Hand built and custom microphones

Information

Hand built and custom microphones

thought about how i was using modern mics and effects, mainly distortion and reverb, to record with and it seemed the next step to me was hand built microphones to record with - 

 

Members: 82
Latest Activity: Oct 23

a few of my first mic builds

#3 / coffee can mic with suspension mount - using a 2 x 3 1/2 inch speaker as the "mic"#2 / bud light "tall boy"" beer can mic with standard mount - using a 20mm piezo as the "mic"#1 / milwaukee's best beer can mic with standard mount - using a 1 1/4 inch headphone speaker as the "mic"videos & or sound samples are on my page if you wanna check out how they sound

Discussion Forum

Homemade Microphone - Housing

Started by Randy S. Bretz. Last reply by Kevin Keating Oct 23. 4 Replies

What do most use for the mic housing, i`ve seen everything from phones, wood and cans. I use bone only because i have an unlimited amount and it`s already hollowed out. Plus it makes a killer lookin…Continue

Old Telephone Bullet Mic

Started by Brian Revels. Last reply by Blind Lemon Cello May 13, 2016. 1 Reply

Hey Guys,I know there hasn't been a lot happening in this group, but hopefully someone will chime in to answer my question...I have this old phone receiver and want to make a couple of harmonica…Continue

Elements

Started by Randy S. Bretz. Last reply by PKB Oct 25, 2013. 3 Replies

Thought i would start this discussion on the different tyope of elements that can be used in a harp mic. My first one [ one so far ] i used an old rotary telephone element. Rather large at 2" round…Continue

Harmonica Mics...

Started by Isaac. Last reply by Randy S. Bretz Sep 23, 2012. 9 Replies

Hi all! I build harp mics for fun and, occasionally, to do a bit of bartering/trading with folks for other gear. Some time ago, I wrote an instructable on how to make a fully DIY bullet mic. Check it…Continue

Comment Wall

Comment

You need to be a member of Hand built and custom microphones to add comments!

Comment by BrianQ. on October 22, 2019 at 11:32am

Kool, I’ve scavenged my fair share of those for their elements, once in awhile you’ll get lucky & end up with a crystal element. Japanese branded ones from the 60’s run pretty hot for a dynamic element?

Comment by Blind Lemon Cello on October 22, 2019 at 9:13am

Very cool!

Comment by Kevin Keating on October 22, 2019 at 5:48am

It ain't pretty but it works.  It's an old General Electric CB radio mic out of an old school bus.  I disabled the switch.  It has a cool distorted loudspeaker sound to it.

Comment by BrianQ. on October 3, 2019 at 2:55pm

Found a cache of cans & jar lids, Xmas is coming up roses this year! Piezo mic’s & Canjo’s for all!! Gifting this handmade hoard is equally rewarding as it is building it. Especially if they’re people whom you love & admire :) happy building Ladies n Gents......

Comment by Blind Lemon Cello on November 21, 2017 at 4:48pm

Thanks Paul! Still fine tuning it, hoping to get a Hollybelly vocal vibe.

Comment by Paul Craig on November 21, 2017 at 3:05pm

That's really nice and I bet it sounds great.

Comment by Blind Lemon Cello on November 21, 2017 at 9:50am

Canjo Mic, 1950's telephone 48v mouthpiece.

Comment by Darwin Gentry on October 2, 2017 at 3:19pm
https://youtu.be/BSwtDsYQ-CY
It's a little old but thought I would share
Comment by Brian Revels on September 11, 2015 at 10:46am

Bobby Fields It would probably be best to click the button to 'Add a Discussion' and re-post your question.  This would be better and easier for people to reply with some good info.  Also, it would allow you to post a picture of what you're trying to work with.  I think the fact it has a board you need power, but won't know til I see it. 

Comment by Bobby Fields on September 3, 2015 at 7:59pm

I just joined up and I have a lot of questions. I just tore up an old vidieo tape machine.It had a condenser mike on the side so I saved those parts,There was a little board on the inside  that was attached and I save that two.Any hints on how to make this useable? Must i have power to make it work?

Thanks

played15 

 

Members (82)

 
 
 

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Discussion Forum

Homemade Microphone - Housing

Started by Randy S. Bretz. Last reply by Kevin Keating Oct 23. 4 Replies

Old Telephone Bullet Mic

Started by Brian Revels. Last reply by Blind Lemon Cello May 13, 2016. 1 Reply

Elements

Started by Randy S. Bretz. Last reply by PKB Oct 25, 2013. 3 Replies

Harmonica Mics...

Started by Isaac. Last reply by Randy S. Bretz Sep 23, 2012. 9 Replies

Adding Componets

Started by Randy S. Bretz. Last reply by Randy S. Bretz Sep 2, 2012. 1 Reply

Latest Activity

Dennis "Denbo" Goodinson liked Dave Lynas's video
16 minutes ago
Dennis "Denbo" Goodinson liked Francis Camillo's photo
31 minutes ago
Miku commented on Miku's photo
Thumbnail

Miku 4 Amped

"Thank you all."
31 minutes ago
Miku commented on Miku's photo
Thumbnail

Miku 4 Amped

"Thank you. No it is not compensated nut"
32 minutes ago
Cause the Blue rat replied to Kevin Keating's discussion Cases for CBG's
"For the cost I can buy a used guitar case. I look for ones without formed interiors. By the time I…"
2 hours ago
BrianQ. replied to Kevin Keating's discussion Cases for CBG's
"Big 5 sells those, as does Walmart, but beware, some are flimsy, I have used a few good rifle…"
2 hours ago
Cause the Blue rat replied to Kevin Keating's discussion Cases for CBG's
"gig bags are like asking for trouble. "
2 hours ago
PauL commented on PauL's video
Thumbnail

⭐My New "4 Strings" CBG !!! ⭐

"Thank yoiu Dave Lynas!!! The song is my "Opus #13 from my LP "Fairy desire"…"
2 hours ago
PauL commented on PauL's video
Thumbnail

⭐My New "4 Strings" CBG !!! ⭐

"Thanx Poorness Studios!!! Stay tuned...."
2 hours ago
AGP # commented on AGP #'s photo
Thumbnail

AGP #374 - ''Indiana''

""Thanks Bones", Yep!, have tuned the low G up to A on some of my other GDGB Gits, but…"
2 hours ago
PauL commented on PauL's video
Thumbnail

⭐FIVE STRINGS CBG !! ! The Pickwick Update ⭐

"Thanx to everyone that enjoyed the first video on this cbg. (Cannot thanx everyone personally cause…"
2 hours ago
PauL posted videos
2 hours ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->