Hi All,

Just finished building my first CBG and pleased with the result until I tried to string it.   Used strings 2,3 and 4 from a set of Dunlop nickel wound electric.   These are 42,30 and 17 gauge respectively.   Used a digital tuner to tune to G,D,G.   The 2 string snapped as I reached the correct pitch (G).   As I had only the one set of strings on hand I decided to go with 3,4and 5 (13 gauge).   Got to G on the top string but it was quite dead so tried to take it up to A but it too snapped before it got there.

I can't believe it's a fault with the strings.

The neck is a "through-the-box" and the strings go through grommets in the tail stock so there's no issue there.  In both cases the break occurred at the machine head.

Most disappointing.   Was hoping to play it this weekend.

Any help/suggestions greatly appreciated

Views: 181

Replies to This Discussion

Morning, Arthur.

There can be several reasons for string breakage on new builds. I'll try and suggest a few then I'm sure others will be able to help some too.

Check the machine heads for burrs or sharper bits to make sure that's not why they're snapping at the machine heads.

Make sure your break angle over the nut and/or bridge isn't too severe. If it's too steep of an angle going over these then that can create similar issues.

Along with break angle, if you're building a slide guitar, make sure your string height above the neck or fretboard isn't too high. Better a lower action even for a slide guitar unless you're building to lapsteel specification?

As you said they're new strings I won't suggest avoiding using old strings.

Last one I can think of right now is make sure you're tuning to the correct octave of GDg. Even with an electronic tuner it can be easy to tune past the correct octave tuning to a higher octave that the strings weren't meant to tune to. Unfortunately I don't know what the correct octave is or whether your tuner gives a readout for octaves but generally you should be able to depress the strings without too much pushing.

Try these things and as mentioned I'm sure others will be around to help soon. Have a great day and best regards,

Bear :0)

Many thanks.   I'll check it all.

Art

the correct octave is G 2nd octave D 3rd and G 3rd. I got that from a book while trying to string my first build last weekend. It worked great!

This may help in the future courtesy of the amazing Cause the Blue Rat. I downloaded it for my own reference. Click on the picture for info too.

Thank you.   That's good info.

Art

Deburr with fine sandpaper, I’m sure it’s a sharp point somewhere? Tuners can have sharp edges? Good luck.

Thanks Brian.   That was suggested earlier.   I think it's the most likely.

Arthur, I have been using .044, ,034 & .026 and have never broken a string. Generally build to a 25.5" scale and tune G,D,G.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Discussion Forum

Fret sizes.

Started by neddy. Last reply by neddy 3 hours ago. 3 Replies

Too far gone??

Started by T-Gripped. Last reply by Tim Pannabecker yesterday. 6 Replies

Scarf joint headstock

Started by Lou Ellis. Last reply by Taffy Evans Oct 9. 5 Replies

Help with first tuning procedure.

Started by James Pobog. Last reply by James Pobog Oct 4. 2 Replies

2 string cbg

Started by Dickie. Last reply by BrianQ. Sep 1. 5 Replies

A simple tuning peg question

Started by Warren Williams. Last reply by MadGomer Aug 26. 6 Replies

How could this be?

Started by stephen davies. Last reply by stephen davies Jul 9. 2 Replies

Grounding

Started by Robert M J Loftus. Last reply by stephen davies Jun 30. 6 Replies

Pickup Placement on High G Ukulele

Started by Chris Sturhann. Last reply by Chris Sturhann Jun 19. 2 Replies

Shipping

Started by Virginia Bill. Last reply by Jim Brown Jun 12. 4 Replies

Neck Bowing?

Started by Craig Cole. Last reply by Craig Cole Jun 11. 11 Replies

Springs in an acoustic cbg

Started by Will "KOOL DOG HOOCH" Bonner. Last reply by Will "KOOL DOG HOOCH" Bonner Jun 1. 8 Replies

Weird Little Install Issue

Started by Craig Cole. Last reply by Craig Cole Jun 1. 5 Replies

CBGitty Amp kit

Started by Art Prior. Last reply by Paul Craig May 31. 4 Replies

Earthing Strings

Started by mitch jones. Last reply by mitch jones May 18. 7 Replies

Like a box of chocolates

Started by Michael shrader. Last reply by Michael shrader May 11. 3 Replies

Intonation problem

Started by Ramson. Last reply by Will "KOOL DOG HOOCH" Bonner May 3. 14 Replies

Pure and simple CBG

Started by Bill McNamara. Last reply by Craig Cole Apr 30. 6 Replies

Scale length for 17" box

Started by Will "KOOL DOG HOOCH" Bonner. Last reply by Denbo Apr 30. 29 Replies

Pickup to string distance

Started by Lou Ellis. Last reply by Lou Ellis Apr 9. 8 Replies

Blog Posts

Tab for Ry Cooder

Posted by Keith Gibson on September 30, 2019 at 12:44pm 2 Comments

Ducktail Run in James Dean Country

Posted by Rick Tish on September 29, 2019 at 9:57pm 1 Comment

Tiki mask guitar

Posted by Phil Stickings on September 27, 2019 at 12:39pm 5 Comments

Festival in the land that time forgot

Posted by Rick Tish on September 23, 2019 at 10:09am 2 Comments

Latest Activity

Will "KOOL DOG HOOCH" Bonner replied to Paul Craig's discussion What's on your workbench?
"Masonite is what I'm sure you're thinking. I'm wondering about the resonating…"
32 minutes ago
MadGomer replied to Paul Craig's discussion What's on your workbench?
"Normal isn't any fun, carry on and keep the pictures coming!"
1 hour ago
Adam Seelig left a comment for BrianQ.
"Hey Brian! Thanks for the warm welcome! Sorry for the delay but I have been crazy busy but hope to…"
1 hour ago
Jerry Jordan commented on Bob "Ambrose" Negus's photo
Thumbnail

"Little Roarer"

"9.9 out of 10 .,.,one of the prettiest I have seen.,.,looks like it would play and sound great.,.,I…"
1 hour ago
Jerry Jordan commented on Smoothead's photo
Thumbnail

3 string

"Nice..,"
1 hour ago
Jerry Jordan commented on Daniel Walter's photo
1 hour ago
Jerry Jordan commented on David Hopkins's photo
Thumbnail

IMG_2071

"excellent execution of a fun design.,,.I bet she sounds good.,., reminds me of a Teuffel…"
1 hour ago
Dave Lynas commented on Dave Lynas's video
Thumbnail

Rumblin Slide Bass Blues

"Jason. Thanks for the great show of your Driftwood guitar in the hands of a Master!"
3 hours ago
Dave Lynas commented on Dave Lynas's video
Thumbnail

Rumblin Slide Bass Blues

"Thanks Denbo. I’ll be jammin it at the Wilma Town Hall on Saturday for the Duxbury Fall Fest.…"
3 hours ago
Dave Lynas liked BUGGY (C)'s video
3 hours ago
Dave Lynas liked Jason Mills's video
3 hours ago
Dave Lynas commented on Jason Mills's video
Thumbnail

Larry McCray Saginaw River Driftwood Jam

"Me too Denbo. My fingers hurt. Good though. Awesomeness before us. Thanks Jason."
3 hours ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->