I decided I was going to build one of these after seeing a video on youtube(www.youtube.com/watch?v=0qFxXhg6zwA) of a electric one, but you can also build an acoustic one too.
What is a Tres Cubano you may ask?
It's a short scale(23" to 24") 6 string guitar that has the strings paired into 3 groups of 2. They use small gauge strings and pair the D string with high E, then 2 B strings and then a G string with high E and tune it gG-cC-dD(lower case is octave higher)like half of a 12 string guitar.
They are often used in Salsa music.
I got a couple short scale Strat type guitars for kids, but they were trashed. So I decided it would be better to build one out of a Cuban Cigar Box since my cousin gave me 4 Cohiba boxes.

Views: 64

Replies to This Discussion


My box after layout of the 3 Gitty Lipstick Tube Pickups. I modified the middle pickup to be RWRP for noise cancellation in the combo positions. Using a 5-way switch,250k pots and .047 cap to start off with. May change the pot/cap values later after hearing it. I also have a gitty "rail runner" rod piezo bridge that I'm considering adding to the pickups. That may change later too.

I messed up the neck/headstock joint when I glued them together without a pin. It was clamped and in place, but moved later before the glue dried. I usually use a pin when gluing, but didn't because it looked like it was going to stay. Should have known better.
Titebond Original is what I use and it works great, had to use my Exacto saw blade to cut them apart. Then it was dry fit and clamp, pin, take apart and glue, realign and pin and clamp to set.

I glued a through piece in the box for the neck to bolt onto with spacers to support. Needed a 4mm spacer to allow the fretboard to go over the top of the box. Tried to cut one, but that ended in disaster. Found a extra paint stir stick left over from recent home painting, it was exactly 4mm thick. Wasn't wide enough so I cut 2 pieces and cut off the excess. I have some degree cut shims if I need them later for neck angle.

The box wood is very dry and cutting out the pickup holes resulted in some splinters around the edge and there's a couple of oops cuts around the edge from the saw, good thing Gitty sells pickup rings for these.
Here's a pic of the through piece and spacers in the box.


Wondering how well this piezo bridge is going to work with passive controls, never done it before, but there's enough room for a preamp if needed.
These pickup surround ring are great looking, guess someone forgot the pickup heigh adjustment screw holes.

That’s kool, Paul! An actual tres cubano is basically a spanish classical guitar with three sets of strings, so you’re right on using a box since it’s an acoustic instrument. I converted my classical for awhile back  in my teens, it’s really fun if you have a busy playing style. Ry colder went all the way to Cuba to learn & jam with famous tres cubano player Papi Oviedo, what a lucky guy!! Keep us posted!!

I'll keep posting it. Posting on the Friends of CBGitty too on FB.

This is kind of a mix between the modern and the classic with the electric involved and uses strings from 2 sets. I'm using 2 Southbound 4 string sets to make it.

Definitely different from the usual.

Is that a Rail runner bridge?

Yes it is. Haven't tried one yet, so I thought I'd give it a go.

Plugged the pin hole in the neck/headstock.

So the Gitty Lipstick Pickups come with the wrong pickup mounting screws. The base is made to mount to a box top or pickguard like a Strat. The holes in the base are threaded with a fine thread, which I found out to be 3mm x .50 and got the 20mm long for this application. The mounting screws supplied are too small for the base, coarse thread and too long( very much like the PBass pickup screws.

Anyway, I got the pickups mounted.

Got my headstock laid out. Ready to cut the trussrod channel and headstock design.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor


Recommended Links & Resources


Discussion Forum

Drawings or pictures on the box

Started by Martin. Last reply by Tim Arnsmeyer on Friday. 3 Replies

Tres Cubano Build

Started by Paul Craig. Last reply by Paul Craig Aug 28. 12 Replies

Hard metal bridges

Started by Michael Myers. Last reply by Taffy Evans Jul 29. 1 Reply

Getting the most sustain on a fretless CBG.

Started by Joe Plotts. Last reply by Taffy Evans Jun 30. 4 Replies

2nd Build Electronics Questions

Started by Steven Adler. Last reply by Steven Adler Apr 20. 4 Replies

yard sticks for fret boards

Started by Raymond L. Last reply by the anonymous pick Apr 17. 3 Replies

Where in the UK.

