Ladies and Gentlemen

I recently finished my first CBG. I put in the Gold Nugget Piezo pickup w/volume pot that I got from CB Gitty. I'm plugging into a Danelectro Honeytone. Getting a loud background hum, but it goes away if I touch the volume pot knob, or the metal ends of the cable. I'm hoping there is a way to eliminate or minimize the hum. Any suggestions greatly appreciated. Thanks!

Views: 205

Replies to This Discussion

Sounds like an earthing or polarity problem to me.

Are you sure that the earth wire from the piezo is soldered on to the sleeve tag on the phone jack?

Also on your volume pot there are 3 tags on the pot...1 is earthed to the pot metal cover, 2 is connected to the tip tag on the phone jack 3 is connected to the positive wire from the pup. The pot metal cover also needs to be earthed, so basically you have a wire from the 1st tag on the pot going to the pot metal cover, and then to the negative sleeve tag on the phone jack.

That should solve your humming issues.

I agree with bruce, it sounds like its not earthed properally which is what you are doing when you touch the cable.

i always struggled to earth the pot's casing, as it needs to get really hot, may be try there first?

 

Cheers and goodluck

 

Cliff

Ahhhh...soldering to pots!

There is only one way to do it, or you risk destroying the pot:

Prepare the metal surface of the pot by scratching a small patch on the pot with an awl or even a nail.

Then clean that area with some soldering flux or spirits of salt.

Next melt a blob of solder on the iron.....it needs to be a fair sized blob, and it needs to be almost dripping off the iron.

Hold the iron as close as possible to the prepared patch on the pot so that only the blob of solder touches the pot....not the iron!

Once the blob has heated the patch enough it will flow onto the patch.

You can then momentarily swirl it around on the pot with the iron.

I quickly attach a length of wire to the blob on the pot....then leave it alone.

I only ever attach one wire to the pot like this....other earth wires I attach to negative tags & the length of wire soldered to the pot.....not the actual pot. This eliminates the possibility of ruining the pot by further heating.

I learnt this from reading Josh Gayou's article from Smokehouse guitars.

Looking him up on the net for some very good information.

Thanks for the replies. Greatly appreciated. The piezo I used was pre-wired / soldered from CB Gitty as I figured I could avoid any problems with it on my first build. I'll open 'er up and take another look. Thanks again.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Discussion Forum

Beter Tuners?

Started by Tex Pierce. Last reply by Gus K Feb 21, 2017. 4 Replies

Bouzouki... kind of a three stringer

Started by Greg Thompson Jul 19, 2016. 0 Replies

Hiii spacing for 2 strings

Started by Yuno Dec 11, 2014. 0 Replies

tabs

Started by Mal Chilvers. Last reply by Jim Woods Oct 27, 2013. 5 Replies

John Denver

Started by Mal Chilvers. Last reply by jamie bark Feb 13, 2013. 1 Reply

string gauges

Started by Mal Chilvers. Last reply by Slowpaw Steve T Dec 5, 2012. 4 Replies

Cohiba

Started by Mal Chilvers. Last reply by Jay Caughron Sep 25, 2012. 8 Replies

Through the box VS on top of the box necks

Started by Mike Huber. Last reply by BeetleJuice! Sep 2, 2012. 7 Replies

strings

Started by alan hepple. Last reply by BeetleJuice! May 2, 2012. 4 Replies

Piezo help

Started by Ed McCormack. Last reply by Ed McCormack Feb 25, 2012. 4 Replies

truss rod, when is it necesasary?

Started by Lonman. Last reply by Lonman Oct 25, 2011. 2 Replies

Ads for 3 string guitars...

Started by Lowatter. Last reply by BeetleJuice! Oct 23, 2011. 2 Replies

3 String Tabs??

Started by Graham. Last reply by Jeff Sacree Aug 13, 2011. 8 Replies

Great lessons!

Started by Justin Mantelli. Last reply by Justin Mantelli Aug 5, 2011. 3 Replies

Different wood types

Started by David Tutterrow GutBucketGuitars. Last reply by KaptnKen Jul 25, 2011. 9 Replies

Box Size -vs- Sound?

Started by James Boutilier. Last reply by James Boutilier Jul 1, 2011. 5 Replies

String trees

Started by Mike Huber. Last reply by Mike Huber Jun 3, 2011. 6 Replies

cgb reverve

Started by Mal Chilvers. Last reply by Wayne Bigler Jun 3, 2011. 1 Reply

String spacing for a three string guitar

Started by Robert Hynden. Last reply by Wichita Sam May 21, 2011. 12 Replies

guitar strings

Started by Craig Cox. Last reply by legnahkra May 16, 2011. 4 Replies

Blog Posts

Cheesecake Banjolele

Posted by James Matthews on May 21, 2019 at 7:14pm 3 Comments

Latest build

Posted by Sean Murphy on May 8, 2019 at 9:03pm 4 Comments

Netherlands Tour

Posted by Dar Stellabotta on May 8, 2019 at 5:33pm 0 Comments

Latest Activity

Poorness Studios liked AGP #'s video
38 minutes ago
Poorness Studios liked Doug Thorsvik's photo
46 minutes ago
Amir Sagi replied to Amir Sagi's discussion My Version for the CBG - The CBGR
"The box is 195mm wide and 300mm long. Depth is 50mm"
1 hour ago
Dave Lynas commented on BeetleJuice!'s video
Thumbnail

Old Time Cigar Box Guitar Blues

"I needed that mellow play Beetle. Thanks my friend."
1 hour ago
Dave Lynas liked BeetleJuice!'s video
1 hour ago
Dave Lynas liked Andries D. EKER's video
1 hour ago
Dave Lynas commented on AGP #'s video
Thumbnail

AGP #350 ''Hofcam'' Rumble 24th May 2019

"I love seeing you play AGP. I have to turn my volume way down but I get a sound nip that way…"
1 hour ago
Dave Lynas liked AGP #'s video
1 hour ago
Taffy Evans replied to Rob's discussion Resonator string tension
"Hi Rob, to build the guitar itself would be the same, the inference is the type of cone used, if…"
1 hour ago
Dave Lynas commented on Dave Lynas's video
Thumbnail

Cloudy Blues 1

"I don’t like my dub AGP. I might try a replacement this morning. The banjer just sounds out…"
1 hour ago
Will "KOOL DOG HOOCH" Bonner commented on AGP #'s photo
Thumbnail

AGP #356 - ''LOWDM''

"Great job, the vine on the fretboard really is a nice touch. How long is the box? I'm working…"
1 hour ago
AGP # posted photos
2 hours ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->