Working on my 19th cbg build. However, this is just my second build using two pick-ups, 3-way switch w/tone & volume. My first two pick-up build was a humbucker and a piezo. Using a wiring diagram supplied to me by Del Puckett, a well-known and expert cbg builder, I was able to wire this guitar with no problems.

This second build however, has been a son of a beech tree. I used two matching chrome mini-humbuckers from cbgitty for this build and the wiring diagram from the first build. After finishing the wiring, I found everything worked except the volume is on whether the tone knob is turned on or all the way off.

When I click the 3-way switch, I do get sound just from the desired pick-up and no sound from the pick-up not selected. So the volume is not just hard-wired somehow to be on all the time.

At any rate, I double-checked my solder joints, double-checked my wiring diagram to make sure I had everything wired correctly. Couldn't really find anything wrong, and since everything else seemed to be working as expected, I assumed I had a problem with a cold joint somewhere and pulled and re-soldered about half of the wiring, especially all the connections having anything to do with the Volume pot.

After many hours of re-soldering and re-checking every bit of my wiring, I still have volume when the Volume pot is turned all the way down. Nothing I've done has changed the situation. I'm sure this is an issue at least a few other builders have been confronted with, but I haven't been able to find much on this.

Anybody here know what I've done wrong, or what I'm missing when I'm troubleshooting this? Any help would be much appreciated. Getting to the point where I'm about ready to turn this build from potential sales merchandise into firewood!

Views: 107

Replies are closed for this discussion.

Replies to This Discussion

You need to check the volume pot with an ohm meter, by connecting to the correct 2 leads and turn the control knob back & forth. i.e. 10K pot if it doesn't change pot NG.

Thanks for the tip! Sounds foolproof. All I need to do is buy an ohm meter. Will do that ASAP.

Could you post a copy of the wiring diagram, please? 

Trying but the site doesn't seem to want to download the file.

That's OK, I'll wait.

Hey, the diagram gpeg wouldn't download, so here's the link to the video where the wiring diagram I used is shown. The video shows the actual wiring, the diagram is at the end, starting at 4:20.

https://youtu.be/eBP-4shteCo

You say the volume is on when you turn the tone knob... The tone knob isn't supposed to affect the volume... Just making sure....

No didn't mean to give the impression I was talking about the tone knob. Strictly talking about having volume even with the volume knob turned all the way off. Tone control seems to be working fine, as is everything else.

Just read my original post and saw I said tone knob. DUH. Don't know how that popped out of my brain. Too long ago to edit, but anyway just the volume pot.

To the two or three folks who offered any kind of response to my post for help, I replaced the volume pot with a new one and still had the same issue ~ volume is on at same level no matter what you do with the volume knob.

I was sure somebody here would know what was wrong and have the solution. Pretty disappointed to find this place is basically an empty forum. No worries. I'll figure it out on my own. 

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Discussion Forum

Earthing Strings

Started by mitch jones. Last reply by mitch jones yesterday. 7 Replies

CBGitty Amp kit

Started by Art Prior. Last reply by Tim Pannabecker yesterday. 2 Replies

Like a box of chocolates

Started by Michael shrader. Last reply by Michael shrader May 11. 3 Replies

Intonation problem

Started by Ramson. Last reply by Will "KOOL DOG HOOCH" Bonner May 3. 14 Replies

Pure and simple CBG

Started by Bill McNamara. Last reply by Craig Cole Apr 30. 6 Replies

Springs in an acoustic cbg

Started by Will "KOOL DOG HOOCH" Bonner. Last reply by Paul Craig Apr 30. 6 Replies

Scale length for 17" box

Started by Will "KOOL DOG HOOCH" Bonner. Last reply by Dennis "Denbo" Goodinson Apr 30. 29 Replies

Pickup to string distance

Started by Lou Ellis. Last reply by Lou Ellis Apr 9. 8 Replies

What strings should be used for 4 string cbc tuned to GDGD?

Started by Will "KOOL DOG HOOCH" Bonner. Last reply by Paul Craig Apr 8. 3 Replies

Bonehead rookie mistake

Started by Michael shrader. Last reply by Will "KOOL DOG HOOCH" Bonner Apr 7. 24 Replies

Neck, sound hole, strings and Bridge question.

Started by Will "KOOL DOG HOOCH" Bonner. Last reply by Will "KOOL DOG HOOCH" Bonner Apr 4. 9 Replies

Power tools - what buy next?

Started by Charles Z. Last reply by John Sawyer Apr 4. 6 Replies

Fretboard radius, is it to late?

Started by Ramson. Last reply by Ramson Mar 26. 7 Replies

Help

Started by Pat Welch. Last reply by Tim Pannabecker Feb 26. 7 Replies

Hard- tail bridge question

Started by Arthur Payne. Last reply by Tim Pannabecker Feb 26. 7 Replies

Space between Box top and Neck?

Started by Arthur Payne. Last reply by Tim Pannabecker Feb 25. 11 Replies

Tuning ptoblem

Started by Arthur Payne. Last reply by Arthur Payne Feb 14. 14 Replies

Wooden bridges for CBG

Started by Lou Ellis. Last reply by Lou Ellis Feb 13. 5 Replies

Blog Posts

Latest build

Posted by Sean Murphy on May 8, 2019 at 9:03pm 4 Comments

Netherlands Tour

Posted by Dar Stellabotta on May 8, 2019 at 5:33pm 0 Comments

Sunday canjo fun

Posted by Sean Murphy on April 21, 2019 at 5:26pm 2 Comments

Finding Xanadu in Memphis

Posted by Poorness Studios on April 13, 2019 at 6:00pm 5 Comments

Latest Activity

Don Craig liked High Bird Handcrafted Instuments's photo
20 minutes ago
Don Craig liked High Bird Handcrafted Instuments's photo
20 minutes ago
Don Craig liked High Bird Handcrafted Instuments's photo
21 minutes ago
Don Craig liked High Bird Handcrafted Instuments's photo
21 minutes ago
Andries D. EKER posted a photo
24 minutes ago
Casey Baron commented on Casey Baron's video
Thumbnail

C.Baron 6 String Cigar Box Guitar Demo

"Thanks! The cigar box is filled with a solid poplar core, making it a solid body."
33 minutes ago
Andries D. EKER commented on Uncle John's video
Thumbnail

U R My Sunshine ~ at a bit faster pace

"like i say's on the Tube ! You are the Sunschine ,and spot on whit  the do it yourself…"
35 minutes ago
Uncle John commented on Uncle John's photo
Thumbnail

Oggy

"Thanks guys. I agree"
38 minutes ago
Uncle John commented on Uncle John's photo
Thumbnail

Hobo Fiddle ~ 3 string

"LOL, Alan and Dave. I am NOT allowed matches, but I have a small stash."
39 minutes ago
Uncle John commented on Uncle John's photo
Thumbnail

Hobo Fiddle ~ 3 string

"Thanks guys. It is an Emerson cigar box. I removed the top and raised and angled the new top to (in…"
40 minutes ago
Andries D. EKER commented on Downtown Vinnie's video
Thumbnail

Earth Breaker Soul Shaker

"Dog comes running in the Yard Sits down looks and takes a dunk Me looking, agrevated giving a…"
42 minutes ago
the anonymous pick commented on AGP #'s photo
46 minutes ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->