Started by Ian MCDONALD. Last reply by Lazylefteye Mar 28. 4 Replies

whaaaaaa?

Started by andrew payton-smith. Last reply by Taffy Evans Mar 7. 11 Replies

wiring a split coil mini humbucker

Started by Don Tucker. Last reply by Taffy Evans Mar 6. 2 Replies

Canjo tuning

Started by declan foley. Last reply by Taffy Evans Nov 23, 2020. 18 Replies

License Plates for LPGs

Started by T-Gripped. Last reply by Tim Pannabecker Nov 13, 2020. 6 Replies

Box style - acoustic or electric

Started by Warren McLennan. Last reply by Tim Pannabecker Aug 7, 2020. 13 Replies

Obvious overlooked error. Do I rebuild this neck?

Started by Michael shrader. Last reply by mitch jones Jun 5, 2020. 9 Replies

Neck is bowing

Started by Lou Ellis. Last reply by Paul Craig Apr 21, 2020. 10 Replies

Too far gone??

Started by T-Gripped. Last reply by BrianQ. Mar 30, 2020. 13 Replies

Finishing Fretboard

Started by Jeffrey Phillips. Last reply by Gus K Mar 4, 2020. 5 Replies

Yardstick Fretboards

Started by Jim Codog. Last reply by Gus K Feb 17, 2020. 9 Replies

Snake oil pick up install question

Started by Michael shrader. Last reply by Gus K Feb 17, 2020. 1 Reply

Walnut overload

Started by 3 Chord Ziggy. Last reply by 3 Chord Ziggy Feb 16, 2020. 21 Replies

Questions on a first time electric build.

Started by Michael shrader. Last reply by John Mark Perchalski Jan 27, 2020. 4 Replies

Blog Posts

Leonard Cohen Life

Posted by Keith Rearick on October 7, 2021 at 11:18am 0 Comments

CBGer’s Lament

Posted by Ghostbuttons on October 3, 2021 at 12:11am 0 Comments

Sasquatch!

Posted by Mark E. Martinsen on September 29, 2021 at 8:39pm 3 Comments

Prototyping with a big ol' wine box

Posted by Ben on September 23, 2021 at 4:00pm 0 Comments

Mr. Bells

Posted by Stephen Cohen on September 4, 2021 at 12:30pm 0 Comments

Latest Activity

Doug Thorsvik commented on Poorness Studios's video
Thumbnail

Big White Taxi (a tribute to Dave Lynas)

"A fitting tribute like only you can do Kale! Dave’s memory lives on."
2 hours ago
Richard Sundberg commented on Richard Sundberg's video
Thumbnail

Blues On and On. Dave Lynas and Richard Sundberg

"Thank you very much Buggsy! This is one of my favorites with Dave. We were talking about doing…"
2 hours ago
AGP # liked Darryl Tuttle's photo
3 hours ago
AGP # liked Darryl Tuttle's photo
3 hours ago
AGP # commented on Randy S. Bretz's video
Thumbnail

Four String Bone Crusher

""Deep & Dark" Randy, Sounds GR888888888888888888888888888!!!!! :-)"
3 hours ago
AGP # liked Randy S. Bretz's video
3 hours ago
AGP # liked Poorness Studios's video
3 hours ago
BUGGSY liked Darryl Tuttle's photo
3 hours ago
Uncle John commented on Darryl Tuttle's photo
Thumbnail

Dave Lynas mug

"Nice!   Cool you got to go there and pick out and purchase.  "
3 hours ago
Uncle John commented on Darryl Tuttle's photo
Thumbnail

Dave Lynas plate

"Aw, Daryl. What a nice plate and remembrance. Cool that you got your wife to pick it and now you…"
4 hours ago
Uncle John commented on Randy S. Bretz's photo
Thumbnail

Deadhead brass bridge

"That is just plain, my- tee fine."
4 hours ago
BUGGSY replied to ThePracticalPeasant's discussion Completed Builds
4 hours ago

Music

© 2021   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->