Hey guys!

I'm fixin' to graduate from buying pre-wired harnesses to the big people's table and do my own soldering of parts--jack-to-volume-pot, pup-to-volume-pot, etc.--and I don't know what kinds of wire to get.  I see two colors often:  black and red.  But I don't know what breed of cat they are, or gauge, etc.

I just talked to my guitar guy, who has wired up parts for me in the past.  He said he uses "shielded wire".  I asked where he gets it.  He said, "Good question."  He said maybe an old guitar cable.  Well, I've got some of that, and even some old speaker wire.  He said he takes off the insulation, and inside there's an insulated wire--positive--and a bare wire--negative.  That's what he uses.

What do y'all think?

Views: 181

Replies to This Discussion

Long wires tend to pick up noise. The best wire is shielded, but isn't always necessary. I have had great success using twisted pair wire salvaged from Ethernet (computer) cables.

I buy wire from the big box store . labeled,  Cerrowire 22-2 sound and security cable shielded . I cut it into 9 inch lengths and pull out the red and black wires, I use the red for hot the black for ground. you can buy it buy the foot or the 500 foot roll.

Shielded cable is readily available, they just tell you things like that because they don’t want you doing your own work. In fact it’s become very economical these days. 

https://www.ebay.com/p/Gavitt-Guitar-Wire-22awg-W-Vintage-2-strand-...

Guitar cables can be used but it’s not so good in tight cavities, but I’m sure if you’re using it in a cigar box you won’t have that problem.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Discussion Forum

Building my first CBG....

Started by James Pobog. Last reply by James Pobog 16 hours ago. 6 Replies

About neck thru....

Started by James Pobog. Last reply by John Mark Perchalski 18 hours ago. 1 Reply

Soldering/grounding plan

Started by T-Gripped. Last reply by Gus K on Monday. 6 Replies

Fitting Frets

Started by neddy. Last reply by Taffy Evans Nov 27. 8 Replies

Joinery suggestions for hand-made boxes

Started by Chris Wharton. Last reply by MadGomer Nov 23. 43 Replies

Fretted....

Started by Jim Codog. Last reply by Jim Codog Nov 20. 5 Replies

Connecting a guitar jack?

Started by rick schoen. Last reply by David Clewell Nov 17. 5 Replies

Fretting for beginners

Started by Michael Myers. Last reply by MadGomer Nov 14. 3 Replies

Adjusting the action on a cbg 3 string.

Started by rick schoen. Last reply by Tim Pannabecker Nov 11. 8 Replies

Tuner and nut question.

Started by Bill. Last reply by Gus K Nov 6. 12 Replies

Help with first tuning procedure.

Started by James Pobog. Last reply by Mark Bliss Nov 6. 3 Replies

Too far gone??

Started by T-Gripped. Last reply by Mark Bliss Nov 6. 7 Replies

Pickup query

Started by Arthur Payne. Last reply by Arthur Payne Nov 6. 11 Replies

How do I use this string tension calculator?

Started by Warren Williams. Last reply by BrianQ. Nov 4. 3 Replies

How could this be?

Started by stephen davies. Last reply by stephen davies Oct 28. 5 Replies

Is EBE tuning more tension or less?

Started by Warren Williams. Last reply by Warren Williams Oct 24. 4 Replies

Rough scarf joint seam

Started by Michael shrader. Last reply by Michael shrader Oct 23. 5 Replies

Fret sizes.

Started by neddy. Last reply by neddy Oct 18. 13 Replies

Blog Posts

Mag pickup help

Posted by Fantacone Box Works on December 1, 2019 at 7:26pm 5 Comments

Tupelo Tenor kit

Posted by Craig W.Solomon on November 21, 2019 at 6:51pm 4 Comments

Hello from new member

Posted by Morgan L. Scoggins on November 16, 2019 at 9:52am 8 Comments

Latest Activity

Uncle John commented on Bill Turner (Wunkyman)'s photo
Thumbnail

Skullduggery

"Love your art and imagination, Bill."
54 minutes ago
Gus K liked James Pobog's discussion Lap steel build for grandson...
55 minutes ago
Uncle John commented on Dave Lynas's photo
Thumbnail

neck slot and bracing finished

"Gonna produce some voluminous volume, Victor!"
56 minutes ago
Uncle John commented on Daniel Walter's photo
Thumbnail

Bow guitar with original bridge,,,,

"Or maybe an art show.   Great."
58 minutes ago
Uncle John commented on Daniel Walter's photo
Thumbnail

Bow guitar with original bridge,,,,

"You deserve to be featured artist at some big art shoe."
59 minutes ago
Uncle John commented on Vern Hallett's photo
Thumbnail

HF - 3

"Nice use of zero grey and string guides. You are a Gooding luthier."
1 hour ago
Uncle John commented on Downtown Vinnie's video
1 hour ago
Uncle John commented on Poorness Studios's video
Thumbnail

Quick Demo of the Pizza Paddle

"That thang is a total winner.   You play it well, too.  That looks like a Gitty bass…"
1 hour ago
Profile IconChris DiStasio, BeanJean, Bugre and 2 more joined Cigar Box Nation
1 hour ago
Uncle John commented on BUGGY (C)'s video
Thumbnail

My what's cooking

"I like your poertry, Bug!"
1 hour ago
KOOL DOG HOOCH replied to Taffy Evans's discussion Resonator guitar build....the Journey
"Thanks Taff. Pretty much what I've been doing. My fretsaw has a .018 wide kerf, been using a…"
1 hour ago
Jerry Jordan commented on Termoking's photo
Thumbnail

Valley City 1935

"Interesting.,"
2 hours ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->