

  EAD tune DAD

  ADg tune GDg

  Dgb tune Df#a

  gbe tune gbd

  How do you want to tune is the question? Enjoy, Keni Lee 
  
  
• 

  Paul Doug November 28, 2010 at 8:27pm

  Mungo Park, thanks for the friend invite. The neck is finished with pure Tung Oil. Hand rubbed five coats.
• 

  Keni Lee Burgess May 5, 2010 at 9:47pm

  Thank you for your purchases. Please feel free to contact me if any questions arise as you work through the lessons. Enjoy.
• 

  BassKemist May 5, 2010 at 5:25am

  Hey Ron
  
  It's all about the enjoyment of making it..I find.
  
  I have access to a nice workshop too and have friends with lathes so can do some very rudimentary metal work . Hence the bit of brass as the bridge.
  
  Look forward to seeing / hearing your output soon
  
  All the best
  Mark
• 

  Keni Lee Burgess March 1, 2010 at 2:58am

  Thank you Ron for your interest and support. The auctions recently ended. They are relisted now.
  
  http://shop.ebay.com/njmikeb/m.html?_nkw=&_armrs=1&_from=&a...
• 

  Keni Lee Burgess February 27, 2010 at 9:42pm

  Thank you Ron for your interest. Do you know I currently offer, free 4 string CBG lessons here on my group? If you would like to get a better understanding, I would suggest CD 1 and CD 2. Although they are geared for a 6 string, you will quickly see how it is the application of open tuning that makes it easy to alter these lessons from Open D 6 string (DADf#ad) to 4 string (Df#ad) on CD 1 and complimenting the free lessons nicely from Open G 6 string (DGDgbd) to 4 string (Dgbd) on CD 2. The strings on the guitar are the same, you just change the tuning. In addition, if you build a 6 string CBG someday, you will be good to go too. Please feel free to write if you have further questions. Enjoy, Keni Lee