A while back I built a cajon for my grandson with a built-in snare. It came out great and the snare added a whole different dimension to the sound.

I'm currently working on a reso CBG using an Old Lowe cone with a rod piezo in the biscuit bridge.

Has anyone thought about adding a set of snare springs inside a CBG, riding on the reso for a built-in reverb effect?  If not for reverb, how do you think it would effect the sound?

I searched the web for "snare guitar", "spring reverb", etc, but couldn't find anything.

Views: 530

Replies to This Discussion

I don't believe I've heard of this application. We'd like to hear how it sounds when you've got it ready.

  Just at a guess, i'll bet you end up with 'Drone strings',actual tone based on the tension-a loose enough tension would make a 'snare rattle' and tighter tension an actual ringing or droning echo...

https://en.wikipedia.org/wiki/Hardanger_fiddle

https://en.wikipedia.org/wiki/Sitar

 I'm only guessing though-love to hear yours when you finish!

Order99 -

Thanks for your thoughts.  Both the Hardanger and Sitar use sympathetic strings that are anchored at both ends and tuned to a specific note.  The snare springs are loose at one end.  I'm thinking that the loose ends "rattling" against the resonator cone and picked up by the piezo would make that echo come alive.

Wade -

That was my original thought (the springs and eye hooks), but then I remembered the snare.  I'm going to pick one up this weekend and incorporate it into my build with some sort of "on/off" device and see what happens.

Hal,

I think Shane and some others played around with this idea. Kind of like those toy microphones that add that reverb effect. Someone had a sketch on here a long time ago( it may have been on the original yahoo forum!) it was basically a small eye hook screwed in under the bridge with a spring and attached to a corner of the box on the inside. Wanted to try this for a long time, but always in a hurry to close things up and get to my next project

Hope this helps,

Wade

my   first  swamp witches    all  had a reverb  spring inside and are  now     only installed  upon  request  . 

it  added  a slight  sympathetic  reverb/  drone    and slightly  more    enhanced     if run  under the  pickup  .

brought  out  more  with  bass   or  playing hard    or  knocking  .   but  otherwise  hard  to  notice  off hand .

i  understand  this  is not the same  setup  you  are  describing  ,  but  .......

i  recently   made a goatskin reso  and  attached the  end of  the    spring  right onto  the skin  (by  the bridge ) with  hot  glue, and stretched  it  down  to  the body  to act as  one of those kids echo  mics  ,,  it  works    , and echos   pretty  good  .

i  believe  if  your  starting point   is  on the    reso   , it  will   act better  as a  drone  /echo   than  running it across  . or  bridging it  underneath.  as a  "snare "    it  may  be a sustain / reso  killer .  or  uneventful.

think  how  much   impact a   drum  takes  compared to  a guit strum.

there's  my  free advice ,  and  probably  worth  every penny  ;-)

I like the sound of this idea, no pun intended, it's certainly something worth trying out, I myself just yesterday, bought a type of small drum, head like a tight skinned tambourine which I want to try as a sound well beneath a resonator cone, and also within an accoustic cbg. Going back to your snare idea.
Within some very old Hawaiian instruments they found very small slivers of metal almost wafer like stuck to the inside of the body in a way that they would wave inside with the resonance, so there is good reason to believe that your idea could work.
I would think that the finer the snare springs were and the deftness of their touch upon the reso cone would transfer into sound changes, with experimentation.
So I salute you for this concept, and would love to know how it works for you.
Nothing ventured etc, better than wondering endlessly wether it would have worked.
Best Wishes, keep me posted,
Philyaboots
Stopped posting just, and it hit me in the face Durr, a combination of yours and mine could well be the way to go.

Sympathetic strings inside the box. Jus an experiment. The guitar sings back whater notes the four strings inside are tuned to 

God that's genius stuff, it's sorta inside the box thinking.
Is this one of those woke up at 3 am moments.

It's a way to experiment with an idea I have. When you try out these things you run into all types of problems on such a basic level it's best to know before you go for the real build. This guitar is my monster, I call it frank. I chop it change it tinker with it.

For instance.. Now I know that if I try this in a future refined build I need to use tuners with a higher gear ratio as the slightest turn changes the pitch wildly (might also need different string type/size) and these would work better if each sting has its own support instead of one piece of wood (the high tension and change in note from very slight movements mean any very slight change in pressure on the wood from the other strings knocks the refinement out). They also need their own sound board too. But.. It works! They pick up the harmonics of the played notes and make a drone similar to.. Umm.. I dont know :) and this drone changes depending on the harmonics of the notes that you play. Best for fingerpicking and slide not so good for strumming. This type of knowledge can't come from the drawing board.

It's worth it though.. People play it and you can see the puzzled look on their faces as they think "wtf is going on here?"

