Working on my 19th cbg build. However, this is just my second build using two pick-ups, 3-way switch w/tone & volume. My first two pick-up build was a humbucker and a piezo. Using a wiring diagram supplied to me by Del Puckett, a well-known and expert cbg builder, I was able to wire this guitar with no problems.

This second build however, has been a son of a beech tree. I used two matching chrome mini-humbuckers from cbgitty for this build and the wiring diagram from the first build. After finishing the wiring, I found everything worked except the volume is on whether the tone knob is turned on or all the way off.

When I click the 3-way switch, I do get sound just from the desired pick-up and no sound from the pick-up not selected. So the volume is not just hard-wired somehow to be on all the time.

At any rate, I double-checked my solder joints, double-checked my wiring diagram to make sure I had everything wired correctly. Couldn't really find anything wrong, and since everything else seemed to be working as expected, I assumed I had a problem with a cold joint somewhere and pulled and re-soldered about half of the wiring, especially all the connections having anything to do with the Volume pot.

After many hours of re-soldering and re-checking every bit of my wiring, I still have volume when the Volume pot is turned all the way down. Nothing I've done has changed the situation. I'm sure this is an issue at least a few other builders have been confronted with, but I haven't been able to find much on this.

Anybody here know what I've done wrong, or what I'm missing when I'm troubleshooting this? Any help would be much appreciated. Getting to the point where I'm about ready to turn this build from potential sales merchandise into firewood!

Views: 79

Replies are closed for this discussion.

Replies to This Discussion

You need to check the volume pot with an ohm meter, by connecting to the correct 2 leads and turn the control knob back & forth. i.e. 10K pot if it doesn't change pot NG.

Thanks for the tip! Sounds foolproof. All I need to do is buy an ohm meter. Will do that ASAP.

Could you post a copy of the wiring diagram, please? 

Trying but the site doesn't seem to want to download the file.

That's OK, I'll wait.

Hey, the diagram gpeg wouldn't download, so here's the link to the video where the wiring diagram I used is shown. The video shows the actual wiring, the diagram is at the end, starting at 4:20.

https://youtu.be/eBP-4shteCo

You say the volume is on when you turn the tone knob... The tone knob isn't supposed to affect the volume... Just making sure....

No didn't mean to give the impression I was talking about the tone knob. Strictly talking about having volume even with the volume knob turned all the way off. Tone control seems to be working fine, as is everything else.

Just read my original post and saw I said tone knob. DUH. Don't know how that popped out of my brain. Too long ago to edit, but anyway just the volume pot.

To the two or three folks who offered any kind of response to my post for help, I replaced the volume pot with a new one and still had the same issue ~ volume is on at same level no matter what you do with the volume knob.

I was sure somebody here would know what was wrong and have the solution. Pretty disappointed to find this place is basically an empty forum. No worries. I'll figure it out on my own. 

RSS

The Essential Pages

New to Cigar Box Nation?How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

 

Recommended Links & Resources

Discussion Forum

Wooden bridges for CBG

Started by Lou Ellis. Last reply by Lou Ellis Jan 14. 3 Replies

Volume Is On When Knob Is Turned Off

Started by Steve Allen. Last reply by Steve Allen Jan 13. 9 Replies

Hard- tail bridge question

Started by Arthur Payne. Last reply by Arthur Payne Jan 6. 4 Replies

Adjustable bridge problem

Started by Arthur Payne. Last reply by BrianQ. Dec 12, 2018. 6 Replies

Bloomin' wiring again! Pulling my hair out haha

Started by Slow Blues Dani & Ol' Grey Bear. Last reply by Slow Blues Dani & Ol' Grey Bear Dec 10, 2018. 14 Replies

Build 4 - buzz from inside body?

Started by Sean Murphy. Last reply by Sean Murphy Dec 1, 2018. 5 Replies

Mini Humbucker wiring

Started by Arthur Payne. Last reply by BrianQ. Nov 22, 2018. 1 Reply

Power tools - what buy next?

