Comments

• 

  Keni Lee Burgess September 8, 2011 at 7:59am

  Thank you Charles for joining my group. Feel free to write if you have any questions. Please check out my instructional video CDs:

  http://www.ebay.com/sch/njmikeb/m.html?_nkw=&_armrs=1&_from...

  Enjoy your practice, Keni Lee
• 

  Nathan King February 16, 2010 at 1:46pm

  Hey Charles!
  That headstock/neck was made from a typical 1x2, so the neck and headstock is 1.5 inches wide, .75 inches deep. The eye bolts, I've since forgotten what size they were... but if ya went to your hardware store and bought some, just look for some that look big enough to drill a hole through the shaft of (assuming you were gonna do the same thing I did).
  
  If ya have any other questions, don't hesitate to ask!
  
  -Nate
• 

  Tres Seaver February 16, 2010 at 11:04am

  Welcome aboard, Charles! You will find lots of helpful folks and information here on all things CBG (CBU, CBB, etc.) Feel free to poke around, ask questions, and post your stuff (photos, recordings, videos, etc.).
  
  Most of all, have fun!
  
  Tres.