Hi Guys,

  I'm new at this and I would like to know how much distance to put between the strings center to center. The neck on my guitar,( my first attempt), is an inch and a half wide. Is half an inch enough room between the strings ?  Thanks,Bob

Views: 3518

Replies to This Discussion

Hi Bob, Some builders I know, and me included,would like to, and are trying to make a 1.5 inch wide fretboard as a sort of "standard" dimension for three string CBGs. The middle string down the center, and the outside strings 3/16 in from each edge. The players like those specs for picking. As the three bears say, not too wide, not to narrow, but just right.
My necks are 1 3/4 wide and I use a 1/2 space between the strings. It works.
Richard,
Thanks for your help, it is hard to know some of this stuff when you are just getting started. I found out long ago that there is no shame in asking, if you don't know something, you need to ask before you mess it up. If I cut the bridge the same as I set up the holes for the tailend then it looks like my spacing is going to be about .475 inch apart. I guess that will work for me for the first one anyway. What doc most builders cut their bridge slots with and how close should they fit the strings? Thanks again, Bob H.

Richard Sanabia said:
Hi Bob, Some builders I know, and me included,would like to, and are trying to make a 1.5 inch wide fretboard as a sort of "standard" dimension for three string CBGs. The middle string down the center, and the outside strings 3/16 in from each edge. The players like those specs for picking. As the three bears say, not too wide, not to narrow, but just right.
Michael,
I appreciate your good advice and as I told Richard above, it looks like I am going to end up setting them at about .475 inch apart. That is just about halfway between what each of you recommended. I think it will work for me ,anyway. Thanks for getting back to me on this. I am a rank beginner and I feel like I am feeling my way along in the dark sometimes. I appreciate your help. Bob H.
As far as the bridge..I slotted one with a hacksaw. Use a bolt.. works great bc they fit a slot regardless of spacing : ) I've got a couple bridges that aren't slotted at all. steel rod..seems to work fine... Any advice on that , from the more seasoned players?
Thanks for the reply Dave.

David Fultz said:
As far as the bridge..I slotted one with a hacksaw. Use a bolt.. works great bc they fit a slot regardless of spacing : ) I've got a couple bridges that aren't slotted at all. steel rod..seems to work fine... Any advice on that , from the more seasoned players?
Coming from the stick-dulcimer (strum stick) perspective, the necks are narrower than what guitar players use and the strings are placed like 9mm (0.9 cm, or just under 3/8") apart. Since the neck width is 22mm, that leaves about 2mm between each of the outer strings and their respective side of the neck. From my rather clumsy fingering experience, extending the width of the neck by 2mm on each side of neck between the edge and the outer strings would be helpful in preventing your melody string from catching on the edge of the metal frets. The string spacing you prefer probably depends on your background - what you are used to. For a three stringed instrument, that might be guitar sting spacing or stick dulcimer spacing.
Thanks for the info. I am making stringed intruments for each of my grandchildren and they need all the room I can give them so they don't make too many mistakes.
to the neck edges is best
Do you mean put the middle string right down the middle and the other two clear to the outside of the neck? What width of a neck are we talking about? Most of mine are 1.5 inches wide and fairly parrell sided. That would be about 3/4 of an inch between strings and that sounds like too much to me. These grandkids of mine are small kids, the oldest is a girl of eleven years and she is small for her age. Her sister who is eight is just as big as she is. The boy is six years old. Bob H.
yes thats best, it not important the width of the neck, just that the middle string in the middle and the other 2 spread out to the edges....thats the easiest way to learn.

Robert Hynden said:
Do you mean put the middle string right down the middle and the other two clear to the outside of the neck? What width of a neck are we talking about? Most of mine are 1.5 inches wide and fairly parrell sided. That would be about 3/4 of an inch between strings and that sounds like too much to me. These grandkids of mine are small kids, the oldest is a girl of eleven years and she is small for her age. Her sister who is eight is just as big as she is. The boy is six years old. Bob H.

Robert,

 

The thing about advice is to check out who's talking... BeetleJuice (aka RedDog, aka John McNair) is probably one of the authorities on three string guitars, including CBGs.  Now there are a lot of people with different opinions on the subject, but don't discount what John has to say on the subject...

Advice?  Build a CBG with bolts for nut and bridge and then you can try out an infinite number of string arrangement (including assymetrical setups) and form your own opinions based on your playing style and what feels right to you...

 

the best,

 

Wichita Sam

Robert Hynden said:

Do you mean put the middle string right down the middle and the other two clear to the outside of the neck? What width of a neck are we talking about? Most of mine are 1.5 inches wide and fairly parrell sided. That would be about 3/4 of an inch between strings and that sounds like too much to me. These grandkids of mine are small kids, the oldest is a girl of eleven years and she is small for her age. Her sister who is eight is just as big as she is. The boy is six years old. Bob H.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Discussion Forum

Beter Tuners?