Started by Charles Z. Last reply by Charles Z Nov 10, 2018. 3 Replies

Separate fretboard vs. fretted neck?

Started by Sean Murphy. Last reply by Joe Caruso Nov 3, 2018. 2 Replies

Canoe Paddle Questions

Started by T-Gripped. Last reply by BrianQ. Nov 2, 2018. 2 Replies

Bass Tuning Machine Layout Information

Started by Dean-O Rochester Oct 30, 2018. 0 Replies

Strings snapping on new build

Started by Arthur Payne. Last reply by Gerald Schwenke Oct 26, 2018. 8 Replies

Hard tail bridge saddle screws

Started by Walter Haapapuro. Last reply by Thomas "Duck" Petry Oct 24, 2018. 3 Replies

Space between Box top and Neck?

Started by Arthur Payne. Last reply by Tomasz Oct 22, 2018. 10 Replies

Power tools - what buy next?

Started by Charles Z. Last reply by Ben Ridgeway Oct 7, 2018. 3 Replies

fret wire and fret saw thickness

Started by Kurt Oravetz. Last reply by Kurt Oravetz Oct 7, 2018. 6 Replies

What kind of wire?

Started by Andy Busch. Last reply by BrianQ. Sep 9, 2018. 3 Replies

looking for sound hole advice

Started by Brendt Evenden. Last reply by Brendt Evenden Sep 7, 2018. 4 Replies

strings in bulk

Started by Seth Deitch. Last reply by BrianQ. Aug 19, 2018. 1 Reply

Double up strings

Started by larry kraus. Last reply by Brown Water Jerry (Rice) Aug 6, 2018. 1 Reply

Latest Activity

shane wagstaff commented on ChickenboneJohn's video
Thumbnail

Mini-amp shootout - TomsLine Engineering vs Roland MicroCube

"In my opinion the Toms line has a lot more bottom end than the Roland and this is one thing that…"
18 minutes ago
Tim Pannabecker left a comment for Jeff 'Bones' Reilly
"Hey Jeff How is this for an offset   I’m really wondering how this will sound im calling…"
22 minutes ago
shane wagstaff commented on Jason Mills's video
28 minutes ago
shane wagstaff commented on Clarky's video
29 minutes ago
BrianQ. liked Randy S. Bretz's photo
1 hour ago
Randy S. Bretz posted photos
1 hour ago
Uncle John commented on Uncle John's video
Thumbnail

Cali Fest ~ Hank Williams Open Mic sign up

"Clarky, you might be pleasantly surprised.  Lots of it on youtube.   I think you…"
1 hour ago
Uncle John commented on Clarky's video
Thumbnail

Big Green and Yeller - Seasick Steve - Cigar Box Guitar Cover

"I like the heck out of this one.  SS and your playing.  That long stay on the same good…"
1 hour ago
Clarky commented on Uncle John's video
Thumbnail

Cali Fest ~ Hank Williams Open Mic sign up

"Nice job Uncle J, I have to confess to knowing virtually no Hank Williams (sorry everyone). …"
1 hour ago
Clarky commented on Jason Mills's video
Thumbnail

Pantera on Three String Guitar

"I don't know Pantera really but impressive playing."
1 hour ago
Clarky posted a video

Big Green and Yeller - Seasick Steve - Cigar Box Guitar Cover

Welcome to my channel! I make cigar box guitars and play non-traditional songs on them. Anything from AC/DC to Motorhead or Nirvana to ...erm.. Ze Smashing P...
1 hour ago
Tim Pannabecker commented on Laurie Lee Campbell's group CBG in CALIFORNIA
"Im new to this community.  I love blues, 3 string cbg and was wondering if there are any…"
2 hours ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://api.ning.com/files/Stym6V-ACBaiDP5ilIPA6bJ3rn0ZdlI1EwGHWgROvEkwiCCaNgzJRcZTZH8OGkV3fvK-NboXjThXltWFbcihM-jI4Mwz5SV3/scrollup_icon.png") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->