Started my first CBG kit build yesterday (12/9), full CBG kit.

First, making a mockup neck to figure things out.


Want to  use hardtail and surface mount thin humbucker (like Wickedbucker).

Angle molding corner bracing a la Shane.

Neck supports both ends.

Butt end of neck will remain internal, no notch to cut,

1/4" birch plate to re-enforce  hardtail mount.

Going to build dummy neck first to work out kinks.

Two areas of concern, I'm having a hard time visualizing this. 1. Neck butt end will need  a clearance cut for the birch hardtail support plate, right? 2. The surface mount pup....I think they're about 1/4" thick, right? So I think that means that the entire butt end relief needs to be deepened 1/4" or more so that the fretboard is no longer level with the top, but raised to a level higher than the pup, right? That also means the neck notch will be shallower, right? So I think the cut sequence should be to cut the neck clearance to set fretboard height above the pup, then cut the hardtail support plate clearance to fit.

Since this will be a mag pup, not piezo, does the underside of the lid still need to 'float', or can it be in contact with the neck?

Views: 114

Replies to This Discussion

Easier to visualize if you included pics. define hardtail, do you mean a 3 string bridge? fyi, all guitars without a tremelo are hardtail? The reason for lid clearance doesn't have anything to do with pickups, it allows for acoustic vibration across the box, making it louder? 

Yep, a 3-string metal bridge. So, of it were to be only electric, I don't need clearance, but if it were to be played either way, have a slight gap?

I'm saying that whether it has a pickup or not , it needs clearance between the lid? The box is thick enough to handle that bridge? Maybe you might check out some Del Puckett videos, he covers some of these basic topics?

Cool. Thx.

BrianQ is leading you down a good path. Clearance between the lid and the neck really isn't a concern if you don't intend to play it acoustically. As you raise the neck to have your fretboard above the lid and high enough for the strings to clear the pup by an appropriate amount, your bridge will need to be taller too, so depending on what kind of bridge they include with the kit you may need to rework that or build one on your own.

Using this one, with a wickedbucker-type pup with matching cover.



Finished the dummy neck last night. It's gonna really help setting things up.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Discussion Forum

Yardstick Fretboards

Started by Jim Codog. Last reply by Gus K Feb 17. 9 Replies

Snake oil pick up install question

Started by Michael shrader. Last reply by Gus K Feb 17. 1 Reply

Too far gone??

Started by T-Gripped. Last reply by Gus K Feb 17. 10 Replies

Walnut overload

Started by 3 Chord Ziggy. Last reply by 3 Chord Ziggy Feb 16. 21 Replies

Questions on a first time electric build.

Started by Michael shrader. Last reply by John Mark Perchalski Jan 27. 4 Replies

Questions about CBG details...

Started by James Pobog. Last reply by James Pobog Dec 13, 2019. 8 Replies

Magnetic Pickups - What's good

Started by Jim Codog. Last reply by Jim Codog Dec 12, 2019. 7 Replies

General wiring question

Started by James Pobog. Last reply by James Pobog Dec 9, 2019. 5 Replies

Soldering/grounding plan

Started by T-Gripped. Last reply by Gus K Dec 7, 2019. 7 Replies

I'm gonna need help...

Started by James Pobog. Last reply by MadGomer Dec 6, 2019. 4 Replies

Building my first CBG....

Started by James Pobog. Last reply by James Pobog Dec 4, 2019. 6 Replies

About neck thru....

Started by James Pobog. Last reply by John Mark Perchalski Dec 4, 2019. 1 Reply

Fitting Frets

Started by neddy. Last reply by Taffy Evans Nov 27, 2019. 8 Replies

Joinery suggestions for hand-made boxes

Started by Chris Wharton. Last reply by MadGomer Nov 23, 2019. 43 Replies

Fretted....

Started by Jim Codog. Last reply by Jim Codog Nov 20, 2019. 5 Replies

Connecting a guitar jack?

Started by rick schoen. Last reply by David Clewell Nov 17, 2019. 5 Replies

Fretting for beginners

Started by Michael Myers. Last reply by MadGomer Nov 14, 2019. 3 Replies

Adjusting the action on a cbg 3 string.

Started by rick schoen. Last reply by Tim Pannabecker Nov 11, 2019. 8 Replies

Tuner and nut question.

Started by Bill. Last reply by Gus K Nov 6, 2019. 12 Replies

Latest Activity

Doug Krantz liked Dave Lynas's video
13 minutes ago
Gentrified_Guitar replied to Jon's discussion How to sell cigarbox guitars
"I'm new to CBG and just lurking.  I'm not a builder nor seller.  Just giving my…"
30 minutes ago
Derek Rose liked Poorness Studios's video
1 hour ago
Derek Rose commented on Poorness Studios's video
Thumbnail

The Hardest Button to Button

"Awesome all around on this. Cool cover and great playing."
1 hour ago
Derek Rose commented on Soap Box Blues's video
Thumbnail

- Old Time Cigar Box Guitar Blues - Homemade Lo-Fi Recording

"Sounds great John. Love that acoustic tone. Has a little reso quality. Nice playing too."
1 hour ago
Derek Rose liked Soap Box Blues's video
1 hour ago
Derek Rose commented on Derek Rose's video
Thumbnail

After the Sun Goes Down

"Thanks much for the kind comments Andires! I am ready to hit the road with guitar in hand and meet…"
1 hour ago
Gentrified_Guitar joined Thomas "Duck" Petry's group
Thumbnail

Curmudgeons of Cigar Box Nation

A place for all of us disgruntled old farts to gather and do curmudgeonly things. Stand up and…See More
1 hour ago
Gentrified_Guitar joined JUJU's group
Thumbnail

"Special Tools " Either Bought or Homemade

Hi YallThought it would be good for us all to share what Special tools we have or need , just to…See More
1 hour ago
Gentrified_Guitar joined Andy Stone's group
Thumbnail

CBG wiring & electronics.

Want to plug that thing in? Here's a place to share ideas about pickups (Both magnetic and piezo)…See More
1 hour ago
Andries D. EKER commented on Poorness Studios's video
Thumbnail

The Hardest Button to Button

"Out the ballpark whit this one Poorness! cool job on the Can mic! the effect for this track! thight…"
1 hour ago
KOOL DOG HOOCH replied to JP Lace Master's discussion Collection Thread: show me your collections
"Good grief Taff! Do you have a life or do you get bored in the outback? :-) Here I was proud of my…"
1 hour ago

Music

Loading…

© 2020   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->