Started by Tex Pierce. Last reply by Gus K Feb 21, 2017. 4 Replies

Bouzouki... kind of a three stringer

Started by Greg Thompson Jul 19, 2016. 0 Replies

Hiii spacing for 2 strings

Started by Yuno Dec 11, 2014. 0 Replies

tabs

Started by Mal Chilvers. Last reply by Jim Woods Oct 27, 2013. 5 Replies

John Denver

Started by Mal Chilvers. Last reply by jamie bark Feb 13, 2013. 1 Reply

string gauges

Started by Mal Chilvers. Last reply by Slowpaw Steve T Dec 5, 2012. 4 Replies

Cohiba

Started by Mal Chilvers. Last reply by Jay Caughron Sep 25, 2012. 8 Replies

Through the box VS on top of the box necks

Started by Mike Huber. Last reply by BeetleJuice! Sep 2, 2012. 7 Replies

strings

Started by alan hepple. Last reply by BeetleJuice! May 2, 2012. 4 Replies

Piezo help

Started by Ed McCormack. Last reply by Ed McCormack Feb 25, 2012. 4 Replies

truss rod, when is it necesasary?

Started by Lonman. Last reply by Lonman Oct 25, 2011. 2 Replies

Ads for 3 string guitars...

Started by Lowatter. Last reply by BeetleJuice! Oct 23, 2011. 2 Replies

3 String Tabs??

Started by Graham. Last reply by Jeff Sacree Aug 13, 2011. 8 Replies

Great lessons!

Started by Justin Mantelli. Last reply by Justin Mantelli Aug 5, 2011. 3 Replies

Different wood types

Started by David Tutterrow GutBucketGuitars. Last reply by KaptnKen Jul 25, 2011. 9 Replies

Box Size -vs- Sound?

Started by James Boutilier. Last reply by James Boutilier Jul 1, 2011. 5 Replies

String trees

Started by Mike Huber. Last reply by Mike Huber Jun 3, 2011. 6 Replies

cgb reverve

Started by Mal Chilvers. Last reply by Wayne Bigler Jun 3, 2011. 1 Reply

String spacing for a three string guitar

Started by Robert Hynden. Last reply by Wichita Sam May 21, 2011. 12 Replies

guitar strings

Started by Craig Cox. Last reply by legnahkra May 16, 2011. 4 Replies

Blog Posts

Cheesecake Banjolele

Posted by James Matthews on May 21, 2019 at 7:14pm 3 Comments

Latest build

Posted by Sean Murphy on May 8, 2019 at 9:03pm 4 Comments

Netherlands Tour

Posted by Dar Stellabotta on May 8, 2019 at 5:33pm 0 Comments

Latest Activity

Anthony adams commented on Uncle John's video
26 minutes ago
Anthony adams commented on Dave Lynas's video
Thumbnail

Slight of Hand

"I didn't think it possible, but your twin is uglier than you. But I love the video! Thanks"
27 minutes ago
Anthony adams commented on Dave Lynas's video
Thumbnail

Cloudy Blues 1

"Thanks Dave"
31 minutes ago
Jerry Jordan commented on Fred Lanzarotti's photo
Thumbnail

46BDAB95-E769-453A-B21A-537474EAB6D7

"I bought 10 sets of those strings.,.,.,70 cents a set from china.,.,,never again.,.,,nice build.,.,."
47 minutes ago
Jerry Jordan commented on Doug Thorsvik's photo
Thumbnail

Pizza Box Guitar-2

"those frets are the bees knees.,.,"
49 minutes ago
Jerry Jordan commented on Doug Thorsvik's photo
Thumbnail

Pizza Box Guitar-3

"That is wicked cool.,.,.,.,great job.,.,.,,."
50 minutes ago
Jerry Jordan commented on Doug Thorsvik's photo
Thumbnail

Pizza Box Guitar-1

"excellent.,.,cool build.,.,.,I bet there are lots of these out there that were built after the 6th…"
51 minutes ago
Tom T replied to Rob's discussion Resonator string tension
"Apologies Rob. Old eyes often misread computer screens. Vienna is a beautiful city any time of…"
51 minutes ago
Poorness Studios liked AGP #'s video
1 hour ago
Poorness Studios liked Doug Thorsvik's photo
1 hour ago
Amir Sagi replied to Amir Sagi's discussion My Version for the CBG - The CBGR
"The box is 195mm wide and 300mm long. Depth is 50mm"
2 hours ago
Dave Lynas commented on BeetleJuice!'s video
Thumbnail

Old Time Cigar Box Guitar Blues

"I needed that mellow play Beetle. Thanks my friend."
2 hours ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->