I am new to this forum and am building my first CBG.    I'm planning on a "through the box" neck and need to know if space should be left inside the box between the box top and the neck.   I've looked at a number of plans and this is never quite clear.   Also, what is the recommended way to make sure the box is properly secured to the neck?   Any help/suggestions greatly appreciated.

Art.

Views: 281

Replies to This Discussion

I don|t think there is any reason to have a space between the neck and top, in most case you would securely adhere the neck along it|s entire length to the box top. Sometimes people like to have the ability to have the box open up in which case it is only the neck top that holds the neck. I think you will see it clearly in Youtube videos about cbg builds

Thank you Brian

Leave a slight space except for the ends, and maybe right under the bridge, so the top can resonate.
Mount a block of wood under the neck at each end of the box to fasten it.

Thank you for that.   I will leave a gap.

My first I glued the neck to the top and it sounds great - still - after 5 years

All the rest I left a gap between the neck and the box except for the ends - acoustically they all still sound great my customers tell me - no complaints.

From where I sit it seems not to matter - but I now always leave a gap.

The neck is screwed into a brace at both ends, which is then screwed into the ends of the box. This leaves a clean top no screws visible. My preference.

 Many thanks Joe for your info.    I will leave a gap at the top of the box.  

Art

Contrary to  popular  belief   that  you will  get   better  resonation    with  a space    ,   I  believe   gluing  right to  the top   resos  the  whole  guitar  as   one   much   better  .  Most   that have tried    the same  exact  box  trying both  ways     , say the one glued to  the lid actually sounded better .  many  also  say they can't     see the difference   . I have seen  experienced builders that swore by leaving a space , change their mind after trying glued  or screwed right to the lid once . 

(more on the topic ) https://cigarboxnation.com/forum/topics/neck-touching-inside-of-box...

(even copy and pasted my own answer  ) lol. 

 I've tried leaving the gaps in on most of my builds...but only on the standard 'neck-thru' builds.

 I've also tried the 'Uncle Crow' method of placing the entire stick on TOP of the Soundboard-but since that isn't an actual 'stick-thru' build (the end of the stick usually terminates half-way down the box, leaving more box to vibrate) I can't tell if either method makes a difference...

  The only way i'm ever going to be knowledgeable about this question is if i ever-

-find three identical boxes with identical tones (difficult)

-make three identical necks (one with a pre-cut space)

-make two neck-thru and one 'Uncle Crow' style guitar, with identical soundholes.

 

 Sounds like fun, right? :D  At any rate, all three should play pretty well-have fun!

Remember to send them all to me   ... ummm.. to  " test"  ;-D

Ok... So the best ukulele I have build have neck glued directly to top (not entirely neck-thru, the neck ends ain about 2/3 of the box length).

But best diddely bow has space left under the top (neck-thru).

I have two CBGs with neck-thru and without any space - the top is just laying on the neck - no glue, screws or anything. I fell that he neck is quite secure because the string tension presses the top to the neck underneath.

Right now I would build one with space - but just out of curiosity rather than anything else.

A couple of my good builds were having the neck attached to the top, of the soundboard/CB lid.  They are easy to build and sound great.   I have also attached to the underneath of lid, with either glue or screws.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Discussion Forum

Intonation problem

Started by Ramson. Last reply by Ramson on Tuesday. 11 Replies

Pickup to string distance

Started by Lou Ellis. Last reply by Lou Ellis Apr 9. 8 Replies

What strings should be used for 4 string cbc tuned to GDGD?

Started by Will "KOOLDOG HOOCH" Bonner. Last reply by Paul Craig Apr 8. 3 Replies

Springs in an acoustic cbg

Started by Will "KOOLDOG HOOCH" Bonner. Last reply by the anonymous pick Apr 7. 3 Replies

Bonehead rookie mistake

Started by Michael shrader. Last reply by Will "KOOLDOG HOOCH" Bonner Apr 7. 24 Replies

Neck, sound hole, strings and Bridge question.

