John suggested I post this jig in "Special Tools" so here it is. Its just two pieces of wood joined by two hinges (?) and two brackets* to hold the Dremel. The cut off whell is a diamond coated 1.5" one. The bottle rests between two pieces of metal glued to the wood and the clamp at the right hand side holds everything on the table and functions as an end stop for the bottle, sort of.

I thought it helps to wrap cellotape around the bottle neck to prevent from too much chipping but it is still necessary to take lots of time and dont rush it - I need about 5 minutes for one cut - turning the bottle all the time and taking it very slowly with some nice laidback music in the background. If I press down too hard little pieces of glass are coming off which results in awful lot of grinding afterwards.

*can be found in hardware stores, used to fix water pipes onto walls

Views: 2080

Replies to This Discussion

Super, thanks.  Anyone have a jig for cutting them on a small tile saw?

Jan:

This is a fantastic idea!  Thank you for sharing it, and I hope you don't mind me sharing it on a post on my site (with credit given to you, of course)?

Jess Allred ---- http://totalrojoguitars.blogspot.com/

Jess, no probs, I'll be honoured! :-)

I'm not being critical of your jig, I'm just having trouble visualizing how it works.

Are the clamps attached to the shorter hinged board to rotate the dremel into the bottle?  It looks like the ears of the clamps would jam on the longer board.

Is it necessary to use the metal angle bar or can wood be used to hold the bottle.

I like the idea of it all.  Thanks for sharing.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Fret Jig

Started by Scott Schoepf. Last reply by Gary Stenzel Mar 2, 2017. 2 Replies

I Was Going "Nuts"....!

Started by Slowpaw Steve T. Last reply by Gary Stenzel Feb 21, 2017. 6 Replies

box bracing

Started by Wichita Sam. Last reply by Gipson Fat Fingers Shoemaker Jan 24, 2016. 4 Replies

Diamond core drill bit for fret dots etc

Started by Titch the Clown. Last reply by Gipson Fat Fingers Shoemaker Jan 24, 2016. 4 Replies

Special Tools

Started by Gary Ross. Last reply by gary sheldon Mar 19, 2015. 1 Reply

indispensable..

Started by Seasick Mick. Last reply by gary sheldon Jun 3, 2014. 10 Replies

Power string winding bit

Started by Titch the Clown. Last reply by Thomas "Duck" Petry May 10, 2014. 2 Replies

Raised Work Table

Started by David McQueen. Last reply by Thomas "Duck" Petry Apr 28, 2014. 3 Replies

Top Gluing Frame

Started by David McQueen. Last reply by David McQueen Apr 28, 2014. 2 Replies

Home made drill press

Started by Jimbo Cawthron. Last reply by Mike Strehlow Oct 21, 2013. 6 Replies

Wine bottle cutting jig

Started by Jan Westphal. Last reply by Mike Strehlow Oct 20, 2013. 4 Replies

Benchtop guitar clamp

Started by Mike Strehlow. Last reply by stringybark Oct 19, 2013. 1 Reply

Cutting Fret Slots on a Bandsaw?

Started by Habanera Hal. Last reply by Lou "cubancigar2000" Feb 25, 2013. 6 Replies

Hot hide glue pot and storage

Started by Charlotte Henry. Last reply by David McQueen Feb 10, 2013. 3 Replies

Spoke Shave

Started by Bluesheart. Last reply by jabes Jan 2, 2013. 5 Replies

tiny tools

Started by Bluesheart. Last reply by Habanera Hal Aug 19, 2012. 2 Replies

Homemade fret-end beveling file

Started by Turkeychicken. Last reply by PhilUSAFRet Mar 29, 2012. 2 Replies

Anyone use the stewmac dragon rasp?

Started by Charlotte Henry. Last reply by Charlotte Henry Mar 11, 2012. 31 Replies

Rotary Rasps

Started by PhilUSAFRet Mar 8, 2012. 0 Replies

Latest Activity

BrianQ. liked Gary O'slide's video
4 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Flathead Diddley Bow

"Thanks. Wow! That becomes a spendy box Alan. They are pretty distinctive though. I have a few on…"
8 hours ago
Nigel McTrustry posted a video

Nigel McTrustry & The Hound Dogs are Loose! - Yellow Dog - Live - Original - Cigar Box Guitar

Nigel McTrustry & The Hound Dogs are Loose! Yellow Dog (McTrustry)@ The Cave Inn Brisbane, Australia.The song is currently on Spotify.
8 hours ago
AGP # commented on Doug Thorsvik's photo
Thumbnail

Flathead Diddley Bow

""Sweet Doug" :-), have seen quite a few Flathead Builds over the years, great looking…"
10 hours ago
AGP # liked David Dodt's photo
10 hours ago
AGP # liked David Dodt's photo
10 hours ago
AGP # liked David Dodt's photo
10 hours ago
AGP # liked Doug Thorsvik's photo
10 hours ago
AGP # liked Doug Thorsvik's photo
10 hours ago
AGP # liked Doug Thorsvik's photo
10 hours ago
AGP # liked Aaron Green's photo
10 hours ago
Keith Rearick liked Gary O'slide's video
12 hours ago

Events

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->