Hi all,

Doing my first angled headstock. The scarf cut was not perfect and the joint seam on the back of the neck is a little ratty looking. It’s not a smooth transition in to the neck. Any of have experience with cleaning up or hiding the seam? Or do I just sand the heck out of it? 

Mike

Views: 73

Replies to This Discussion

I would sand the rough parts flat until they match up? Are they glued together already? Pics? A good clamping, sharp blade & practice will help in long run? Don’t worry, it’s your 1st, next one’s gonna be better? BTW, I practiced on scrap before I actually did one for keeps? good luck :) https://www.youtube.com/watch?v=-5024VR40fg&list=PLQoYJG1ht92f3...

Sand it smooth and move on. As long as you have a good glue joint it's only aesthetic. You can always paint the headstock a solid color to mask the misalignment of the woodgrain if that's the main concern. They're never perfect.

One trick to sanding a a scarf joint is to use a sanding block, instead of sanding back and forth you sand in a circle. Back and forth you have double pressure in the ends and there is always a gap. In a circle it remains flat. Can't wait to see your #1! 

Forgot to add, the paper bands wrapped around cigars are great for covering up boo boos?

Thanks to all who responded to my question. My problem is with the feathered edge on the back of the neck. I ended up taking a small file and working it until it looked better. Not perfect but I’ve decided it’s just a character addition and likely no one will notice except me. Still working on getting over my “perfectionist “ problem when building. This is my sixth build and not one has been perfect and not one person has commented on it! 

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Discussion Forum

Fretting for beginners

Started by Michael Myers. Last reply by MadGomer on Friday. 3 Replies

Adjusting the action on a cbg 3 string.

Started by rick schoen. Last reply by Tim Pannabecker on Monday. 8 Replies

Fitting Frets

Started by neddy. Last reply by Taffy Evans Nov 10. 6 Replies

Joinery suggestions for hand-made boxes

Started by Chris Wharton. Last reply by MadGomer Nov 10. 33 Replies

Tuner and nut question.

Started by Bill. Last reply by Gus K Nov 6. 12 Replies

Help with first tuning procedure.

Started by James Pobog. Last reply by Mark Bliss Nov 6. 3 Replies

Too far gone??

Started by T-Gripped. Last reply by Mark Bliss Nov 6. 7 Replies

Pickup query

Started by Arthur Payne. Last reply by Arthur Payne Nov 6. 11 Replies

How do I use this string tension calculator?

Started by Warren Williams. Last reply by BrianQ. Nov 4. 3 Replies

How could this be?

Started by stephen davies. Last reply by stephen davies Oct 28. 5 Replies

Is EBE tuning more tension or less?

Started by Warren Williams. Last reply by Warren Williams Oct 24. 4 Replies

Rough scarf joint seam

Started by Michael shrader. Last reply by Michael shrader Oct 23. 5 Replies

Fret sizes.

Started by neddy. Last reply by neddy Oct 18. 13 Replies

Scarf joint headstock

Started by Lou Ellis. Last reply by Taffy Evans Oct 9. 5 Replies

2 string cbg

Started by Dickie. Last reply by BrianQ. Sep 1. 5 Replies

A simple tuning peg question

Started by Warren Williams. Last reply by MadGomer Aug 26. 6 Replies

Grounding

Started by Robert M J Loftus. Last reply by stephen davies Jun 30. 6 Replies

Pickup Placement on High G Ukulele

Started by Chris Sturhann. Last reply by Chris Sturhann Jun 19. 2 Replies

Latest Activity

Dave Lynas commented on Dave Lynas's video
Thumbnail

Tooth for a Tooth

"Thanks Pick, thanks Daniel. Yup, Jim Hall’s concert was wonderful, humbling, and still…"
6 minutes ago
PauL posted a status
"Today I have worked on me #4....from 5 AM, put in a piezo...Nice sounds..really"
1 hour ago
PauL posted a status
"Hey everyone! many thanx to all who appreciated the Pickwick vid. Too many to thanx singularly.. but ...hey!! have a great day!!"
1 hour ago
Metal hic liked Miku's photo
2 hours ago
Metal hic commented on Miku's photo
Thumbnail

Miku 4 Amped

"Looking for good sound ;) Love this one!"
2 hours ago
Termoking posted photos
2 hours ago
Metal hic liked Miku's photo
2 hours ago
Metal hic liked Miku's photo
2 hours ago
Metal hic liked Andries D. EKER's photo
2 hours ago
Metal hic commented on PauL's video
Thumbnail

⭐FIVE STRINGS CBG !! ! The Pickwick Update ⭐

"Nice one! like to hear her sound too "
2 hours ago
Spencer Lockhart liked Bernie Edwards's photo
3 hours ago
Spencer Lockhart liked Bernie Edwards's photo
3 hours ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->