Started by Will "KOOLDOG HOOCH" Bonner. Last reply by Will "KOOLDOG HOOCH" Bonner Apr 4. 9 Replies

Power tools - what buy next?

Started by Charles Z. Last reply by John Sawyer Apr 4. 6 Replies

Fretboard radius, is it to late?

Started by Ramson. Last reply by Ramson Mar 26. 7 Replies

Help

Started by Pat Welch. Last reply by Tim Pannabecker Feb 26. 7 Replies

Hard- tail bridge question

Started by Arthur Payne. Last reply by Tim Pannabecker Feb 26. 7 Replies

Space between Box top and Neck?

Started by Arthur Payne. Last reply by Tim Pannabecker Feb 25. 11 Replies

Tuning ptoblem

Started by Arthur Payne. Last reply by Arthur Payne Feb 14. 14 Replies

Wooden bridges for CBG

Started by Lou Ellis. Last reply by Lou Ellis Feb 13. 5 Replies

Volume Is On When Knob Is Turned Off

Started by Steve Allen. Last reply by Steve Allen Jan 13. 9 Replies

Adjustable bridge problem

Started by Arthur Payne. Last reply by BrianQ. Dec 12, 2018. 6 Replies

Bloomin' wiring again! Pulling my hair out haha

Started by Slow Blues Dani & Ol' Grey Bear. Last reply by Slow Blues Dani & Ol' Grey Bear Dec 10, 2018. 14 Replies

Build 4 - buzz from inside body?

Started by Sean Murphy. Last reply by Sean Murphy Dec 1, 2018. 5 Replies

Mini Humbucker wiring

Started by Arthur Payne. Last reply by BrianQ. Nov 22, 2018. 1 Reply

Latest Activity

Chris Lyons commented on Chris Lyons's photo
Thumbnail

Shiny

"Thinking about putting a chrome 3 string bridge on this one."
33 minutes ago
Chris Lyons commented on Chris Lyons's photo
Thumbnail

Fretless Face

"The wood ruler on this one actually made it sound fuller so I put one on Shiny Top."
35 minutes ago
Chris Lyons commented on Chris Lyons's photo
Thumbnail

Different but same

"Thanks bud. I lost count at 40 hours. I got a few more pre build pics too. Thanks again for the…"
37 minutes ago
Bruce Young posted photos
55 minutes ago
micky rooney replied to micky rooney's discussion aluminium bobbins
"Thank you,JL.I think I will stick with making bobbins from plastic or wood..."
57 minutes ago
Andries D. EKER commented on Andries D. EKER's video
Thumbnail

Steady Rolling Man (acoustic) A. D. Eker 2019

"Thanks Derek ! appriciate your like !"
59 minutes ago
Andries D. EKER commented on Del Puckett's video
Thumbnail

Cigar Box Guitar - MAGIC

"Fun Dell , i was under the inpression that your Daughters whoed pop up ! but the video link did not…"
1 hour ago
Andries D. EKER commented on Jim Morris's video
Thumbnail

Cookie Tin Banjo - Magpie

"Magic Vingers ! Fine reel there Jim ! for me your still the all king Player ,on the…"
1 hour ago
Andries D. EKER commented on Dave Lynas's video
Thumbnail

Tom Maloney at Art For Earth Day

"Great Spirit there dave! pitty about the japping! thanks for the ecserpt! fine picker!"
1 hour ago
Andries D. EKER commented on Derek Rose's video
Thumbnail

All the Light from the Sun

"Did not exspect a love song! whit that titel ,its a somber message ,and you bring it so…"
1 hour ago
Andries D. EKER commented on Andries D. EKER's video
Thumbnail

On the Corner Retronaut Bone&Fiddle A. D. Eker 2019

"But i did build one before from a billiards q ,but the skin broke did not stand the pressure, got…"
1 hour ago

CigarBoxGuitar.com Knowledgebase Articles

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->