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Discussion Forum

Adjustable CBG bridge

Started by Jeff Box. Last reply by Ben Ridgeway Feb 3, 2018. 2 Replies

Soundhole sizing and design

Started by Habanera Hal. Last reply by Mark Taylor Dec 1, 2017. 23 Replies

Adjustable sound holes

Started by Jeff Box. Last reply by Jeff Box Sep 10, 2017. 5 Replies

Just intonation/scale

Started by Fomhorach. Last reply by Mike Jun 17, 2017. 4 Replies

Classical ball end strings

Started by John Hopper. Last reply by Moritz Voegeli Feb 24, 2017. 1 Reply

Truss rods

Started by Fomhorach. Last reply by Fomhorach Jun 16, 2016. 7 Replies

Measuring wood ( and/or box) resonances - cheaply

Started by Darren Addy. Last reply by Ron "Oily" Sprague Jun 14, 2016. 7 Replies

An idea that I haven't seen - any thoughts?

Started by Habanera Hal. Last reply by Fomhorach May 5, 2016. 12 Replies

A brand new resonator

Started by Mario Poggio. Last reply by Philip Hale May 5, 2016. 9 Replies

Signing your work

Started by Chuck Dubman. Last reply by G.S. Monroe Dec 21, 2015. 17 Replies

Braces and bars.

Started by Brian Lemin. Last reply by Monterey Mar 20, 2015. 8 Replies

Nonadjustable truss rod

Started by Scott W. Last reply by Scott W Jul 17, 2014. 9 Replies

Builders tricks

Started by Lee Martin. Last reply by Wichita Sam Apr 3, 2014. 4 Replies

Making a brass tailpiece

Started by Tim Mac. Last reply by Better Trees Jan 16, 2014. 3 Replies

Resonator cone and coverplate

Started by Keith Weser. Last reply by Mario Poggio Nov 30, 2013. 9 Replies

Neck dovetail

Started by Jillian Holladay. Last reply by Jillian Holladay Jul 23, 2013. 12 Replies

Neck Angle

Started by Wayne Bigler. Last reply by Wayne Bigler Jul 12, 2013. 5 Replies

"Testing" a box for bridge placement

Started by Roadkill a.k.a. John Maw. Last reply by Mark Bliss Jul 11, 2013. 163 Replies

Bridge attachment comparison.

Started by MichaelS Country Boy Guitars. Last reply by StarrCBGs(Donovan) Jul 10, 2013. 19 Replies

fret board material

Started by Sam Fontenot. Last reply by StarrCBGs(Donovan) Jul 10, 2013. 17 Replies

Blog Posts

Getting ready for next build

Posted by Sean Murphy on July 17, 2019 at 12:54pm 3 Comments

What wood is this?

Posted by Sean Murphy on July 16, 2019 at 10:48am 7 Comments

apology

Posted by Danny Gordon on July 13, 2019 at 7:30pm 3 Comments

Latest Activity

Will "KOOL DOG HOOCH" Bonner left a comment for Gallo Arbusto
"I would like to welcome you into the asylum. You will find valuable resources, tips and secrets…"
14 minutes ago
Will "KOOL DOG HOOCH" Bonner left a comment for Jane Padfield
"I would like to welcome you into the asylum. You will find valuable resources, tips and secrets…"
15 minutes ago
Andries D. EKER commented on Andries D. EKER's video
Thumbnail

AppleKnockers FlopHouse 1 a Tribute A. D. Eker 2019

"thank you Nancy! your a Class Cat yourself ! great pic ! glad you liked it ! my appriciation!"
15 minutes ago
Will "KOOL DOG HOOCH" Bonner left a comment for Peter Lewon
"I would like to welcome you into the asylum. You will find valuable resources, tips and secrets…"
16 minutes ago
Will "KOOL DOG HOOCH" Bonner left a comment for Lee Shelton
"I would like to welcome you into the asylum. You will find valuable resources, tips and secrets…"
17 minutes ago
Will "KOOL DOG HOOCH" Bonner left a comment for Rich Forestall
"Hi neighbor, I would like to welcome you into the asylum. You will find valuable resources, tips…"
18 minutes ago
Will "KOOL DOG HOOCH" Bonner left a comment for Wayne Secrest
"I would like to welcome you into the asylum. You will find valuable resources, tips and secrets…"
19 minutes ago
Will "KOOL DOG HOOCH" Bonner left a comment for Myron Joe Hickel
"I would like to welcome you into the asylum. You will find valuable resources, tips and secrets…"
20 minutes ago
Clint Spotts posted photos
20 minutes ago
Will "KOOL DOG HOOCH" Bonner left a comment for Phil Stickings
"I would like to welcome you into the asylum. You will find valuable resources, tips and secrets…"
21 minutes ago
Hollis Fenn commented on Hollis Fenn's video
Thumbnail

Gatton Two piece license plate box

"I will post part two where I play it electric later. It has two 27mm piezo discs wired parallel…"
40 minutes ago
Hollis Fenn posted a video

Gatton Two piece license plate box

Part one of the Dave Gatton License plate box guitar. This is the acoustic demo. Part two will be the electric demo. http://www.davegatton.com/guitars-for......
43 minutes ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->