I've been without my workshop for almost a year now and am finally close to having it back! I promised my brother-in-law a CBG for his birthday last summer and am getting ready to start on it. 

I've got my box picked out and I picked up a neck and fretboard from CB Gitty and am starting to plan the build out (side question: how much planning to most folks do on their builds? My first three were pretty seat-of-the-pants, on-the-spot stuff but I'm trying to really diagram this one out and build it to a plan).

My question is this - what are the relative merits of either using a separate fretboard attached to the neck, vs. just fretting the neck itself? (This is of course ignoring unfretted necks or necks with frets just marked). It occurred to me when I was trying to get the neck flush with the top of the box that the fretboard would then be raised above the top of the box, which then got me to thinking about why have a separate fretboard at all? I mean, I like 'em and they can be quite pretty...but what's the benefit of that vs. just fretting the neck itself?

Views: 141

Replies to This Discussion

Hey Sean.

As far as I'm aware folk use fretboard for these instruments because they're mostly a stick in a box and for ease of use rather than notching out a whole load of neck. For one it adds height above the box which means more room for the fingers to pick. Also for strengthening the neck with the extra thickness. Then you've got the aesthetics like you mentioned. Plus, make a mistake on a fretboard and all you got to do is replace the fretboard rather than a whole neck.

On factory guitars I guess fretboard are also necessary for hiding truss rods.

If you fancy fretting the neck and it's sufficiently thich I see no rules that have to be adhered to. After all, it's your build, right?

Have fun and all the best to you.

Bear :0)
First congrats on getting your shop back. I dread moving in a few years I’ll go what you’ve been through.

My 2 cents worth - I put a lot of work into my head stocks and necks. If I then screw up the fret slot cutting, that’s work down the drain. Yes I have screwed up fretboards cutting slots but that was just the fretboard - my neck board was still good.

Drilling fret dots is easier on the fretboard - it’s flat. I’m curious also to hear what others do.

As to planning - I diagram everything - the box, the neck board - with dimensions - I find it is keeping surprises and rework way down. I’m currently on build 14.


The Essential Pages

New to Cigar Box Nation?How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor


Recommended Links & Resources

Discussion Forum

Wooden bridges for CBG

Started by Lou Ellis. Last reply by Lou Ellis Jan 14. 3 Replies

Volume Is On When Knob Is Turned Off

Started by Steve Allen. Last reply by Steve Allen Jan 13. 9 Replies

Hard- tail bridge question

Started by Arthur Payne. Last reply by Arthur Payne Jan 6. 4 Replies

Adjustable bridge problem

Started by Arthur Payne. Last reply by BrianQ. Dec 12, 2018. 6 Replies

Bloomin' wiring again! Pulling my hair out haha

Started by Slow Blues Dani & Ol' Grey Bear. Last reply by Slow Blues Dani & Ol' Grey Bear Dec 10, 2018. 14 Replies

Build 4 - buzz from inside body?

Started by Sean Murphy. Last reply by Sean Murphy Dec 1, 2018. 5 Replies

Mini Humbucker wiring

Started by Arthur Payne. Last reply by BrianQ. Nov 22, 2018. 1 Reply

Power tools - what buy next?

Started by Charles Z. Last reply by Charles Z Nov 10, 2018. 3 Replies

Separate fretboard vs. fretted neck?

Started by Sean Murphy. Last reply by Joe Caruso Nov 3, 2018. 2 Replies

Canoe Paddle Questions

Started by T-Gripped. Last reply by BrianQ. Nov 2, 2018. 2 Replies

Bass Tuning Machine Layout Information

Started by Dean-O Rochester Oct 30, 2018. 0 Replies

Strings snapping on new build

Started by Arthur Payne. Last reply by Gerald Schwenke Oct 26, 2018. 8 Replies

Hard tail bridge saddle screws

Started by Walter Haapapuro. Last reply by Thomas "Duck" Petry Oct 24, 2018. 3 Replies

Space between Box top and Neck?

Started by Arthur Payne. Last reply by Tomasz Oct 22, 2018. 10 Replies

Power tools - what buy next?

Started by Charles Z. Last reply by Ben Ridgeway Oct 7, 2018. 3 Replies

fret wire and fret saw thickness

Started by Kurt Oravetz. Last reply by Kurt Oravetz Oct 7, 2018. 6 Replies

What kind of wire?

Started by Andy Busch. Last reply by BrianQ. Sep 9, 2018. 3 Replies

looking for sound hole advice

Started by Brendt Evenden. Last reply by Brendt Evenden Sep 7, 2018. 4 Replies

strings in bulk

Started by Seth Deitch. Last reply by BrianQ. Aug 19, 2018. 1 Reply

Double up strings

Started by larry kraus. Last reply by Brown Water Jerry (Rice) Aug 6, 2018. 1 Reply

Blog Posts


Posted by Allen on January 12, 2019 at 11:47am 5 Comments

Homemade Cigar Box Guitar Pickups

Posted by BeetleJuice! on January 10, 2019 at 6:30pm 0 Comments

The long and winding road

Posted by Will Carter on December 28, 2018 at 8:35am 2 Comments

Latest Activity

Derek Rose liked Jason Mills's video
34 minutes ago
Derek Rose commented on Jason Mills's video

Driftwood fretless three string

"Sounds great! Agree with Andries on the wha"
35 minutes ago
Derek Rose commented on Norbert's video

Micro CBG

"Sounding good Norbert."
37 minutes ago
Derek Rose liked Miku's video
38 minutes ago
Derek Rose commented on Miku's video

Electric Cigar Box Ukulele

"Nice art uke and fine playing."
39 minutes ago
Derek Rose liked Downtown Vinnie's video
40 minutes ago
Derek Rose commented on Downtown Vinnie's video
40 minutes ago
Jeff 'Bones' Reilly commented on Jeff 'Bones' Reilly's photo

Trouble in the Whitehouse ......

"I'm just telling it like 90 % of the world population is thinking really you prefer a wolf…"
40 minutes ago
Rogheff replied to Rogheff's discussion Looking for Acoustic Sound in the group Introduce Yourself!
"The project didn’t turn out as planned.  The copper pipes created a huge problem.…"
57 minutes ago
Derek Rose liked Downtown Vinnie's video
58 minutes ago
Derek Rose commented on Downtown Vinnie's video


"Nice church bell tones throughout, Good sounding therapy and hope you're feeling better soon…"
58 minutes ago
Rogheff posted photos
1 hour ago



© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://api.ning.com/files/Stym6V-ACBaiDP5ilIPA6bJ3rn0ZdlI1EwGHWgROvEkwiCCaNgzJRcZTZH8OGkV3fvK-NboXjThXltWFbcihM-jI4Mwz5SV3/scrollup_icon.png") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->